User talk:Oxo
From DD-WRT Wiki
Contents |
Setup
- dd-wrt v23 sp2
- WDS
- 2 Asus Premium
- USB HD
- USB Printer
- Serial ports
- 1 Lynksys v5 - for sale, preferably swap for Asus Premium :)
- JTAG cable
Between garden shed home and my oldest sons flat
Basic alterations
Asus 32MByte
mem ok with 32Mbyte (without the following, less memory)
nvram set sdram_init=0x0009 nvram set sdram_ncdl=0 nvram commit reboot
JFFS
Needed for ipkg and others (rw filesystem)
nvram set sys_enable_jffs2=1 nvram set sys_clean_jffs2=1 nvram set jffs_mounted=1 nvram commit reboot
/jffs/etc/config/*.startup
v23 starts executable files in /jffs/etc/config/*.startup
/jffs/etc/config/S10modules.startup
ipkg sometimes make modules.d files
#!/bin/sh for module in $(cat /jffs/etc/modules.d/*);do /sbin/insmod /jffs/lib/modules/2.4.30/$module.o done
/jffs/etc/config/S90init.startup
ipkg sometimes make init.d files
#!/usr/bin/sh $(/jffs/etc/init.d/S* start)
USB
USB Core
Install the folowing modules for USB
# ipkg install kmod-usb-uhci // this is for USB 1.1 ipkg install kmod-usb-core ipkg install kmod-usb2
USB HD
Install the folowing modules for filesystems:
ipkg install kmod-usb-storage ipkg install kmod-vfat ipkg install kmod-ext2 ipkg install kmod-ext3
Mounting
Unfortunatly, dd-wrt doesn't seem to look for a /jffs/etc/fstab ( fstab referenceh )
/jffs/etc/config/S30mount.startup
#!/bin/sh { read MOUNT_DEVICE MOUNT_POINT FS DUMP FSK i=0 while [ $i -le 15 ];do if [ -e $MOUNT_DEVICE ];then mount $MOUNT_DEVICE $MOUNT_POINT break fi sleep 1 i=$(expr $i + 1) done }</jffs/etc/fstab
USB Diverse
In order to use a multislot card reader, you must add the following parameter to the scsi_mod in the file /jffs/etc/modules.d/60-usb-storage:
scsi_mod max_scsi_luns=8
(I don't know what this means but I put it in: I haven't tested it
USB Printer
Suk! - no /dev/usb/lp0 in the standard dd-wrt.
One need's to mknode and it is not included..
Otherwise, if the /dev/usb/lp0 could be made (recompile or ..) the How-to for OpenWrt and printer would work
Download Master Functionality
Not yet started.
Serial/UART
MAXIM MAX3232=
Sejs, Denmark
My friendly local electronics supplier in Sejs, Denmark
Asus
How does one upload gif/jpegs for display ....!!!???!!! And/or make embedded image ... - I have to link to forum which may give brocken links :( [[Image:http://www.dd-wrt.com/phpBB2/files/asus_ttl_111.jpg]]
Future ..
Bluetooth
"Cool": someone has hooked bluetooth to Asus...
- Nice with PBX sw and a bluetooth headset (how to ring out ...hmm)
- Internet access for Mobil...
- GPS
Playtime
Optware
OpenWRT
Hmm, dd-wrt is so easy...
But I need /dev/usb/lpt0 so I'll try and make one with the source. Suk!- have to get a Linux running (probably Ubuntu on VMWare)
A funny thing happened after I dd-wrt'ed my boxes
You have probably NOT bricked your router if you continually loose wireless to it while going thru the panels.
Every time I left a dd-wrt www interface panel, with ping router and using wireless, I "lost" contact with the router. Repair wireless solved the problem until I moved between panels again.
This has happened on both the routers.
Be patient.
Enable 32MByte memory.
The problem will go away.
(Needs more analysing)
Brick
After first dd-wrt attempt: none since Had to short pins in the end
A typical brick discussion with "what to do"
I believe I had bricked my router and was pressing resets etc, whereas I should have been patient and checked with a wired connection first and not just wireless.
