Search results

From DD-WRT Wiki

You searched for Hard_reset_or_30/30/30/ja

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below 54 results starting with #1.


View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. Linksys EA6500 V1 (23,843 bytes)
    17: ...om/betas/2017/08-03-2017-r33006/linksys-ea6500/ r33006]'''</font><br><sup>''--[[User:EA6500v1|EA6500v1...
    50: | 450 Mbps + 1300 Mbps (1750 Mbps)
    110: ...]] (the infamous [[Hard_reset_or_30/30/30 | 30-30-30]]). Doing so can erase the CFE (bootloader) and b...
    154: SHA-256: E2A95AA4133C5B5F28D92FE0543CB5486301BCD83A23BF354A74E3B7FCD5162C
    180: ...F74E346549805A3AD13943FB3C15B0F3931A992EB9B60CE6543085AD21552
  2. Linksys WRT610N (11,615 bytes)
    2: ... Linksys device (replaced by the [[Linksys E3000|E3000]]) with the following features:
    5: * v1 300 MHz ([http://www.broadcom.com/products/Wireless-...
    57: #[[Hard_reset_or_30/30/30|Hard reset]]
    62: #[[Hard_reset_or_30/30/30|Hard reset]] again
    109: ...ce is enabled, which have been experienced from r13064 to r14929 so far. When wl1 is enabled and WPA i...
  3. Asus WL-500g Deluxe (2,713 bytes)
    10: #Do a proper [[Hard_reset_or_30/30/30|hard reset]]. '''Do not confuse the red 'EZ Setu...
    11: #Do a second 30-30-30 reset, but do not power cycle it at the end. Thi...
  4. Netgear WNR3500L (4,176 bytes)
    25: *Perform a [[Hard_reset_or_30/30/30|hard reset]] on the router.
    39: ...loads/betas/2020/05-05-2020-r43055/broadcom_K3X/ 43055])<br>
  5. Installation (20,950 bytes)
    91: ...arkred>WARNING: some devices should not use 30/30/30, including all ARM devices.</font>
    92: ...the reset button until the lights flash (or up to 30 sec). Be careful when using this method! Research...
    94: ##Javascript is required for the Web interface. Try a ...
    95: ...]]. If still having issues, [[Hard_reset_or_30/30/30#Erasing_NVRAM|erase the nvram]].
    156: ...2018 (35770 and later). See [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]] for details.
  6. Linksys WRT54G v2.2 (1,689 bytes)
    12: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router
  7. Firmware FAQ (40,468 bytes)
    26: ....to/2PY6SRx '''TP-Link Archer C7'''] - 802.11ac (1300 + 450 Mbps), easy to recover, fairly cheap, (v2-...
    29: .../2TRtcuj '''Buffalo WZR-1750DHPD'''] - 802.11ac (1300 + 450 Mbps), DD-WRT preinstalled, 512MB RAM and ...
    65: ...t, and k3.10+ supports SFE accelerated NAT since 33006
    109: ... See [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. Rese...
    121: ... See [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]].
  8. Reset And Reboot (4,732 bytes)
    5: === Hard Reset ("30 reset")===
    11: ...while the router is on, and keep holding it about 30 seconds. On different models you may see rapid fl...
    15: === Hard Reset ("30/30/30 reset")===
    19: [[Hard_reset_or_30/30/30|How to do a "30/30/30 reset"]]
    21: ...d keep holding the reset button for an additional 30 seconds. This will wipe the nvram out. Keep in mi...
  9. Linksys WRT54GS v5.0 & 5.1 & 6.0 (3,659 bytes)
    19: ...Do a [[Hard_reset_or_30/30/30|hard reset]] (30/30/30)
  10. Installation/ja (27,080 bytes)
    18: ...スの一覧については、'''[[Firmware FAQ/ja#.E3.81.A9.E3.81.AE.E3.83.AB.E3.83.BC.E3.82.BF.E3....
    54: ...nd basic techniques such as [[Hard_reset_or_30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/...
