Belkin Share Max N300 F7D7301 F7D3301

From DD-WRT Wiki

Revision as of 21:06, 30 November 2017 by Ian5142 (Talk | contribs)
Jump to: navigation, search

Contents


Introduction

system type  : Broadcom BCM4716 chip rev 1 processor  : 0 cpu model  : MIPS 74K V4.0 BogoMIPS  : 226.09 (Linksys_WRT1900AC_v2 3188.32, MTK7620A 385.02) wait instruction  : no microsecond timers  : yes tlb_entries  : 64 extra interrupt vector  : no hardware watchpoint  : yes ASEs implemented  : mips16 dsp shadow register sets  : 1

Installation

Initial flash and CFE recovery how to http://tsengf.blogspot.com/2012/05/dd-wrt-on-belkin-share-max-n300.html

Note: This router has gigabit switch; DD-WRT Mini build doesn't have the driver for gigabit switch;

So if you do the initial flash using F7D7301-mini build or F7D3301-mini build, after flashing you want have wired network to the router, you only have wireless access to the router. You won't have ip assigned from the router if connected wired. You can't ping the router even you assign a static IP address for the wired connection. At this point, upgrade the mini build to some larger build like VPN or Mega build, then the wired switch will work as should.