Wireless-N Configuration
From DD-WRT Wiki
Configuring your Wireless Settings for N Speeds
First your router must be upgraded to the newest firmware, and obviously MUST be an N capable unit. There are many different factors that can affect N performance. RF interference, Router brands, Congested Wireless locations etc.
All N capable routers are MIMO (Multiple Input/Multiple Output). Technical Specs
Due to this fact, multiple antennas will operate on different frequencies in order to provide the best signal quality regardless of the location.
As for the following, these configurations worked for that particular user. So don't think that they will work for you!
For the WRT310N
These configuration settings proved successful
Basic Config
- Wireless Network Mode Mixed
- Channel 4 (was the least populated for my area)
- Channel Width 40 Mhz
- Wide Channel Upper
- Wireless Security WPA2 AEP (TKIP+AES didn't work for me)
Advanced Settings
- Frame Burst Disabled
- Afterburner Disabled
- TX Power 28
For ASUS WL500W
Using EKO SVN 13000 V24sp2 NEWD-2 Big
Basic Config
- Wireless Network Mode Mixed
- Channel Auto
- Channel Width Auto
- Wireless Security WPA2 Personal Mixed (TKIP+AES)
Advanced Settings
- MIMO - Transmission Fixed Rate Auto
- Transmission Fixed Rate Auto
- Frame Burst Disable
- Afterburner Disable
- TX Power 71
http://s287.photobucket.com/albums/ll125/Masterman86/?action=view¤t=Wireless.png