    58: #Do not try to skimp on the [[Hard_reset_or_30/30/30]] reset before or after each change to your route...
    95: ## '''Use [[Hard reset or 30/30/30]].'''
    97: ...30/30]]; this appears to be referring to a simple 30-second reset - [[User:Clock|clock]]). Be careful...
  11. Linksys WRT54G2 v1.0 (18,520 bytes)
    81: ...stalling Eko's 13000 NEWD Micro Plus w/ SSH (Sept 30, 2009). [See [[Linksys_WRT54G2_v1.0#Micro_builds...
    102: ...the rest of these steps, do a HARD RESET or 30/30/30!
    128: A- Power off (unplug) the router and wait for 30 seconds. Make sure to hold the tip of a pointy ob...
    155: 64 bytes from 192.168.1.1: icmp_seq=3092 ttl=100 time=1.074 ms
    156: 64 bytes from 192.168.1.1: icmp_seq=3093 ttl=100 time=0.717 ms
  12. 安装 (16,952 bytes)
    52: ...[[Factory Defaults|出厂默认设置(含30/30/30硬复位大法)]]===
    53: .......最好按以下介绍实施硬复位或 30/30/30 复位)
    65: # 按住路由器后部的复位按钮30
    68: ...复位)'''【即插电30秒 断电30秒 再插电30秒】
    70: ...位按钮30秒,保持按住的状态拔掉电源30秒,然后同样保持按住的状态重新插...
  13. Installation/fr (33,890 bytes)
    52: ...ialisation matérielle ou réinitialisation 30/30/30]] et tftp [http://www.dd-wrt.com/wiki/index.php/T...
    56: ...ialisation matérielle ou réinitialisation 30/30/30]] avant ou après chacune des modifications appo...
    100: ...ialisation matérielle ou réinitialisation 30/30/30]]'''.
    102: ...30/30/30]]; mais à une simple réinitialisation 30 secondes - [[User:Clock|clock]]). Soyez très pr...
    111: ... utiliser l'interface Web, il vous faudra valider Javascript et désactiver toutes les restrictions de...
  14. Linksys E1550 (3,454 bytes)
    12: | 300 MHz
    27: | 300 mbps
    48: # Do a [[Hard_reset_or_30/30/30|reset]]
    55: # Do a [[Hard_reset_or_30/30/30|reset]]. Another power cycle after the reset migh...
    75: ...ld finish, you will then need to do another 30-30-30 reset and then access the stock webgui @ 192.168....
  15. Netgear R6400v1 (2,598 bytes)
    6: The hardware is almost identical to a Netgear R6300v2, but has external antennas and different FCC a...
    27: | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)
    49: '''<font color=red>DO NOT "30-30-30" Reset ARM Devices!</font>'''
    61: ...bled) to the device and see [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]], as this is build-d...
  16. Hard reset or 30/30/30 (5,274 bytes)
    1: {{Languages|Hard_reset_or_30/30/30}}
    19: ...r=maroon>'''DO NOT''' attempt to hard reset/30-30-30 or erase the nvram on a Linksys EA series router ...
    29: .... See below for what to do: [[Hard_reset_or_30/30/30#Hard_Reset_on_ARM_and_other_newer_routers|Hard Re...
    36: ==30/30/30 reset==
    41: ...ess and hold the reset button on back of unit for 30 seconds
  17. Linksys WAP54G (10,094 bytes)
    65: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
    72: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
    107: ...er, then perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] on it
    115: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
    132: ...message, perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] then try to TFTP the micro build as ...
  18. Linksys WRT54GL (7,215 bytes)
    8: *'''CPU''': Broadcom BCM5452 at 200 MHz (130nm process)
    14: cpu model : BCM3302 V0.8
    55: # Do a [[Hard_reset_or_30/30/30|hard reset]] then login to the Linksys GUI at htt...
