WRT54G v4 Installation Tutorial

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 02:31, 2 April 2006 (edit)
204.17.32.250 (Talk)
(minor spelling change)
← Previous diff
Current revision (15:49, 6 October 2009) (edit) (undo)
DHC DarkShadow (Talk | contribs)
(Redirecting to Linksys WRT54G v4.0)
 
(34 intermediate revisions not shown.)
Line 1: Line 1:
-The following are the steps that I went through to get DD-WRT v23 installed on a WRT54G v4. I tried to take screenshots of each step as I went, so as not to confuse anyone. Following the instructions found at [http://wrt-wiki.bsr-clan.de/index.php?title=DD-WRT_Docu_%28EN%29#Steps_to_flash_through_Web_Interface Steps_to_flash_through_Web_Interface], I was ''eventually'' successful in getting DD-WRT installed. I will use some of the text from those instructions as well as inserting my screenshots and other encounters not mentioned in the above link.+#REDIRECT [[Linksys WRT54G v4.0]]
- +
- +
- +
-'''1) Download the DD-WRT v23 firmware'''<br>+
-* You must use the '''mini''' version when upgrading from original linksys firmware!+
-* Download the Mini Version 23 [http://www.dd-wrt.com/dd-wrtv2/downloads/index.php?path=dd-wrt.v23%2F&download=dd-wrt.v23.mini.zip HERE (dd-wrt.v23.mini.zip)] or go to the DD-WRT downloads section at http://www.dd-wrt.com/dd-wrtv2/index.php?link=downloads+
-* Extract the archive. Once it is downloaded and extracted from the zip archive it should look something like this:+
-http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-MiniPackage.png+
- +
- +
- +
-'''2a) Reset through the Web Interface'''<br>+
-''if you forgot the password or IP of your router, proceed to step 2b.''+
-* From a PC connected to one of the 4 LAN ports on the router open a web browser and go to the IP of the router (default IP is 192.168.1.1).+
-* You will be prompted for username and password. Username is not required. Enter password (default password is ''admin'') and you should be at the [[Web Interface]] of your WRT54G v4<br>+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockLogin.png+
- +
- +
- +
- +
-----+
-* Click the "Administration" tab.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockAdministrationTab.png+
- +
- +
- +
-----+
-* Click the "Factory Defaults" sub-tab.+
-* Select "Yes".+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockFactoryDefaults.png+
- +
- +
- +
-----+
-* Click the "Save Settings" button.+
-* A warning will pop up, click "ok".+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockFactoryDefaultsWarning.png+
- +
- +
- +
-----+
-'''2b) Reset to factory defaults'''<br>+
-* Press and hold the reset button on the back of the router for 30 seconds. This will clear your NVRAM, the configuration and reset the password to ''admin''.+
- +
- +
- +
-----+
-'''3) Upgrade Firmware'''<br>+
-<div style='color:red;text-align:center;font-weight:bold'>Do not turn off the computer, close the web browser, or turn off the router during this process!!!!!</div>+
-* From a PC connected to one of the 4 LAN ports on the router open a web browser and go to the IP 192.168.1.1.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockLogin.png+
- +
- +
- +
-----+
-* You will be prompted for username and password. Leave username blank, enter password ''admin''. Now you should be at the [[Web Interface]] of your WRT54G v4.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockLogin.png+
- +
- +
- +
-----+
-* Click the "Administration" tab+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockAdministrationTab.png+
- +
- +
- +
-----+
-* Click the "Firmware Upgrade" sub-tab.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockFirmwareUpgradeTab.png+
- +
- +
- +
-----+
-* Click the "Browse" button and select "dd-wrt.v23_mini_generic.bin" file you extracted in step 1.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockSelectMiniFirmware.png+
- +
- +
- +
-----+
-* Click the "Upgrade" button.+
-* The router will take a few minutes to upload the file, flash the firmware, and then reset.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockUpgradingProgress.png+
- +
- +
- +
-----+
-* Here is where my experience was a bit different than the instructions said it would be. I never got success message, instead of got a failed message. This is when I started to get a bit nervous that I had [[bricked|bricked]] my brand new router! So I started reading furiously through all the documentation I could get my hands on about recovering a bricked WRT when I relaunched "192.168.1.1" and found that DD-WRT was working! Don't ask me... but the flashed seemed to have worked perfectly despite the error message I got.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-StockUpgradeFailed.png+
- +
- +
- +
-----+
-* If flashed successfully you will now be at the DD-WRT web interface and the Router Name will be DD-WRT.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-DD-WRT_Working.png+
- +
- +
- +
-----+
-'''4) Reset to factory defaults AGAIN'''+
-* Repeat step 2 above. Note: step 2b (the manual way of clearing the NVRAM) is recommended to make sure the radio gets the correct parameters.+
- +
- +
- +
-----+
-'''5) Upgrade the Firmware to DD-WRT STD v23'''+
-* It is strongly advised that you enable the "Boot Wait" option under the "Administration" tab before continueing. This will help you recover in the future should you flash your router improperly. If you use v23 or higher the "Boot Wait" option is enabled by default.+
-* Download the STD Version 23 [http://dd-wrt.gruftie.com/dd-wrtv2/downloads/index.php?path=dd-wrt.v23%2F&download=dd-wrt.v23.std.zip HERE (dd-wrt.v23.std.zip)] or go to the DD-WRT downloads section at http://www.dd-wrt.com/dd-wrtv2/index.php?link=downloads+
-*Extract it+
- +
- +
- +
-----+
-* Click the "Administration" tab+
-* Click the "Firmware Upgrade" sub-tab.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-DD-WRT_UpgradeFirmware.png+
- +
- +
- +
-----+
-* Hit the browse button and select dd-wrt.v23_generic.bin that you just extracted.+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-DD-WRT_SelectSTDPackage.png+
- +
- +
- +
-----+
-* You should see the progress of the flash like so:+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-DD-WRT_STDPackageProgress.png+
- +
- +
- +
-----+
-* If the upgrade went well then you should see a success message. You're done!+
- http://angrycamel.com/dd-wrt/DD-WRT_WRT54G_v4_-DD-WRT_UpgradeSuccess.png+
- +
- +
- +
-----+
-'''6) ?? Uh-oh ??'''+
-* If your router fails to reboot (power light doesn't stop flashing, no web interface, etc) you will need to [[Recover from a Bad Flash]].+

Current revision

  1. REDIRECT Linksys WRT54G v4.0