Revision as of 23:39, 10 July 2005 (edit) 212.28.55.39 (Talk) ← Previous diff |
Current revision (09:43, 14 May 2010) (edit) (undo) Glenn (Talk | contribs) |
(26 intermediate revisions not shown.) |
Line 1: |
Line 1: |
- | ---- | + | #REDIRECT [[Wl command]] |
- | '''Du bist hier: ''' '''[[Hauptseite]]'''/'''[[DD-WRT Doku (DE)]]'''/'''[[Alphabetischer Index]]'''/'''wl''' | + | |
- | ---- | + | |
- | | + | |
- | | + | |
- | __TOC__ | + | |
- | | + | |
- | | + | |
- | | + | |
- | ===wl=== | + | |
- | Usage: wl [-a|i <adapter>] [-hu] <command> [arguments] | + | |
- | | + | |
- | -a, -i adapter name or number | + | |
- | -h, -u this message | + | |
- | | + | |
- | ===cmds=== | + | |
- | *Generiert eine Komando-Kurtzübersicht | + | |
- | Die meisten wirreless-Optionen können über das Programm "wl" auch über die Console eingestellt und überwacht werden<br> | + | |
- | Eine ?bersicht über alle wl- Comandos erhält man mit der Eingabe von: | + | |
- | <pre> | + | |
- | ~ # wl cmds | + | |
- | ver cmds up down | + | |
- | out clk restart reboot | + | |
- | ucflags radio dump srdump | + | |
- | nvdump nvset nvget revinfo | + | |
- | msglevel PM wake promisc | + | |
- | monitor frag rts cwmin | + | |
- | cwmax srl lrl rate | + | |
- | mrate infra ap bssid | + | |
- | channel tssi txpwr txpwr1 | + | |
- | txpathpwr txpwrlimit powerindex atten | + | |
- | phyreg radioreg shmem macreg | + | |
- | antdiv txant plcphdr phytype | + | |
- | scbdump ratedump rateparam wepstatus | + | |
- | primary_key addwep rmwep wep | + | |
- | tkip aes keys tsc | + | |
- | wsec_test tkip_countermeasures wsec_restrict eap | + | |
- | authorize deauthorize deauthenticate wsec | + | |
- | wpa_auth set_pmk scan passive | + | |
- | regulatory spect scanresults assoc | + | |
- | status disassoc chanlist channels | + | |
- | channels_in_country curpower scansuppress evm | + | |
- | rateset roam_trigger roam_delta roam_scan_period | + | |
- | suprates scan_channel_time scan_unassoc_time scan_home_time | + | |
- | scan_passive_time scan_nprobes prb_resp_timeout channel_qa | + | |
- | channel_qa_start country locale join | + | |
- | ssid mac macmode wds | + | |
- | lazywds noise fqacurcy crsuprs | + | |
- | int lbt band bands | + | |
- | phylist shortslot shortslot_override shortslot_restrict | + | |
- | ignore_bcns pktcnt upgrade gmode | + | |
- | gmode_protection gmode_protection_control gmode_protection_cts gmode_protection_override | + | |
- | legacy_erp scb_timeout assoclist rssi | + | |
- | isup fasttimer slowtimer glacialtimer | + | |
- | radar rssidump interference aciargs | + | |
- | frameburst pwr_percent wet dtim | + | |
- | wds_remote_mac wds_wpa_role_old wds_wpa_role authe_sta_list | + | |
- | autho_sta_list measure_req quiet csa | + | |
- | constraint rm_req rm_rep wme | + | |
- | sta_info cap | + | |
- | ~ # | + | |
- | </pre> | + | |
- | | + | |
- | Dieses Programm beherrscht weit mehr Optionen als unser WRT überhaupt verarbeiten kann.<br> | + | |
- | Einige können nur im Client-Modus und andere nur im AP-Modus verwendet werden.<br> | + | |
- | | + | |
- | ===ver=== | + | |
- | *Versionsinformation | + | |
- | <pre> | + | |
- | ~ # wl ver | + | |
- | wl: 3.60 RC13.0 | + | |
- | wl0: Aug 2 2004 14:32:51 version 3.60.13.0 | + | |
- | ~ # | + | |
- | </pre> | + | |
- | | + | |