    90: ...t.com/wiki/index.php/Hard_reset_or_30/30/30 30/30/30] method<br>
  19. Linksys WRT350N (2,519 bytes)
    6: *CPU: Broadcom BCM4705 (300 MHz)
    16: ... next, such as Mega.bin. Remember to do the 30/30/30 Hard Reset after every successful flash. It is ab...
    21: # [[Hard_reset_or_30/30/30|Hard reset]] the router. You will not get a pass...
  20. Linksys WRT54GS v1.1 (1,466 bytes)
    7: #Perform a [[Hard_reset_or_30/30/30]] reset
    10: #[[Hard_reset_or_30/30/30]] again
    21: #Hard Reset 30/30/30
  21. Linksys WRT54G v2.0 (9,258 bytes)
    5: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router
    8: ... the router (unplug the power from the router for 30 seconds and then plug it back in)
    28: all set [Comment from jas3 on 16-Mar-2008: The above worked for me. I then...
    29: ...e do a full firmware reset (hold reset button for 30 seconds on power up). I did not do this when upgr...
    42: ... and don't seem to have any issues. I had to do a 30-second reset to log into the dd-wrt gui in IE but...
  22. Linksys WRT150N & WRT160N (8,075 bytes)
    12: ...generic] has been confirmed to work fine as well (Jan 2019)
    14: #Perform a [[Hard_reset_or_30/30/30|hard]] reset.
    21: #<strong>Perform another [[Hard_reset_or_30/30/30|reset]] on the router</strong> and wait to access...
    41: #Perform a [[Hard_reset_or_30/30/30|hard]] reset.
    46: ...ou must now perform another [[Hard_reset_or_30/30/30|hard]] reset. This time, when you navigate to 192...
  23. Linksys WRT54G2 v1.3 & WRT54GS2 v1.0 (5,285 bytes)
    23: #Perform a [[Hard_reset_or_30/30/30]].
    30: #Perform a [[Hard_reset_or_30/30/30]].
    40: #Perform a [[Hard_reset_or_30/30/30]].
    46: #Perform a [[Hard_reset_or_30/30/30]].
  24. Asus RT-N16 (18,355 bytes)
    5: ...sh ROM. Note that SFE accelerated NAT (K3X build 33006+) is required to achieve high WAN speeds with a...
    39: |up to 300Mbps
    63: ...e Factory Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]])
    65: ...e Factory Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]]) or via DD-WRT webGUI
    66: :* Upgrade to the temporary '''21530 K3X custom build''' (from 2013)
  25. Linksys WRT54G v8.0 & v8.2 (13,745 bytes)
    10: ...nd basic techniques such as [[Hard_reset_or_30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/...
    29: #Do not try to skimp on the [[Hard_reset_or_30/30/30]] reset before or after each change to your route...
    38: #Perform a [[Hard_reset_or_30/30/30]] reset.
    60: #Perform a [[Hard_reset_or_30/30/30]] reset again.
    89: ...r cycle of the router. (Unplug the cord, count to 30 and plug it back in.)
  26. Netgear WNDR3300 (18,349 bytes)
    3: ... Hardware [https://wikidevi.com/wiki/Netgear_WNDR3300v1 Specifications]==
    4: ...D: [https://fcc.io/PY308100078 PY308100078], PY307300072
    5: *Industry Canada ID: 4054A-07300072
    32: ...com/phpBB2/viewtopic.php?t=27684 New Netgear WNDR3300 support]
    36: ...wrt.org/oldwiki/openwrtdocs/hardware/netgear/wndr3300 OpenWRT wiki]: detailed information
  27. Netgear R6400v2 (2,478 bytes)
    26: | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)
    47: *R6400v2 ''U12H332T30_NETGEAR'': '''netgear-r6400v2otp''' directory
    58: <b><font color=red>DO NOT "30-30-30" Reset ARM Devices!</font></b>
    70: ...`nvram erase && reboot` for [[Hard_reset_or_30/30/30#Erasing_NVRAM build 35770 and later]].<br>
  28. Linksys WRT400N (3,467 bytes)
    26: | 300 mbps
    44: ...Do a [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] on the router
    47: ...e the router (uplug the power from the router for 30 seconds and then plug it back in)
    56: ...ther [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] on the router.
