Allnet ALL0277
From DD-WRT Wiki
(Difference between revisions)
Revision as of 05:17, 23 December 2009 (edit) DHC DarkShadow (Talk | contribs) (New page: *The Allnet ALL0277 (not DSL !!!) is essentially a relabeled Linksys WRT54G v1.0. It was even reported in the forum, that you can install the Linksys firmware on these devices. *With some...) ← Previous diff |
Current revision (08:41, 30 April 2010) (edit) (undo) Glenn (Talk | contribs) (+cat) |
||
Line 7: | Line 7: | ||
*If the ethernet interface does not work (it did not for me on v23SP2), try the wireless LAN interface to check whether the upgrade did succeed. | *If the ethernet interface does not work (it did not for me on v23SP2), try the wireless LAN interface to check whether the upgrade did succeed. | ||
*After the hard reset of the router, you should be able to proceed. | *After the hard reset of the router, you should be able to proceed. | ||
+ | |||
+ | [[Category:Linksys guides]] |
Current revision
- The Allnet ALL0277 (not DSL !!!) is essentially a relabeled Linksys WRT54G v1.0. It was even reported in the forum, that you can install the Linksys firmware on these devices.
- With some minor exceptions, the procedure to install DD-WRT the first time is pretty much the same as for other WRT54G devices.
- For flashing this device the first time you need to change the first 4 bytes of the mini_wrt54g image to read W54A (usually this is W54G). You can use a hex editor like XVI32.
- After the patch, you can upload using the new firmware using the standard ALLNET web interface.
- If the ethernet interface does not work (it did not for me on v23SP2), try the wireless LAN interface to check whether the upgrade did succeed.
- After the hard reset of the router, you should be able to proceed.