Search results

From DD-WRT Wiki

You searched for Firmware_FAQ/pl

Jump to: navigation, search

There is no page titled "Firmware_FAQ/pl". You can create this page.

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 20 results starting with #1.


View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. Asus WL-500g Deluxe (2,713 bytes)
    9: ...e generic files in the ''broadcom'' folder. See [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download ...
    11: ...nd. This puts the router into restoration mode. Plug a cable in the LAN port of the router to the co...
    25: ##If uploading via the web does not work, try tftp like in...
  2. Netgear WNR3500L (4,176 bytes)
    5: Read the [[Firmware_FAQ|Firmware FAQ]] and [http://www.dd-wrt.com/phpBB2/...
    24: ...the PC to the router's LAN port (recommended to unplug everything else)
    28: *Upload the special .chk firmware file.
    46: ...now this is a WIP, but in the interim, you can simply follow this guide to revert back:<br>
  3. Station Bridge (Routed) (4,967 bytes)
    12: ...adio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can be a Station Bridge while ...
    20: #*See [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    34: #* Click SAVE (not apply)
    36: #* Click SAVE (not apply)
    38: #* Click SAVE (not apply)
  4. Installation (20,950 bytes)
    2: ... DD-WRT on a router in most cases is almost as simple as installing a program onto your computer. Howe...
    7: Please check the [https://dd-wrt.com/support/router-...
    11: For a list of devices working with DD-WRT, please see '''[[Supported Devices]]'''.
    13: ...r a list of devices '''not''' working with DD-WRT please see '''[[Known incompatible devices]]'''.
    15: ...Brick_%28electronics%29 Bricking] your router''', please finish reading this entire page first. You w...
  5. Linksys WRT54G-TM (9,840 bytes)
    12: **Refer to the [[Firmware_FAQ#Where_do_I_download_firmware.3F|Firmware FAQ]] an...
    20: ...ller to speed up the process, otherwise once you upload the '''CFE_Updater-WRT54G-TM.bin''' you will n...
    36: ...able to tell when the router is ready for a TFTP upload.
    40: ...go to the Administration Tab - Firmware Upgrade. Upload the '''CFE_Updater-WRT54G-TM.bin''' to the rou...
    42: ... the Upgrade button to allow the CFE_Updater to replace the stock CFE on the router and for it to eras...
  6. Netgear WNDR4500 (3,670 bytes)
    69: Read the [[Firmware_FAQ#Where_do_I_download_firmware.3F|Firmware FAQ]] an...
    92: ...) of desired build. See forum build threads and [[Firmware_FAQ#Where_do_I_download_firmware.3F|the DD-WRT FAQ]] ...
  7. D-Link DIR-615 rev C (10,866 bytes)
    6: ... (it will say "H/W Ver: C1 F/W Ver 3.01" for example on the bottom of the box, underneath the barcode...
    47: # Download the latest firmware from: [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    50: ## Someone uploaded an [http://www.dd-wrt.com/phpBB2/viewtopic.p...
    55: ...n]-factory-to-ddwrt-firmware.bin" file -> click "Upload" button.
    57: ## If it tells you that you've uploaded firmware for the wrong hardware, you may nee...
  8. Supported Devices (242,466 bytes)
    12: PLEASE, use the following links on the "beta" FTP/HT...
    14: ...D-WRT" in quotes with the word AND (in uppercase) plus your hardware or issue to perform your search.
    21: ...ation-to-be-removed-in-firefox-90/ Built-in FTP implementation to be removed in Firefox 90]<br>
    36: ...ould I buy?|this]].''' Download links and more: [[Firmware_FAQ#Where_do_I_download_firmware.3F|FAQ:Firmware Down...
    54: ...nit'''. Use NO other builds. '''All non-Broadcom platforms require at least 4MB flash!'''<br>
  9. Wlan Repeater (9,003 bytes)
    14: ... solution in the same subnet you are in the wrong place. You need to read [[Linking Routers]] first..!
    21: ...E THE ROUTER DATABASE, IT IS NOT UPDATED. SEE: [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download ...