  29. Linksys E1000 (4,980 bytes)
    6: *CPU: Broadcom BCM4716B0 @300 MHz
    34: ...30/30/30 Reset on a Linksys E1000 v1.0|hard 30/30/30]]. This time, when you navigate to 192.168.1.1, c...
    42: #Perform a [[Hard_reset_or_30/30/30|normal 30/30/30 reset]].
  30. Linksys E2000 (7,786 bytes)
    23: | 300 mbps
    57: # Do a [[Hard_reset_or_30/30/30|hard]] reset.
    61: # Power cycle by unplugging E2000 for 30 secs.
    63: # Do a [[Hard_reset_or_30/30/30|hard]] reset.
    73: ** K3X builds newer than 33006 have SFE accelerated NAT
  31. Installation/it (26,496 bytes)
    27: ...https://it-it.facebook.com/omascilindriidraulici/ Jarvis]
    65: ...nd basic techniques such as [[Hard_reset_or_30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/...
    69: #Do not try to skimp on the [[Hard_reset_or_30/30/30]] reset before or after each change to your route...
    106: ## '''Use [[Hard reset or 30/30/30]].'''
    108: ...30/30]]; this appears to be referring to a simple 30-second reset - [[User:Clock|clock]]). Be careful...
  32. Firmware FAQ/zh cn (35,646 bytes)
    86: ...le for it yet. 见 [[Hard reset or 30/30/30|30/30/30硬复位大法]] 及 [[Reset And Reboot|重启和...
    96: ... flashing the firmware. See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].<br>
    149: ...或新固件之前做一下 [[Hard_reset_or_30/30/30|硬复位]] ,然后再进行刷新!
    157: ...etting hung-up (stuck). See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].
    164: ...ed to reset the router! See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].<br>
  33. 固件FAQ/zh cn (23,519 bytes)
    86: ... an article for it yet. See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].
    96: ... flashing the firmware. See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].<br>
    149: ...hich should include doing a [[Hard_reset_or_30/30/30|hard reset]] before and after flash!
    157: ...etting hung-up (stuck). See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].
    164: ...ed to reset the router! See [[Hard reset or 30/30/30]] and [[Reset And Reboot]].<br>
  34. Reset And Reboot/zh cn (4,877 bytes)
    5: === 硬复位 ("30秒复位法")===
    11: ...while the router is on, and keep holding it about 30 seconds. On different models you may see rapid fl...
    15: === 硬复位("30/30/30硬复位大法")===
    18: [[Hard_reset_or_30/30/30|How to do a "30/30/30 reset"]]
    19: 【即插电30秒 断电30秒 再插电30秒】
  35. Hard reset or 30/30/30/zh cn (4,123 bytes)
    1: ...ges|Hard_reset_or_30/30/30|硬复位(又名 30/30/30 复位大法)}}
    14: == = 硬复位(又名 30/30/30 复位大法) 应在每次升级固件 '''前'''...
    16: ...开30秒 不松开断电30秒 不松开再插电30秒】
    21: ...定的情况下,按住复位键'''不松开'''30
    23: ...不松开复位键''',拔掉电源,持续等30秒。
  36. Asus RT-N10U (9,643 bytes)
    2: As of (June 30, 2012) the DD-WRT Router database says CPU BCM535...
    15: ...load1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/08-30-2018-r36808/broadcom_K3X/ K3 R36808 folder link]
    23: .../802.11-Wireless-LAN-Solutions/BCM5357 BCM5357] @ 300MHz
    73: Also known as a "[[Hard_reset_or_30/30/30|Hard Reset]]" or "Restore to Factory Default sett...
