PPTP Server Configuration

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:16, 27 December 2005 (edit)
200.126.238.154 (Talk)

← Previous diff
Revision as of 23:40, 27 December 2005 (edit) (undo)
200.126.238.154 (Talk)

Next diff →
Line 1: Line 1:
-Guia para configurar PPTP Server en WRT54G/GS con DD-WRT V2.3+This is a configuration guide to get a "PPTP Server" working on WRT54G/GS DD-WRT V2.3
-Resumen de funcionalidad : Muchas empresas y usuarios finales a veces necesitamos conectarnos a la "RED" de nuestra oficina o casa para acceder a informacion valiosa que se encuentra alli. A veces, las empresas para las cuales trabajamos, nos proveen de una coneccion VPN para que podamos trabajar desde nuestro hogar en forma segura. Les voy a explicar como configurar su WRT54G/GS para que funcione como servidor PPTP (VPN)+A Little brief : A PPTP Server let's us get connected securely from our home to the Office LAN, so you can use the services from your office in the confort of your home.
-Lo primero que hay que hacer es cargar el firmware adecuado en tu linksys. Prestale especial cuidado a la version, recomiendo la version DD-WRT 2.3 "VOIP" que es la que mejor me ha funcionado+I'm using version DD-WRT 2.3 "VOIP" on WRT54GS router
-1) Una vez que tienes el Firmware instalado y esta funcionando correctamente ingresas mediante la interface grafica (http://ip_de_tu_router) y te dirijes a la pestaña que se llama "ADMINISTRATION" una vez alli, haces click sobre otra pestaña que se llama "SERVICES"+1) The first step in the configuration is to have flashed our WRT54G/GS with the "right" fimware, once you be sure of firmware , you have to go to the WEB Adminitration Page (http://ip_of_router), log on and go to the "ADMINISTRATION" tab, once you get there, do a click on "SERVICES" tab.
-2) Si te deslizas hacia abajo por la pagina en la que estas veras la opcion "PPTP Server" por default esta "Disabled" que significa "deshabilitado" tu debes ponerlo en "Enabled" que significa " Habilitado" , luego debes ir al final de la pagina y hacer click en "Save Settings" que significa "guardar los cambios".+2) Go down and you will see "PPTP Server" by default is "Disabled" you must "ENABLE" and go to the botton of the page and click on "Save Settings"
-3) Aparecera una pagina que dice: "Settings Are Succesfull" y un boton que dice "Continue" haz click sobre ese boton.+3) The next you will see, is the message "Settings Are Succesfull" click on "Continue".
-4) Nuevamente aparecemos en la pagina "Services" pero si ahora nos deslizamos hacia abajo, veremos que tenemos algunas cosas para completar en las opciones de PPTP Server...+4) Again in the tab "Services" , go down , and you will see a few options under PPTP Server...
 +you have to complete the options in order to get PPTP server working
 +Complete the options as follows :
-PPTP Server = Enabled (esto es lo que hace funcionar el servicio)+PPTP Server = Enabled (this runs the service)
-Server IP = aqui debes escribir la direccion IP que tienes en tu puerto WAN es decir el que te conecta a internet+Server IP = here you have to write your WAN IP Address. Usually provided by yur ISP.
-Client IP(s)= Aqui deberas escribir el Rango de direccines que quieres asignar a los clientes que se conectan desde el exterior (Internet) a tu servidor pptp por ejemplo 192.168.1.100-120 (en este ejemplo estas habilitando 20 clientes )+Client IP(s)= here you have to write the "clients" ip addresses range, this is used to give to the clients, who are trying to connect, a valid ip address on the LAN segment of the network
 + Example: 192.168.1.100-120 (20 clients allowed)
-CHAP-Secrets = Aqui deberas escribir los "Usernames y las Passwords" que les quieres asignar a tus usuarios de VPN. Cuando un usuario desea armar un tunel entre su aquina y el WRT54G/GS debera validarse para establecer una coneccion exitosa, escribiendo aqui el username y las password que tu quieras, le estas confiriendo seguridad a el tunel VPN. El formato es asi :+CHAP-Secrets = Here you have to write the "Usernames" and "Passwords" that you want to assign to the clients.
 +Please give attetion que les quieres asignar a tus usuarios de VPN. Cuando un usuario desea armar un tunel entre su aquina y el WRT54G/GS debera validarse para establecer una coneccion exitosa, escribiendo aqui el username y las password que tu quieras, le estas confiriendo seguridad a el tunel VPN. El formato es asi :
Username * Password * Username * Password *

