Wireless-N Configuration
From DD-WRT Wiki
(Difference between revisions)
Revision as of 20:38, 11 October 2009 (edit) Masterman (Talk | contribs) (New page: ===Configuring your Wireless Settings for N Speeds=== First your router must be upgraded to the newest firmware, and obviously MUST be an N capable unit. There are many different factor...) ← Previous diff |
Revision as of 20:40, 11 October 2009 (edit) (undo) Masterman (Talk | contribs) (→For ASUS WL500W) Next diff → |
||
Line 38: | Line 38: | ||
==For ASUS WL500W== | ==For ASUS WL500W== | ||
+ | |||
+ | Using EKO SVN 13000 V24sp2 NEWD-2 Big | ||
+ | |||
'''Basic Config''' | '''Basic Config''' | ||
Line 54: | Line 57: | ||
*MIMO - Transmission Fixed Rate '''Auto''' | *MIMO - Transmission Fixed Rate '''Auto''' | ||
+ | |||
+ | *Transmission Fixed Rate '''Auto''' | ||
*Frame Burst '''Disable''' | *Frame Burst '''Disable''' |
Revision as of 20:40, 11 October 2009
Configuring your Wireless Settings for N Speeds
First your router must be upgraded to the newest firmware, and obviously MUST be an N capable unit. There are many different factors that can affect N performance. RF interference, Router brands, Congested Wireless locations etc.
All N capable routers are MIMO (Multiple Input/Multiple Output). Technical Specs
Due to this fact, multiple antennas will operate on different frequencies in order to provide the best signal quality regardless of the location.
For the WRT310N
These configuration settings proved successful
Basic Config
- Wireless Network Mode Mixed
- Channel 4 (was the least populated for my area)
- Channel Width 40 Mhz
- Wide Channel Upper
- Wireless Security WPA2 AEP (TKIP+AES didn't work for me)
Advanced Settings
- Frame Burst Disabled
- Afterburner Disabled
- TX Power 28
For ASUS WL500W
Using EKO SVN 13000 V24sp2 NEWD-2 Big
Basic Config
- Wireless Network Mode Mixed
- Channel Auto
- Channel Width Auto
- Wireless Security WPA2 Personal Mixed (TKIP+AES)
Advanced Settings
- MIMO - Transmission Fixed Rate Auto
- Transmission Fixed Rate Auto
- Frame Burst Disable
- Afterburner Disable
- TX Power 71