Asus RT-N15
From DD-WRT Wiki
Revision as of 15:03, 25 May 2018 (edit) Ian5142 (Talk | contribs) (Removed specs, linked to wikidevi page.) ← Previous diff |
Revision as of 15:05, 25 May 2018 (edit) (undo) Ian5142 (Talk | contribs) (Added clarification on which file to use.) Next diff → |
||
Line 14: | Line 14: | ||
The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7) | The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7) | ||
- | Firmware files can be found here: [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] (asus-rt-n15 folder). | + | Firmware files can be found here: [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] (asus-rt-n15 folder). Use the factory-to-ddwrt.trx to flash from Factory firmware to dd-wrt. |
==Upgrading== | ==Upgrading== |
Revision as of 15:05, 25 May 2018
Contents |
NOTE: This device is a WIP.
NOTE: Requires K2.6, Do not flash anything else.
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.
Specs
See wikidevi page for full specs: https://wikidevi.com/wiki/ASUS_RT-N15
Threads of interest
Flashing
The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7)
Firmware files can be found here: Where do I download firmware? (asus-rt-n15 folder). Use the factory-to-ddwrt.trx to flash from Factory firmware to dd-wrt.
Upgrading
This section is in need of cleanup!
Reverting
For reset it is necessary to translate the device to an original insertion in a recovery mode. 1. We install program Restoration Firmware. 2. We drop device adjustments. 3. We disconnect the device. 4. We push the button ресет and we include a supply, without releasing the button ресет, we wait when the power indicator will start blinking, we release the button ресет. 5. We launch program Restoration Firmware, we select a file with an insertion, we stitch. 6. After a reinsertion we come into a router and we drop adjustments on the factory. We ungear the device. 7. We include a router and it is provisionable.
JTAG/Serial Info
JTAG
This router does not have JTAG.
Serial
Serial Pinouts
This section is in need of cleanup!
Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - Communication - HyperTerminal Enter a name for the connection, Click ok Choose com port you adapter is plugged into, Click ok Set: Bits per second = 115200 Data Bits = 8 Parity = none Stop bits = 1 Flow control = none Click ok Click File - Save As, and select a place to save it to so you don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it Serial line = The COM port your using for serial (ie. COM3) Speed = 115200 Click on Serial under Connection Serial line to connect to = same as above (Serial line) Speed (baud) = 115200 Data bits = 8 Stop bits = 1 Parity = None Flow control = None Click Session Enter a name for your connection under saved sessions Click Save Click Open
Serial Recovery
This section is in need of Serial Recovery Instructions!