Talk:Separate LAN and WLAN

From DD-WRT Wiki

Jump to: navigation, search

Improvements that are not yet included on this page:
1. DHCP issue resolved
2. WPA/WPA2 didn't work with the steps I posted originally - Works with the updated instructions.
3. Firewall rules tightened up a bit. (The router is arguably "more secure" from the Wireless clients than with my last set of instructions)


[edit] No update yet

Almost a yearand still no update of the page... Towsonu2003 23:21, 7 Sep 2006 (CEST)

obviosly dead, need some input on this --whiteboy 05:26, 14 Dec 2006 (CET)

[edit] dnsmasq errors out with Can't bind 192.168.1.1 socket already in use

[edit] iptables vs. ebtables?

Is there any reason that isolation of (bridged) wireless interfaces can't be achieved with ebtables? As far as I can tell, I have been able to isolate both wireless interfaces with the following startup script: 

insmod ebtables
insmod ebtable_filter
insmod ebtable_broute
insmod ebt_ip

#DHCP
ebtables -t filter -I INPUT 1 -p IPv4 --ip-proto udp --ip-dport 67 -j ACCEPT
#DNS
ebtables -t filter -I INPUT 2 -p IPv4 --ip-proto udp --ip-dport 53 -j ACCEPT
ebtables -t filter -I INPUT 3 -p IPv4 --ip-proto tcp --ip-dport 53 -j ACCEPT
#PROTECT ROUTER
ebtables -t filter -I INPUT 4 -p IPv4 -i eth1 --ip-dst 192.168.0.0/16 -j DROP
ebtables -t filter -I INPUT 5 -p IPv4 -i eth2 --ip-dst 192.168.0.0/16 -j DROP

#ISOLATE
ebtables -t filter -I FORWARD 1 -i eth1 -j DROP
ebtables -t filter -I FORWARD 2 -i eth2 -j DROP
ebtables -t filter -I FORWARD 3 -o eth1 -j DROP
ebtables -t filter -I FORWARD 4 -o eth2 -j DROP

#DHCP
ebtables -t filter -I OUTPUT 1 -p IPv4 --ip-proto udp --ip-sport 67 -j ACCEPT
#DNS
ebtables -t filter -I OUTPUT 2 -p IPv4 --ip-proto udp --ip-sport 53 -j ACCEPT
ebtables -t filter -I OUTPUT 3 -p IPv4 --ip-proto tcp --ip-sport 53 -j ACCEPT
#PROTECT ROUTER
ebtables -t filter -I OUTPUT 4 -p IPv4 -o eth1 --ip-src 192.168.0.0/16 -j DROP
ebtables -t filter -I OUTPUT 5 -p IPv4 -o eth2 --ip-src 192.168.0.0/16 -j DROP

--Tag 08:06, 14 February 2020 (CET)

Or, after removing from br0, why is it necessary to attach to a new bridge? Leaving the wireless interfaces unbridged leads to a nice, succinct startup script: 
iptables -I FORWARD 1 -i eth1 -o ! vlan2 -j DROP
iptables -I FORWARD 2 -i eth2 -o ! vlan2 -j DROP
--Tag 21:54, 14 February 2020 (CET)
Retrieved from "http://wiki.dd-wrt.com/wiki/index.php/Talk:Separate_LAN_and_WLAN"