    58: #**<u>Example:</u> if host AP is 192.168.1.x, assign repeater ...
    65: ...ure that your settings are correct. Then click APPLY to write changes.
    77: ...to check "Enable," and then click "Save'' then "Apply". Then check the main WLAN router at its public...
  10. 安装 (16,952 bytes)
    13: ...rrect "killer" and dd-wrt firmware versions (as applicable) for your device as needed. However, you m...
    19: ...st things you can do. Fortunately, dd-wrt has simplified this immensely with their search format. On...
    44: ...r from a Bad Flash|从失败的刷新恢复]]、[[Firmware_FAQ/zh_cn|FAQ]] 页面保存至硬盘(使用 文件->...
    61: # 点击 "应用"(Apply) 按钮。
    92: ...刷新失败'''。而当前版本的 Internet Explorer 浏览器没有问题。另外,如果您的...
  11. Linksys E2100L (2,608 bytes)
    59: '''Please see "[[Firmware_FAQ#Which_router_should_I_buy.3F|Where Do I Download ...
    66: #Wait until the router has completely finished flashing and rebooting (~5-10 minut...
  12. Linksys E800 (3,220 bytes)
    41: *See: [[Firmware_FAQ##Which_router_should_I_buy.3F|Where do I download...
    52: # Power cycle by unplugging the E800 for 10 seconds.
    53: # Plug the E800 back in and wait about 2 minutes until...
    65: #Apply Settings
  13. 简体中文 (1,977 bytes)
    1: {{Template:Welcome}}
    11: |'''[[Firmware_FAQ/zh_cn|FAQ]]''' <br/> 常见问题解答
  14. Buffalo (19,760 bytes)
    2: ...o identify your router model correctly, and see [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    15: # Plug your Ethernet cable (not wireless!) into a LAN ...
    19: # Unplug the router. Get ready to start the TFTP upload.
    20: ...hen the diag light blinks, immediately start the upload.
    26: * Though many companies let you upload firmware directly from your web browser, Buffa...
  15. Linksys E900 (3,213 bytes)
    41: *See: [[Firmware_FAQ##Which_router_should_I_buy.3F|Where do I download...
    52: # Power cycle by unplugging the E900 for 10 seconds.
    53: # Plug the E900 back in and wait about 2 minutes until...
    65: #Apply Settings
  16. Linksys WRT1900AC (7,260 bytes)
    4: ...ilar that these instructions will probably also apply to the other versions, but it's not guaranteed.
    8: #See [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
    43: * If you do not plan to use the 5GHz wifi band, turn it off by addin...
    48: ...tion-part-3-channel-dilemma/438580919 DFS page] explains. Basically, the only usable ones are channels...
    50: ... also increase noise. The DFS page linked above explains channel width well. You'll have to see how ma...
  17. Netgear R7000P (2,672 bytes)
    61: [[Firmware_FAQ#Where_do_I_download_firmware.3F|Where do I downlo...
  18. Linksys WRT600N (4,396 bytes)
    46: ...com'' folder non-micro build under 7872 KB (see [[Firmware_FAQ#Where_do_I_download_firmware.3F|''Where do I down...
    56: Simply reset and flash the stock image via TFTP or thro...
    66: Plug the router in and nearly simultaneously hit the...
    67: ...omplete before hard reboot (physically unplug & replug). The router might not do anything so be patien...
  19. Hard reset or 30/30/30 (5,274 bytes)
    9: ...!<br>Wait a couple of minutes after upgrade is complete and the router has rebooted itself.</font>
    42: * Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    43: ...L holding the reset button a final 30 seconds<br>(please note that this step can put Asus devices into...
    81: ... This should not be used on some devices. For example, on the Asus WL-500g and Motorola WR850G, the bo...
    84: ...l prompt to set a User and Password (except for [[Firmware_FAQ#How_do_I_access_the_router.27s_settings.3F|very o...
  20. X86 (10,723 bytes)
    3: ...sting very small low power industrial embedded PC plattforms e.g. the very popular [[PC-Engines|PC-Eng...
    5: == Applications ==
    7: ...at least, escape many of the limitations of small platforms.
    57: For example, we'll use: <br>
    75: * The adequade *.image from below fitting your plattform and needs

View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for