- | ===up down out radio restart=== | + | |
- | *~ # wl up | + | |
- | Adapter reinitialisieren und Bereitschaft anzeigen. | + | |
- | *~ # wl down | + | |
- | Adapter zurücksetzen und ausschalten. | + | |
- | *~ # wl out | + | |
- | Adapter ausschalten one ihn zurückzusetzen. | + | |
- | *~ # wl radio | + | |
- | Funk an/aus | + | |
- | <pre> | + | |
- | ~ # wl radio | + | |
- | radio is on (WL_RADIO_SW_DISABLE 0 WL_RADIO_HW_DISABLE 0) | + | |
- | ~ # wl radio off | + | |
- | ~ # wl radio | + | |
- | radio is off (WL_RADIO_SW_DISABLE 1 WL_RADIO_HW_DISABLE 0) | + | |
- | ~ # wl radio on | + | |
- | </pre> | + | |
- | *~ # wl restart | + | |
- | Gerätetreiber neu laden. | + | |
- | | + | |
- | | + | |
- | ===clk=== | + | |
- | *set board clock state. return error for set_clk attempt if the driver is not down | + | |
- | 0: clock off | + | |
- | 1: clock on | + | |
- | | + | |
- | ===reboot=== | + | |
- | Reboot platform | + | |
- | | + | |
- | ===ucflags=== | + | |
- | *Get/Set ucode flags | + | |
- | | + | |
- | ===dump=== | + | |
- | *print driver software state and chip registers to stdout | + | |
- | <pre> | + | |
- | ~ # wl dump | + | |
- | wl0: Aug 2 2004 14:32:51 version 3.60.13.0 | + | |
- | | + | |
- | resets 27 | + | |
- | perm_etheraddr 00:90:4c:xx:xx:xx cur_etheraddr 00:12:17:xx:xx:xx | + | |
- | board 0x101, board rev 1.0 | + | |
- | wsec 0 auth 0 wsec_index -1 wep_algo 0 | + | |
- | rate_override 0 | + | |
- | antdiv_override 1 txant 1 | + | |
- | current_bss.BSSID 00:fb:dd:xx:xx:xx | + | |
- | current_bss.SSID "www.fbn-dd.de (HSS)" | + | |
- | assoc_state 0 associated 1 | + | |
- | ~ # | + | |
- | </pre> | + | |
- | | + | |
- | ===srdump=== | + | |
- | *print contents of SPROM to stdout | + | |
- | (weder im AP, noch im Client-Modus eine Ausgabe)??? | + | |
- | | + | |
- | ===nvdump=== | + | |
- | *print nvram variables to stdout | + | |
- | (keine Ausgabe. <b>nvram show</b> benutzen!) | + | |
- | | + | |
- | ===nvset=== | + | |
- | *set an nvram variable | + | |
- | name=value (no spaces around '=') | + | |
- | | + | |
- | | + | |
- | ===nvget=== | + | |
- | *get the value of an nvram variable | + | |
- | | + | |
- | | + | |
- | ===revinfo=== | + | |
- | *get hardware revision information | + | |
- | <pre> | + | |
- | ~ # wl revinfo | + | |
- | vendorid: 0x14e4 | + | |
- | deviceid: 0x4320 | + | |
- | radiorev: 0x22050000 | + | |
- | chipnum: 0x4712 | + | |
- | chiprev: 0x1 | + | |
- | corerev: 0x7 | + | |
- | boardid: 0x101 | + | |
- | boardvendor: 0x14e4 | + | |
- | boardrev: 0x10 | + | |
- | driverrev: 0x33c0d00 | + | |
- | ucoderev: 0x1180016 | + | |
- | bus: 0x0 | + | |
- | ~ # | + | |
- | </pre> | + | |
- | | + | |
- | | + | |
- | ===msglevel=== | + | |
- | *set driver console debugging message bitvector | + | |
- | type 'wl msglevel ?' for values | + | |
- | | + | |
- | ===PM=== | + | |
- | *set driver power management mode: | + | |
- | 0: CAM (constantly awake) | + | |
- | 1: PS (power-save) | + | |
- | 2: FAST PS mode | + | |
- | | + | |
- | ===wake=== | + | |
- | *set driver power-save mode sleep state: | + | |
- | 0: core-managed | + | |
- | 1: awake | + | |
- | | + | |
- | ===promisc=== | + | |
- | *set promiscuous mode ethernet address reception | + | |
- | 0 - disable | + | |
- | 1 - enable | + | |
- | | + | |
- | ===monitor=== | + | |
