Talk:Separate LAN and WLAN

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 07:03, 14 February 2020 (edit)
Tag (Talk | contribs)
(iptables vs. ebtables?)
← Previous diff
Revision as of 07:06, 14 February 2020 (edit) (undo)
Tag (Talk | contribs)
(iptables vs. ebtables? - Add signature)
Next diff →
Line 44: Line 44:
ebtables -t filter -I OUTPUT 4 -p IPv4 -o eth1 --ip-src 192.168.0.0/16 -j DROP ebtables -t filter -I OUTPUT 4 -p IPv4 -o eth1 --ip-src 192.168.0.0/16 -j DROP
ebtables -t filter -I OUTPUT 5 -p IPv4 -o eth2 --ip-src 192.168.0.0/16 -j DROP ebtables -t filter -I OUTPUT 5 -p IPv4 -o eth2 --ip-src 192.168.0.0/16 -j DROP
 +
 +--[[User:Tag|Tag]] 08:06, 14 February 2020 (CET)

Revision as of 07:06, 14 February 2020

Improvements that are not yet included on this page:
1. DHCP issue resolved
2. WPA/WPA2 didn't work with the steps I posted originally - Works with the updated instructions.
3. Firewall rules tightened up a bit. (The router is arguably "more secure" from the Wireless clients than with my last set of instructions)


No update yet

Almost a yearand still no update of the page... Towsonu2003 23:21, 7 Sep 2006 (CEST)

obviosly dead, need some input on this --whiteboy 05:26, 14 Dec 2006 (CET)

dnsmasq errors out with Can't bind 192.168.1.1 socket already in use

iptables vs. ebtables?

Is there any reason that isolation of (bridged) wireless interfaces can't be achieved with ebtables? As far as I can tell, I have been able to isolate both wireless interfaces with the following startup script:

insmod ebtables
insmod ebtable_filter
insmod ebtable_broute
insmod ebt_ip

#DHCP
ebtables -t filter -I INPUT 1 -p IPv4 --ip-proto udp --ip-dport 67 -j ACCEPT
#DNS
ebtables -t filter -I INPUT 2 -p IPv4 --ip-proto udp --ip-dport 53 -j ACCEPT
ebtables -t filter -I INPUT 3 -p IPv4 --ip-proto tcp --ip-dport 53 -j ACCEPT
#PROTECT ROUTER
ebtables -t filter -I INPUT 4 -p IPv4 -i eth1 --ip-dst 192.168.0.0/16 -j DROP
ebtables -t filter -I INPUT 5 -p IPv4 -i eth2 --ip-dst 192.168.0.0/16 -j DROP

#ISOLATE
ebtables -t filter -I FORWARD 1 -i eth1 -j DROP
ebtables -t filter -I FORWARD 2 -i eth2 -j DROP
ebtables -t filter -I FORWARD 3 -o eth1 -j DROP
ebtables -t filter -I FORWARD 4 -o eth2 -j DROP

#DHCP
ebtables -t filter -I OUTPUT 1 -p IPv4 --ip-proto udp --ip-sport 67 -j ACCEPT
#DNS
ebtables -t filter -I OUTPUT 2 -p IPv4 --ip-proto udp --ip-sport 53 -j ACCEPT
ebtables -t filter -I OUTPUT 3 -p IPv4 --ip-proto tcp --ip-sport 53 -j ACCEPT
#PROTECT ROUTER
ebtables -t filter -I OUTPUT 4 -p IPv4 -o eth1 --ip-src 192.168.0.0/16 -j DROP
ebtables -t filter -I OUTPUT 5 -p IPv4 -o eth2 --ip-src 192.168.0.0/16 -j DROP

--Tag 08:06, 14 February 2020 (CET)