  37. 30/30/30 method (36 bytes)
    1: #REDIRECT [[Hard_reset_or_30/30/30]]
  38. 30/30/30 (36 bytes)
    1: #REDIRECT [[Hard_reset_or_30/30/30]]
  39. Netgear WG602 v3/4 (2,722 bytes)
    8: [[User:Augur|Augur]] 11:34, 30 August 2010 (CEST)
    24: ...t.com/wiki/index.php/Hard_reset_or_30/30/30 30-30-30 Hard Reset]]
    48: #when the web gui comes up again perform a 30-30-30 hard reset
  40. WHR-G300N V2 (8,426 bytes)
    4: ...WHR-G300N v2 only. Go here for [[WHR-G300N | WHR-G300N v1]] instructions.
    8: ...d a first time flash file. You can flash the WHR-G300N V2 over the Buffalo web firmware update interfa...
    12: ...nslayer latest build folder and the "buffalo_whr_g300nv2" subfolder, and download the .bin file, choos...
    15: ...wing [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]], [[Reset_And_Reboot|Reset And Reboot]] and [[Fa...
    37: ...sh. I have used these myself to flash my own WHR-G300N V2 back to Buffalo firmware.
  41. 刷机 (18,418 bytes)
    59: ...[[Factory Defaults|出厂默认设置(含30/30/30硬复位大法)]]===
    60: .......最好按以下介绍实施硬复位或 30/30/30 复位——来自DD-WRT群 24539148的友情提...
    72: # 按住路由器后部的复位按钮30
    75: ...复位)'''【即插电30秒 断电30秒 再插电30秒】
    77: ...位按钮30秒,保持按住的状态拔掉电源30秒,然后同样保持按住的状态重新插...
  42. Hard reset or 30/30/30/it (2,269 bytes)
    1: {{Languages|Hard_reset_or_30/30/30}}
    3: Hard Reset (aka 30/30/30 reset):
    9: ...uto il tasto di reset (posto nel retro) per circa 30 secondi; successivamente, senza rilasciare il tas...
    11: ...ò, a router spento, ripremete il tasto reset per 30 secondi; poi, senza rilasciare il tasto reset, ri...
    13: ...ceso, premete nuovamente il tasto reset per altri 30 secondi; fatto ciò entrate nella pagina del rout...
  43. Serial Recovery (13,387 bytes)
    45: .../drivers/PL2303/PL2303_Prolific_DriverInstaller_v130.zip Prolific driver]
    46: ...12235626/http://prolificusa.com/drivers/PL2303/PL2303_Prolific_DriverInstaller_v1417.zip updated 1.4.1...
    53: ...IN-Module-Serial-Converter-Free-Cables-/201497833130 these].
    55: ...e link for the only prolific driver listed for PL2303:<br>
    84: ...inux->DD-WRT) reset command [[Hard_reset_or_30/30/30#Erasing_NVRAM]] depends on the build/date.
  44. Port Forwarding Troubleshooting (4,638 bytes)
    8: ...les rules that was fixed by [[Hard_reset_or_30/30/30| hard resetting]] and reconfiguring from scratch....
  45. Hard Reset (36 bytes)
    1: #REDIRECT [[Hard_reset_or_30/30/30]]
  46. Hard reset or 30/30/30/pt (2,766 bytes)
    1: {{Languages|Hard_reset_or_30/30/30}}
    3: ...===Hard Reset (Também conhecido como reset 30/30/30):====
    8: ...e o botão reset na parte traseira da unidade por 30 segundos
    9: ...set, desligue o aparelho e segurar reset por mais 30 segundos
    10: ... de volta AINDA segurando o botão reset por mais 30 segundos (note que este passo pode colocar dispos...
  47. Netgear WNDR4000 (7,463 bytes)
    23: | N750: 300 Mb/s (2.4Ghz)<br>450 Mb/s (5Ghz)
    44: #[[Hard_reset_or_30/30/30|Reset]] the router.
    72: ...r did newer k2.6 builds). It may be due to the (r43007 and newer) [https://forum.dd-wrt.com/phpBB2/vie...