- | *set monitor mode | + | |
- | 0 - disable | + | |
- | 1 - enable active monitor mode (interface still operates) | + | |
- | | + | |
- | ===frag=== | + | |
- | *Set the fragmentation threshhold. (integer [256, 2346]) | + | |
- | | + | |
- | ===rts=== | + | |
- | *Set the RTS threshhold. (integer [0, 2347]) | + | |
- | | + | |
- | ===cwmin cwmax=== | + | |
- | *cwmin | + | |
- | Set the cwmin. (integer [1, 255]) | + | |
- | *cwmax | + | |
- | Set the cwmax. (integer [256, 2047]) | + | |
- | | + | |
- | ===srl lrl=== | + | |
- | *srl | + | |
- | Set the short retry limit. (integer [1, 255]) | + | |
- | *lrl | + | |
- | Set the long retry limit. (integer [1, 255]) | + | |
- | | + | |
- | ===rate=== | + | |
- | *force a fixed rate: | + | |
- | valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) | + | |
- | valid values for 802.11b are (1, 2, 5.5, 11) | + | |
- | valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) | + | |
- | -1 (default) means automatically determine the best rate | + | |
- | | + | |
- | ===mrate=== | + | |
- | *force a fixed multicast rate: | + | |
- | valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) | + | |
- | valid values for 802.11b are (1, 2, 5.5, 11) | + | |
- | valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) | + | |
- | -1 (default) means automatically determine the best rate | + | |
- | | + | |
- | ===infra=== | + | |
- | *Set Infrastructure mode: 0 (IBSS) or 1 (Infra BSS) | + | |
- | | + | |
- | ===ap=== | + | |
- | *Set AP mode: 0 (STA) or 1 (AP) | + | |
- | | + | |
- | ===bssid=== | + | |
- | *Get the BSSID value, error if STA and not associated | + | |
- | | + | |
- | ===channel=== | + | |
- | *Set the channel: | + | |
- | valid channels for 802.11b/g (2.4GHz band) are 1 through 14 | + | |
- | valid channels for 802.11a (5 GHz band) are: | + | |
- | 36, 40, 44, 48, 52, 56, 60, 64, | + | |
- | 100, 104, 108, 112, 116,120, 124, 128, 132, 136, 140, | + | |
- | 149, 153, 157, 161, | + | |
- | 184, 188, 192, 196, 200, 204, 208, 212, 216 | + | |
- | | + | |
- | tssi Get the tssi value from radio | + | |
- | | + | |
- | txpwr Set tx power in milliwatts. Range [1, 84]. (Deprecated: Use txpwr1 instead) | + | |
- | | + | |
- | txpwr1 Set tx power in in various units. Choose one of (default: dbm): | + | |
- | -d dbm units | + | |
- | -q quarter dbm units | + | |
- | -m milliwatt units | + | |
- | Can be combined with: | + | |
- | -o turn on override to disable regulatory and other limitations | + | |
- | | + | |
- | txpathpwr | + | |
- | Turn the tx path power on or off on 2050 radios | + | |
- | | + | |
- | txpwrlimit | + | |
- | Return current tx power limit | + | |
- | | + | |
- | powerindex | + | |
- | Set the transmit power for A band(0-63). | + | |
- | -1 - default value | + | |
- | | + | |
- | atten Set the transmit attenuation for B band. Args: bb radio txctl1. | + | |
- | auto to revert to automatic control | + | |
- | | + | |
- | phyreg Get/Set a phy register. | + | |
- | | + | |
- | radioreg | + | |
- | Get/Set a radio register. | + | |
- | | + | |
- | shmem Get/Set a shared memory location. | + | |
- | | + | |
- | macreg Get/Set any mac registers(include IHR and SB) | + | |
- | macreg offset size[2,4] [value] | + | |
- | | + | |
- | antdiv Set antenna diversity for rx | + | |