ASUS dmesg
DD-WRT v23 SP2 std (c) 2006 NewMedia-NET GmbH Release: 09/13/06 (SVN revision: 3927:3929) DD-WRT-asus login: root Password: ========================================================== ____ ___ __ ______ _____ ____ _____ | _ \| _ \ \ \ / / _ \_ _| __ _|___ \|___ / || | || ||____\ \ /\ / /| |_) || | \ \ / / __) | |_ \ ||_| ||_||_____\ V V / | _ < | | \ V / / __/ ___) | |___/|___/ \_/\_/ |_| \_\|_| \_/ |_____|____/ DD-WRT v23 SP2 http://www.dd-wrt.com ========================================================== DD-WRT VeryBusyBox v1.2.1 (2006.09.13-18:23+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # dmesg <0>CPU revision is: 00029006 <0>Linux version 2.4.34-pre2 (root@linux) (gcc version 3.4.6 (OpenWrt-2.0)) #160 Wed Sep 13 20:27:16 CEST 2006 <0>Setting the PFC value as 0x15 <0>Determined physical RAM map: <0> memory: 02000000 @ 00000000 (usable) <0>On node 0 totalpages: 8192 <0>zone(0): 8192 pages. <0>zone(1): 0 pages. <0>zone(2): 0 pages. <0>Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 <0>CPU: BCM4704 rev 9 at 264 MHz <0>Using 132.000 MHz high precision timer. <0>Calibrating delay loop... 263.78 BogoMIPS <6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) <6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) <0>Page-cache hash table entries: 8192 (order: 3, 32768 bytes) <0>Checking for 'wait' instruction... unavailable. <0>POSIX conformance testing by UNIFIX <0>PCI: Fixing up bus 0 <0>PCI: Fixing up bridge <7>PCI: Setting latency timer of device 01:00.0 to 64 <0>PCI: Fixing up bus 1 <0>Initializing RT netlink socket <0>Starting kswapd <6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) <6>devfs: boot_options: 0x1 <6>squashfs: version 3.0 (2006/03/15) Phillip Lougher <0>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0xb8000300 (irq = 3) is a 16550A <6>ttyS01 at 0xb8000400 (irq = 3) is a 16550A <6>Software Watchdog Timer: 0.05, timer margin: 60 sec <7>PCI: Setting latency timer of device 00:01.0 to 64 <7>PCI: Setting latency timer of device 00:02.0 to 64 <6>imq driver loaded. <6>Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky <7>Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 <7>Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 <7>Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 <5> Amd/Fujitsu Extended Query Table v1.3 at 0x0040 <5>number of CFI chips: 1 <5>cfi_cmdset_0002: Disabling fast programming due to code brokenness. <5>Flash device: 0x800000 at 0x1c000000 <5>Physically mapped flash: squashfs filesystem found at block 823 <5>Creating 5 MTD partitions on "Physically mapped flash": <5>0x00000000-0x00040000 : "pmon" <5>0x00040000-0x007f0000 : "linux" <5>0x000cde58-0x003967d5 : "rootfs" <0>mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only <5>0x007f0000-0x00800000 : "nvram" <5>0x003a0000-0x007f0000 : "ddwrt" <6>Initializing Cryptographic API <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 512 buckets, 4Kbytes <6>TCP: Hash tables configured (established 2048 bind 4096) <0>ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack <0>ip_tables: (C) 2000-2002 Netfilter core team <6>IPP2P v0.8.1_rc1 loading <0>ipt_random match loaded <0>netfilter PSD loaded - (c) astaro AG <6>ipt_osf: Startng OS fingerprint matching module. <0>ipt_IPV4OPTSSTRIP loaded <0>ip_conntrack_rtsp v0.01 loading <0>ip_nat_rtsp v0.01 loading <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> <6>All bugs added by David S. Miller <davem@redhat.com> <0>VFS: Mounted root (squashfs filesystem) readonly. <6>Mounted devfs on /dev <6>diag boardtype: 0000042f <7>PCI: Setting latency timer of device 01:02.0 to 64 <0>PCI: Enabling device 01:02.0 (0004 -> 0006) <0>eth2: Broadcom BCM4318 802.11 Wireless Controller 3.90.39.0 <5>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. <7>vlan0: add 01:00:5e:00:00:01 mcast address to master interface <6>vlan0: dev_set_promiscuity(master, 1) <6>device eth0 entered promiscuous mode <6>device vlan0 entered promiscuous mode <6>device eth2 entered promiscuous mode <6>device wds0.49153 entered promiscuous mode <6>device wds0.49154 entered promiscuous mode <0>vlan1: Setting MAC address to 00 13 06 62 00 00. <7>vlan1: add 01:00:5e:00:00:01 mcast address to master interface <6>Journalled Block Device driver loaded <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>usb.c: registered new driver usblp <6>printer.c: v0.13: USB Printer Device Class driver <6>SCSI subsystem driver Revision: 1.00 <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <6>uhci.c: USB Universal Host Controller Interface driver v1.1 <0>PCI: Enabling device 01:03.0 (0000 -> 0001) <6>uhci.c: USB UHCI at I/O 0x100, IRQ 2 <6>usb.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <0>PCI: Enabling device 01:03.1 (0000 -> 0001) <6>uhci.c: USB UHCI at I/O 0x120, IRQ 2 <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <0>PCI: Enabling device 01:03.2 (0000 -> 0002) <6>ehci_hcd 01:03.2: PCI device 1106:3104 <6>ehci_hcd 01:03.2: irq 2, pci mem c0141000 <6>usb.c: new USB bus registered, assigned bus number 3 <6>ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 <6>hub.c: USB hub found <6>hub.c: 4 ports detected <3>hub.c: connect-debounce failed, port 1 disabled <6>hub.c: new USB device 01:03.2-1, assigned address 2 <6>scsi0 : SCSI emulation for USB Mass Storage devices <0> Vendor: IC25N030 Model: ATDA04-0 Rev: DA4O <0> Type: Direct-Access ANSI SCSI revision: 02 <0>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <0>SCSI device sda: 58605121 512-byte hdwr sectors (30006 MB) <6>Partition check: <6> /dev/scsi/host0/bus0/target0/lun0: p1 <7>WARNING: USB Mass Storage data integrity not assured <7>USB Mass Storage device found at 2 <6>hub.c: new USB device 01:03.0-2, assigned address 2 <6>printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004