LaFonera Software Heartbeat
From DD-WRT Wiki
This is the way to simulate the fon heartbeat, so that the fonera with dd-wrt is shown as active on the fon maps.
It is based on the work of freddy (http://fon.freddy.eu.org), futejia (http://futejia.blogspot.com) and krikkit (http://www.krikkit.net)
There are two ways you can enable your activity on the fon maps.
The easy way by wildblue (This guide is also available on http://www.wildblue.de/fonera/heartbeat/howto) :
- Open your web-based configuration on your DD-WRT-Fonera (e.g. 192.168.1.1)
- Go to the "Administration" section, then to "Commands" (German: "Diagnose")
- paste the follwing commands and select "Save Startup" (German: "Startup speichern")
#!/bin/sh sleep 60 mkdir /tmp/simthefon cd /tmp/simthefon /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/key /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/simthefon /usr/bin/wget http://www.wildblue.de/fonera/heartbeat/known_hosts cat /tmp/simthefon/known_hosts >> /tmp/root/.ssh/known_hosts chmod a+x /tmp/simthefon/simthefon ( /tmp/simthefon/simthefon >/tmp/simthefon/simthefon.log & ) &
4. Now you can reboot your router or simply past the commands again and select "Run Commands" (German: "Kommandos ausführen")
Thats` is. Your Router is now active on maps.fon.com
Second, more difficult way by Krikkit (I don't now why he made it that difficult, even if he changed the original script):
1. download my script from http://www.krikkit.net/download/simthefon/simthefon.sh (thanks to futejia http://futejia.blogspot.com/ for his script)
2. download the fon key (you can get the fon key from here: http://fon.freddy.eu.org/fonera/fon-0.7.0-rev4/etc/dropbear/key )
3. download known_hosts file ( http://fon.freddy.eu.org/fonera/fon-0.7.0-rev4/etc/dropbear/known_hosts )
4. save the script and the fon key and fon known_hosts on your local ftp server or any location where you can download it with wget afterwards...
5. find out your MAC-addresses and change them in the file simthefon.sh
WLMAC ifconfig ath0|grep HWaddr|sed -e "s/^.*HWaddr //" |sed -e "s/ //g" MAC ifconfig eth0|grep HWaddr|sed -e "s/^.*HWaddr //" |sed -e "s/ //g"
6. paste the text below into Administration --> Commands --> Commands input field and click "Save startup"
startup script:
#!/bin/sh sleep 60 mkdir /tmp/simthefon cd /tmp/simthefon /usr/bin/wget ftp://192.168.1.2/simthefon/key /usr/bin/wget ftp://192.168.1.2/simthefon/simthefon.sh /usr/bin/wget ftp://192.168.1.2/simthefon/known_hosts cat /tmp/simthefon/known_hosts >> /tmp/root/.ssh/known_hosts chmod a+x /tmp/simthefon/simthefon.sh ( /tmp/simthefon/simthefon.sh >/tmp/simthefon/simthefon.log & ) &
do not forget to edit the wget commands, to fit your locations...
reboot your fonera...
your hotspot should now be ACTIVE on http://maps.fon.com
- Here is a Link to another Forum where the heartbeat-function was discussed earlier Heartbeat for the LaFonera (shows active Foneros maps-fon.com)