- | 0 - force use of antenna 0 | + | |
- | 1 - force use of antenna 1 | + | |
- | 3 - automatic selection of antenna diversity | + | |
- | | + | |
- | txant Set the transmit antenna | + | |
- | 0 - force use of antenna 0 | + | |
- | 1 - force use of antenna 1 | + | |
- | 3 - use the RX antenna selection that was in force during | + | |
- | the most recently received good PLCP header | + | |
- | | + | |
- | plcphdr Set the plcp header. | + | |
- | "long" or "auto" or "debug" | + | |
- | | + | |
- | phytype Get phy type | + | |
- | | + | |
- | scbdump print driver scb state to stdout | + | |
- | | + | |
- | ratedump | + | |
- | print driver rate selection tunables and | + | |
- | per-scb state to stdout, valid scb values are | + | |
- | 0 through NSCB-1 | + | |
- | | + | |
- | rateparam | + | |
- | set driver rate selection tunables | + | |
- | arg 1: tunable id | + | |
- | arg 2: tunable value | + | |
- | | + | |
- | wepstatus | + | |
- | Set or Get WEP status | + | |
- | wepstatus [on|off] | + | |
- | | + | |
- | primary_key | + | |
- | Set or get index of primary key | + | |
- | | + | |
- | addwep Set an encryption key. The key must be 5, 13 or 16 bytes long, or | + | |
- | 10, 26, 32, or 64 hex digits long. The encryption algorithm is | + | |
- | automatically selected based on the key size. keytype is accepted | + | |
- | only when key length is 16 bytes/32 hex digits and specifies | + | |
- | whether AES-OCB or AES-CCM encryption is used. Default is ccm. | + | |
- | addwep <keyindex> <keydata> [ocb | ccm] [notx] [xx:xx:xx:xx:xx:xx] | + | |
- | | + | |
- | rmwep Remove the encryption key at the specified key index. | + | |
- | | + | |
- | wep Set WEP options. | + | |
- | wl wep [options] | + | |
- | [on|enable|1] enable WEP | + | |
- | [off|disable|0] disable WEP | + | |
- | [sw|software] perform WEP in software | + | |
- | [hw|hardware] perform WEP in hardware | + | |
- | | + | |
- | tkip Set TKIP options. | + | |
- | wl tkip [options] | + | |
- | [on|enable|1] enable TKIP | + | |
- | [off|disable|0] disable TKIP | + | |
- | [sw|software] perform TKIP in software | + | |
- | [hw|hardware] perform TKIP in hardware | + | |
- | | + | |
- | aes Set AES options. | + | |
- | wl aes [options] | + | |
- | [on|enable|1] enable AES | + | |
- | [off|disable|0] disable AES | + | |
- | [sw|software] perform AES in software | + | |
- | [hw|hardware] perform AES in hardware | + | |
- | | + | |
- | keys Prints a list of the current WEP keys | + | |
- | | + | |
- | tsc Print Tx Sequence Couter for key at specified key index. | + | |
- | | + | |
- | wsec_test | + | |
- | Generate wsec errors | + | |
- | wsec_test <test_type> <keyindex|xx:xx:xx:xx:xx:xx> | + | |
- | type 'wl wsec_test ?' for test_types | + | |
- | | + | |
- | tkip_countermeasures | + | |
- | Enable or disable TKIP countermeasures (TKIP-enabled AP only) | + | |
- | 0 - disable | + | |
- | 1 - enable | + | |
- | | + | |
- | wsec_restrict | + | |
- | Drop unencrypted packets if WSEC is enabled | + | |
- | 0 - disable | + | |
- | 1 - enable | + | |
- | | + | |
- | eap restrict traffic to 802.1X packets until 802.1X authorization succeeds | + | |
- | 0 - disable | + | |
- | 1 - enable | + | |
- | | + | |
- | authorize | + | |
- | restrict traffic to 802.1X packets until 802.1X authorization succeeds | + | |
- | | + | |