Revision as of 23:40, 27 December 2005

This is a configuration guide to get a "PPTP Server" working on WRT54G/GS DD-WRT V2.3

A Little brief : A PPTP Server let's us get connected securely from our home to the Office LAN, so you can use the services from your office in the confort of your home.

I'm using version DD-WRT 2.3 "VOIP" on WRT54GS router

1) The first step in the configuration is to have flashed our WRT54G/GS with the "right" fimware, once you be sure of firmware , you have to go to the WEB Adminitration Page (http://ip_of_router), log on and go to the "ADMINISTRATION" tab, once you get there, do a click on "SERVICES" tab.

2) Go down and you will see "PPTP Server" by default is "Disabled" you must "ENABLE" and go to the botton of the page and click on "Save Settings"

3) The next you will see, is the message "Settings Are Succesfull" click on "Continue".

4) Again in the tab "Services" , go down , and you will see a few options under PPTP Server... you have to complete the options in order to get PPTP server working Complete the options as follows :

PPTP Server = Enabled (this runs the service)

Server IP = here you have to write your WAN IP Address. Usually provided by yur ISP.

Client IP(s)= here you have to write the "clients" ip addresses range, this is used to give to the clients, who are trying to connect, a valid ip address on the LAN segment of the network

 Example: 192.168.1.100-120 (20 clients allowed)

CHAP-Secrets = Here you have to write the "Usernames" and "Passwords" that you want to assign to the clients. Please give attetion que les quieres asignar a tus usuarios de VPN. Cuando un usuario desea armar un tunel entre su aquina y el WRT54G/GS debera validarse para establecer una coneccion exitosa, escribiendo aqui el username y las password que tu quieras, le estas confiriendo seguridad a el tunel VPN. El formato es asi :

Username * Password *

Nombre de usuario (espacio en blanco) (asterisco) Contraseña (espacio en blanco) (asterisco) Ejemplo :

juan * Gomez * Estela * perez * Pepito * suarez *

No te olvides de dejar los espacios, es muy importante , sino no funcionara adecuadamente.

Una vez que has completado los datos , vas hacia abajo de la pagina y hace click en "Save Settings" para que se guarden lso cambios, cuando aparece la pagina "Settings Are Succesfull" Haces click en el boton "Continue" para acceder una vez mas a la pagina "SERVICES" donde te fijaras si la informacion esta correcta una ulyima vez.

5) Finalmente , te deslizas una vez mas hacia abajo y haces click sobre el boton "REBOOT ROUTER" Este paso es importante , por que es el que efctivamente encendera el servicio con los criterios que tu has configurado una vez que el router reinicie.

6) Ahora lo que deberias hacer para probar si esta todo en orden , seria desde una maquina que este en internet con un windows 2000/XP crear una nueva coneccion de red, de tipo VPN configurar la IP del servidor VPN (que es la IP WAN de tu linksys) El usuaro y la password que has escrito en el linksys y hacer click en conectar. Si has seguido los pasos correctamente , te estaras conectando por VPN sin ningun problema.

Si tienes alguna duda, contactame m_semino@hotmail.com

AVISO IMPORTANTE : No tengo ninguna relacion con DD-WRT , me encanta su trabajo , pero por el momento soy solo un usuario mas como vos, que esta tratando de sacarle mayor provecho a la cucaracha azul que tenemos, Saludos para todos.