Linksys E2100L

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 08:33, 24 August 2010 (edit)
LOM (Talk | contribs)

← Previous diff
Current revision (21:37, 31 March 2023) (edit) (undo)
Kernel-panic69 (Talk | contribs)
(Flashing instructions - (fixed initial flash file link, added upgrading instructions, etc.))
 
(8 intermediate revisions not shown.)
Line 1: Line 1:
-This page reserved for Linksys E2100 only+===Hardware Information===
-Currently this page is a work in progress...+[[Image:e2100l1.jpg]] [[Image:e2100l2.jpg]]
 +
 +{| border="1" cellspacing="0"
 +! CPU
 +| Atheros 9130
 +|-
 +! CPU Speed
 +| 400 MHz
 +|-
 +! Flash ROM
 +| 8 MB
 +|-
 +! RAM
 +| 64 MB
 +|-
 +! Radio
 +| 1x 2.4 GHz
 +|-
 +! WLAN Support
 +| B/G/N
 +|-
 +! WLAN Max Speed
 +| 300 mbps
 +|-
 +! Antenna Location
 +| 2x external (RPSMA)
 +|-
 +! Switch
 +| 4x 10/100 + 1 WAN
 +|-
 +! USB
 +| 1x USB 2.0
 +|-
 +|}
 +
 +==Flashing instructions==
 +
 +You will first need to download this file for initial flash from stock firmware:
 +
 +https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2013/02-11-2013-r20675/linksys_E2100L/e2100l-firmware.bin
 +
 +#Go into the Linksys stock firmware and choose to reset to defaults.
 +#Once that is finished, set a static IP on your machine to 192.168.1.6 with subnet 255.255.255.0 and gateway 192.168.1.1
 +#Log back into the Linksys firmware and find where to update the firmware.
 +#Select the file linked above and then begin the flash procedure, this usually takes 6-7 minutes for it to finish properly, so be patient!
 +#Once it is finished, close your browser, then reopen and browse to http://192.168.1.1 it should want you to set a user/password, do so.
 +#When you are in DD-WRT's webUI, go to Administration > Factory Defaults
 +#Select to "Restore Factory Defaults" This will effectively hard reset the router and ensure integrity of the flash.
 +#Return your machine to auto-DHCP.
 +#Log back into the webUI @ http://192.168.1.1 and set a user/pass and enjoy DD-WRT!
 +
 +
 +
 +==Upgrading DD-WRT==
 +
 +'''Please see "[[Firmware_FAQ#Which_router_should_I_buy.3F|Where Do I Download Firmware?]]" for more information.'''
 +
 +#Go to the linksys_E2100L subfolder of the desired release folder and download e2100l-firmware.bin
 +#Open browser and navigate to http://192.168.1.1 (or whichever IP address you assigned to your router).
 +#Go to ''Administration -> Firmware Upgrade'' tab.
 +#Browse to and elect downloaded e2100l-firmware.bin file.
 +#Click on "Upgrade" (do not select reset to defaults after flashing).
 +#Wait until the router has completely finished flashing and rebooting (~5-10 minutes).
 +#Depending on whether or not it shows the page to click on "Continue", do so to proceed (or not).
 +#You should still be able to navigate anywhere within the webUI afterwards.
 +
 +==Reverting back to stock==
 +
 +Should you want to revert back to stock firmware then you should be able to download the stock firmware from Linksys's site and flash back using the webgui.
 +
 +==Useful Web Links==
 +
 +Here is the link for the forum support topic regarding E2100L.
 +
 +http://www.dd-wrt.com/phpBB2/viewtopic.php?t=73986&postdays=0&postorder=asc&start=0
[[Category:Linksys]] [[Category:Linksys]]

Current revision

Contents

[edit] Hardware Information

Image:e2100l1.jpg Image:e2100l2.jpg


CPU Atheros 9130
CPU Speed 400 MHz
Flash ROM 8 MB
RAM 64 MB
Radio 1x 2.4 GHz
WLAN Support B/G/N
WLAN Max Speed 300 mbps
Antenna Location 2x external (RPSMA)
Switch 4x 10/100 + 1 WAN
USB 1x USB 2.0

[edit] Flashing instructions

You will first need to download this file for initial flash from stock firmware:

https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2013/02-11-2013-r20675/linksys_E2100L/e2100l-firmware.bin

  1. Go into the Linksys stock firmware and choose to reset to defaults.
  2. Once that is finished, set a static IP on your machine to 192.168.1.6 with subnet 255.255.255.0 and gateway 192.168.1.1
  3. Log back into the Linksys firmware and find where to update the firmware.
  4. Select the file linked above and then begin the flash procedure, this usually takes 6-7 minutes for it to finish properly, so be patient!
  5. Once it is finished, close your browser, then reopen and browse to http://192.168.1.1 it should want you to set a user/password, do so.
  6. When you are in DD-WRT's webUI, go to Administration > Factory Defaults
  7. Select to "Restore Factory Defaults" This will effectively hard reset the router and ensure integrity of the flash.
  8. Return your machine to auto-DHCP.
  9. Log back into the webUI @ http://192.168.1.1 and set a user/pass and enjoy DD-WRT!


[edit] Upgrading DD-WRT

Please see "Where Do I Download Firmware?" for more information.

  1. Go to the linksys_E2100L subfolder of the desired release folder and download e2100l-firmware.bin
  2. Open browser and navigate to http://192.168.1.1 (or whichever IP address you assigned to your router).
  3. Go to Administration -> Firmware Upgrade tab.
  4. Browse to and elect downloaded e2100l-firmware.bin file.
  5. Click on "Upgrade" (do not select reset to defaults after flashing).
  6. Wait until the router has completely finished flashing and rebooting (~5-10 minutes).
  7. Depending on whether or not it shows the page to click on "Continue", do so to proceed (or not).
  8. You should still be able to navigate anywhere within the webUI afterwards.

[edit] Reverting back to stock

Should you want to revert back to stock firmware then you should be able to download the stock firmware from Linksys's site and flash back using the webgui.

[edit] Useful Web Links

Here is the link for the forum support topic regarding E2100L.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=73986&postdays=0&postorder=asc&start=0