- | deauthorize | + | |
- | do not restrict traffic to 802.1X packets until 802.1X authorization succeeds | + | |
- | | + | |
- | deauthenticate | + | |
- | deauthenticate a STA from the AP with optional reason code (AP ONLY) | + | |
- | | + | |
- | wsec wireless security bit vector | + | |
- | 1 - WEP enabled | + | |
- | 2 - TKIP enabled | + | |
- | 4 - AES enabled | + | |
- | 8 - WSEC in software | + | |
- | | + | |
- | wpa_auth | + | |
- | WPA authorization mode | + | |
- | [none|0] none | + | |
- | [unspecified|1] WPA 802.1X | + | |
- | [psk|2] WPA PSK | + | |
- | [disable|255] disable WPA | + | |
- | | + | |
- | set_pmk Set passphrase for PMK in driver-resident supplicant. | + | |
- | | + | |
- | scan Initiate a scan. | + | |
- | Default an active scan across all channels for any SSID. | + | |
- | Optional arg: SSID, the SSID to scan. | + | |
- | Options: | + | |
- | -s S, --ssid=S SSID to scan | + | |
- | -t ST, --scan_type=ST [active|passive] scan type | + | |
- | --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan | + | |
- | -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx | + | |
- | -n N, --nprobes=N number of probes per scanned channel | + | |
- | -a N, --active=N dwell time per channel for active scanning | + | |
- | -p N, --passive=N dwell time per channel for passive scanning | + | |
- | -h N, --home=N dwell time for the home channel between channel scans | + | |
- | -c L, --channels=L comma or space separated list of channels to scan | + | |
- | | + | |
- | passive Puts scan engine into passive mode | + | |
- | | + | |
- | regulatory | + | |
- | Get/Set regulatory domain mode (802.11d). Driver must be down. | + | |
- | | + | |
- | spect Get/Set 802.11h Spectrum Management mode. | + | |
- | 0 - Off | + | |
- | 1 - Loose interpretation of spec - may join non-11h APs | + | |
- | 2 - Strict interpretation of spec - may not join non-11h APs | + | |
- | | + | |
- | scanresults | + | |
- | Return results from last scan. | + | |
- | | + | |
- | assoc Print information about current network association. | + | |
- | (also known as "status") | + | |
- | | + | |
- | status Print information about current network association. | + | |
- | (also known as "assoc") | + | |
- | | + | |
- | disassoc | + | |
- | Disassociate from the current BSS/IBSS. | + | |
- | | + | |
- | chanlist | + | |
- | Return valid channels for the current settings. | + | |
- | | + | |
- | channels | + | |
- | Return valid channels for the current settings. | + | |
- | | + | |
- | channels_in_country | + | |
- | Return valid channels for the country specified. | + | |
- | Arg 1 is the country abbreviation | + | |
- | Arg 2 is the band(a or b) | + | |
- | | + | |
- | curpower | + | |
- | Return current tx power settings | + | |
- | | + | |
- | scansuppress | + | |
- | Suppress all scans for testing. | + | |
- | 0 - allow scans | + | |
- | 1 - suppress scans | + | |
- | | + | |
- | evm Start an EVM test on the given channel, or stop EVM test. | + | |
- | Arg 1 is channel number 1-14, or "off" or 0 to stop the test. | + | |
- | Arg 2 is optional rate (1, 2, 5.5 or 11) | + | |
- | | + | |
- | rateset Returns or sets the supported and basic rateset, (b) indicates basic | + | |
- | With no args, returns the rateset. Args are | + | |
- | rateset "default" | "all" | <arbitrary rateset> | + | |
