Wireless-N Configuration

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 21:08, 11 October 2009 (edit)
Masterman (Talk | contribs)
(For ASUS WL500W)
← Previous diff
Revision as of 23:37, 11 October 2009 (edit) (undo)
Masterman (Talk | contribs)
(For the WRT310N)
Next diff →
Line 13: Line 13:
==For the WRT310N== ==For the WRT310N==
-These configuration settings proved successful+DD-WRT v24-sp2 (09/01/09) std (SVN revision 12774M NEWD Eko)
Line 38: Line 38:
*TX Power '''28''' *TX Power '''28'''
- 
==For ASUS WL500W== ==For ASUS WL500W==

Revision as of 23:37, 11 October 2009

Configuring your Wireless Settings for N Speeds

First your router must be upgraded to the newest firmware, and obviously MUST be an N capable unit. There are many different factors that can affect N performance. RF interference, Router brands, Congested Wireless locations etc.

All N capable routers are MIMO (Multiple Input/Multiple Output). Technical Specs

Due to this fact, multiple antennas will operate on different frequencies in order to provide the best signal quality regardless of the location.


As for the following, these configurations worked for that particular user. So don't think that they will work for you!

For the WRT310N

DD-WRT v24-sp2 (09/01/09) std (SVN revision 12774M NEWD Eko)


Basic Config


  • Wireless Network Mode Mixed
  • Channel 4 (was the least populated for my area)
  • Channel Width 40 Mhz
  • Wide Channel Upper
  • Wireless Security WPA2 AEP (TKIP+AES didn't work for me)


Advanced Settings


  • Frame Burst Disabled
  • Afterburner Disabled
  • TX Power 28

For ASUS WL500W

Using EKO SVN 13000 V24sp2 NEWD-2 Big


Basic Config

  • Wireless Network Mode Mixed
  • Channel Auto
  • Channel Width Auto
  • Wireless Security WPA2 Personal Mixed (TKIP+AES)


Advanced Settings


  • MIMO - Transmission Fixed Rate Auto
  • Transmission Fixed Rate Auto
  • Frame Burst Disable
  • Afterburner Disable
  • TX Power 71