    94: *nvram set clkfreq=530,265,132
    122: [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=308922 Broken reset button (WNDR3700v3 is identical)...
  48. Index:FAQ/ja (48,907 bytes)
    88: ...記事がありません。[[Hard reset or 30/30/30]]と[[Reset And Reboot]]を参照してくださ...
    99: ...をリセットします。[[Hard reset or 30/30/30]]と[[Reset And Reboot]]を参照してくださ...
    151: ...ラッシュの前と後で[[Hard_reset_or_30/30/30|hard reset]]が必要です。
    159: ...タック)しています。[[Hard reset or 30/30/30]]と[[Reset And Reboot]]を参照してくださ...
    168: ...る必要があります![[Hard reset or 30/30/30]]と[[Reset And Reboot]]を参照してくださ...
  49. Linksys E2500 (7,286 bytes)
    10: | 300 MHz ([https://wikidevi.com/wiki/Linksys_E2500_v3...
    25: | 300 Mbps (each radio: "N600")
    45: # Do a [[Hard_reset_or_30/30/30|hard reset]] using the small button on the bottom...
    52: # Do a [[Hard_reset_or_30/30/30|hard reset]] using the small button on the bottom...
    68: ...ww.dd-wrt.com/phpBB2/viewtopic.php?t=257957&start=30 this thread]. Otherwise follow the instructions a...
  50. D-Link DIR-868L (15,767 bytes)
    35: ...;**WARNING**:&nbsp;</span> DO NOT PERFORM A 30/30/30 VIA RESET BUTTON ON ANY BROADCOM ARM ROUTERS, YOU...
    72: ...t to default''' in webUI or [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erase NVRAM]] via command line inst...
    113: *'''DO NOT USE''' builds 30432 till 34311 (also applies to DIR-880L): see tic...
    163: <pre>Thu Jan 22 23:11:21 2015: INADYN: Started 'INADYN Advanc...
    164: Thu Jan 22 23:11:21 2015: INADYN: IP read from cache fil...
  51. Netgear R6300v2 (9,719 bytes)
    1: [[Image:Netgear_R6300v2_Front.jpg | right | 280px]]
    2: [[Image:Netgear_R6300v2_Back.jpg | right | 280px]]
    3: ... USE''' this guide for the MIPS [[Netgear_R6300|R6300 "v1"]].
    26: | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)
    41: =R6300v2 Versions=
  52. TP Link Archer C9 (15,608 bytes)
    1: [[Image:Archer-C9-01.jpg|right|300px]]
    175: ...RAM|nvram erase]] via telnet/ssh ('''Do not 30/30/30 an ARM router!''')
    203: ...RAM|nvram erase]] via telnet/ssh ('''Do not 30/30/30 an ARM router!''')
    234: ...RAM|nvram erase]] via telnet/ssh ('''Do not 30/30/30 an ARM router!''')
    249: [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=330769 TPLINK Archer C9 v5 unlock the protection]<br>
  53. Firmware FAQ/ja (38,399 bytes)
    18: *'''TP-Link Archer C7''' - 802.11ac (1300 + 450 Mbps)対応、復元が簡単で割と低...
    20: *'''Buffalo WZR-1750DHPD -''' 802.11ac (1300 + 450 Mbps)対応、DD-WRTインストール済...
    55: ...t, and k3.10+ supports SFE accelerated NAT since 33006
    96: ... See [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. Rese...
    108: ...は[[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] や [[Reset_And_Reboot|Reset And Reboot]]を見...
  54. Сброс 30/30/30 (9,467 bytes)
    1: {{Languages|Hard_reset_or_30/30/30}}
    20: ...ЙТЕСЬ''' выполнить сброс 30/30/30 или стереть NVRAM на маршрути...
    31: ...лайте аппаратный сброс 30/30/30 на любых маршрутизаторах н...
    38: == Cброс 30/30/30 ==
    39: '''Сброс 30/30/30''' (или Hard Reset) - процедура сб...

View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for