- | default - driver defaults | + | |
- | all - all rates are basic rates | + | |
- | arbitrary rateset - list of rates | + | |
- | List of rates are in Mbps and each rate is optionally followed | + | |
- | by "(b)" or "b" for a Basic rate. Example: 1(b) 2b 5.5 11 | + | |
- | At least one rate must be Basic for a legal rateset. | + | |
- | | + | |
- | roam_trigger | + | |
- | Set the roam trigger RSSI threshold. (integer) | + | |
- | | + | |
- | roam_delta | + | |
- | Set the roam candidate qualification delta. (integer) | + | |
- | | + | |
- | roam_scan_period | + | |
- | Set the roam candidate qualification delta. (integer) | + | |
- | | + | |
- | suprates | + | |
- | Returns or sets the 11g override for the supported rateset | + | |
- | With no args, returns the rateset. Args are a list of rates, | + | |
- | or 0 or -1 to specify an empty rateset to clear the override. | + | |
- | List of rates are in Mbps, example: 1 2 5.5 11 | + | |
- | | + | |
- | scan_channel_time | + | |
- | Get/Set scan channel time | + | |
- | | + | |
- | scan_unassoc_time | + | |
- | Get/Set unassociated scan channel dwell time | + | |
- | | + | |
- | scan_home_time | + | |
- | Get/Set scan home channel dwell time | + | |
- | | + | |
- | scan_passive_time | + | |
- | Get/Set passive scan channel dwell time | + | |
- | | + | |
- | scan_nprobes | + | |
- | Get/Set scan parameter for number of probes to use per channel scanned | + | |
- | | + | |
- | prb_resp_timeout | + | |
- | Get/Set probe response timeout | + | |
- | | + | |
- | channel_qa | + | |
- | Get last channel quality measurment | + | |
- | | + | |
- | channel_qa_start | + | |
- | Start a channel quality measurment | + | |
- | | + | |
- | country Select Country code for use with 802.11d | + | |
- | Use either long name or abbreviation from ISO 3166. | + | |
- | Use 'wl country list [band(a or b)]' for the list of supported countries | + | |
- | | + | |
- | locale OBSOLETE: use "wl country" | + | |
- | Select the country: | + | |
- | Worldwide | + | |
- | Thailand | + | |
- | Israel | + | |
- | Jordan | + | |
- | China | + | |
- | Japan | + | |
- | USA/Canada/ANZ | + | |
- | Europe | + | |
- | USAlow | + | |
- | JapanHigh | + | |
- | All | + | |
- | | + | |
- | join Join a specified network SSID. | + | |
- | Join syntax is: join <ssid> [key xxxxx] [imode bss|ibss] [amode open|shared|wpa|wpapsk|wpanone] | + | |
- | | + | |
- | ssid Set or get the current SSID. | + | |
- | Setting will initiate an assoication attempt if in infrastructure mode, | + | |
- | or join/creation of an IBSS if in IBSS mode, | + | |
- | or creation of a BSS if in AP mode. | + | |
- | | + | |
- | mac Set or get the list of source MAC address matches. | + | |
- | wl mac xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...] | + | |
- | To Clear the list: wl mac none | + | |
- | | + | |
- | macmode Set the mode of the MAC list. | + | |
- | 0 - Disable MAC address matching. | + | |
- | 1 - Deny association to stations on the MAC list. | + | |
- | 2 - Allow association to stations on the MAC list. | + | |
- | | + | |
- | wds Set or get the list of WDS member MAC addresses. | + | |
- | Set using a space separated list of MAC addresses. | + | |
- | wl wds xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...] | + | |
- | | + | |
- | lazywds Set or get "lazy" WDS mode (dynamically grant WDS membership to anyone). | + | |
- | | + | |
- | noise Get noise (moving average) right after tx in dBm | + | |
- | | + | |
- | fqacurcy | + | |
- | Manufacturing test: set frequency accuracy mode. | + | |
- | freqacuracy syntax is: fqacurcy <channel> | + | |
- | Arg is channel number 1-14, or 0 to stop the test. | + | |
- | | + | |
- | crsuprs Manufacturing test: set carrier suppression mode. | + | |
- | carriersuprs syntax is: crsuprs <channel> | + | |
- | Arg is channel number 1-14, or 0 to stop the test. | + | |
- | | + | |
- | int Interrupt Test - remember to precede by 'wl down' and follow by 'wl up' | + | |
- | | + | |
- | lbt Loopback Test - remember to precede by 'wl down' and follow by 'wl up' | + | |
- | | + | |
- | band Returns or sets the current band | + | |
- | auto - auto switch between available bands (default) | + | |
- | a - force use of 802.11a band | + | |
- | b - force use of 802.11b band | + | |
- | | + | |
- | bands Return the list of available 802.11 bands | + | |
- | | + | |
- | phylist Return the list of available phytypes | + | |
- | | + | |
- | shortslot | + | |
- | Get/Set 11g Short Slot Timing mode. (-1=auto, 0=long, 1=short) | + | |
- | | + | |
- | shortslot_override | + | |
- | Get/Set 11g Short Slot Timing mode override. (-1=auto, 0=long, 1=short) | + | |
- | | + | |
- | shortslot_restrict | + | |
- | Get/Set AP Restriction on associations for 11g Short Slot Timing capable STAs. | + | |
- | 0 - Do not restrict association based on ShortSlot capability | + | |
- | 1 - Restrict association to STAs with ShortSlot capability | + | |
- | | + | |
- | ignore_bcns | + | |
- | AP only (G mode): Check for beacons without NONERP element (0=Examine beacons, 1=Ignore beacons) | + | |
- | | + | |
- | pktcnt Get the summary of good and bad packets. | + | |
- | | + | |
- | upgrade Upgrade the firmware on an embedded device | + | |
- | | + | |
- | gmode Set the 54g Mode (LegacyB|Auto||GOnly|BDeferred|Performance|LRS|Afterburner) | + | |
- | | + | |
- | gmode_protection | + | |
- | Get G protection mode. (0=disabled, 1=enabled) | + | |
- | | + | |
- | gmode_protection_control | + | |
- | Get/Set 11g protection mode control alg. (0=always off, 1=monitor local association, 2=monitor overlapping BSS) | + | |
- | | + | |
- | gmode_protection_cts | + | |
- | Get/Set 11g protection type to CTS (0=disable, 1=enable) | + | |
- | | + | |
- | gmode_protection_override | + | |
- | Get/Set 11g protection mode override. (-1=auto, 0=disable, 1=enable) | + | |
- | | + | |
- | legacy_erp | + | |
- | Get/Set 11g legacy ERP inclusion (0=disable, 1=enable) | + | |
- | | + | |
- | scb_timeout | + | |
- | AP only: inactivity timeout value for authenticated stas | + | |
- | | + | |
- | assoclist | + | |
- | AP only: Get the list of associated MAC addresses. | + | |
- | | + | |
- | rssi Get the current RSSI val, for an AP you must specify the mac addr of the STA | + | |
- | | + | |
- | isup Get driver operational state (0=down, 1=up) | + | |
- | | + | |
- | fasttimer | + | |
- | Get/Set High frequency watchdog timeout (tx_power) [15 sec] | + | |
- | | + | |
- | slowtimer | + | |
- | Get/Set Low frequency watchdog timeout (nrssislope) [60 sec] | + | |
- | | + | |
- | glacialtimer | + | |
- | Get/Set Very Low frequency watchdog timeout (measurelo) [120 sec] | + | |
- | | + | |
- | radar Enable/Disable radar | + | |
- | | + | |
- | rssidump | + | |
- | Dump rssi values from aci scans | + | |
- | | + | |
- | interference | + | |
- | Get/Set interference mitigation mode. Choices are: | + | |
- | 0 = none | + | |
- | 1 = non wlan | + | |
- | 2 = wlan manual | + | |
- | 3 = wlan automatic | + | |
- | | + | |
- | aciargs Get/Set various aci tuning parameters. Choices are: | + | |
- | enter: CRS glitch trigger level to start detecting ACI | + | |
- | exit: CRS glitch trigger level to exit ACI mode | + | |
- | glitch Seconds interval between ACI scans when glitchcount is continuously high | + | |
- | spin: Num microsecs to delay between rssi samples | + | |
- | Usage: wl aciargs [enter x][exit x][spin x][glitch x] | + | |
- | | + | |
- | frameburst | + | |
- | Disable/Enable frameburst mode | + | |
- | | + | |
- | pwr_percent | + | |
- | Get/Set power output percentage | + | |
- | | + | |
- | wet Get/Set wireless ethernet bridging mode | + | |
- | | + | |
- | dtim Get/Set DTIM | + | |
- | | + | |
- | wds_remote_mac | + | |
- | Get WDS link remote endpoint's MAC address | + | |
- | | + | |
- | wds_wpa_role_old | + | |
- | Get WDS link local endpoint's WPA role (old) | + | |
- | | + | |
- | wds_wpa_role | + | |
- | Get/Set WDS link local endpoint's WPA role | + | |
- | | + | |
- | authe_sta_list | + | |
- | Get authenticated sta mac address list | + | |
- | | + | |
- | autho_sta_list | + | |
- | Get authorized sta mac address list | + | |
- | | + | |
- | measure_req | + | |
- | Send an 802.11h measurement request. | + | |
- | Usage: wl measure_req <type> <target MAC addr> | + | |
- | Measurement types are: TPC, Basic, CCA, RPI | + | |
- | Target MAC addr format is xx:xx:xx:xx:xx:xx | + | |
- | | + | |
- | quiet Send an 802.11h quiet command. | + | |
- | Usage: wl quiet <TBTTs until start>, <duration (in TUs)>, <offset (in TUs)> | + | |
- | | + | |
- | csa Send an 802.11h channel switch anouncement | + | |
- | Usage wl csa <mode> <when (in TBTTs)> <channel> | + | |
- | | + | |
- | constraint | + | |
- | Send an 802.11h Power Constraint IE | + | |
- | Usage: wl constraint 1-255 db | + | |
- | | + | |
- | rm_req Request a radio measurement of type basic, cca, or rpi | + | |
- | specify a series of measurement types each followed by options. | + | |
- | example: wl rm_req cca -c 1 -d 50 cca -c 6 cca -c 11 | + | |
- | Options: | + | |
- | -t n numeric token id for measurement set or measurement | + | |
- | -c n channel | + | |
- | -d n duration in TUs (1024 us) | + | |
- | -p parallel flag, measurement starts at the same time as previous | + | |
- | | + | |
- | Each measurement specified uses the same channel and duration as the | + | |
- | previous unless a new channel or duration is specified. | + | |
- | | + | |
- | rm_rep Get current radio measurement report | + | |
- | | + | |
- | wme Set WME (Wireless Multimedia Extensions) mode (0=off, 1=on) | + | |
- | | + | |
- | sta_info | + | |
- | wl sta_info <xx:xx:xx:xx:xx:xx> | + | |
- | | + | |
- | cap wl cap will dispaly WL Capabilities | + | |
- | | + | |
- | ---- | + | |
- | '''Du bist hier: ''' '''[[Hauptseite]]'''/'''[[DD-WRT Doku (DE)]]'''/'''[[Alphabetischer Index]]'''/'''wl''' | + | |
- | ---- | + | |