WL-500g Premium V2

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 06:10, 7 August 2009 (edit)
Holstweb (Talk | contribs)
m (Hardware)
← Previous diff
Current revision (10:03, 15 March 2010) (edit) (undo)
Krapet (Talk | contribs)
(redirected to article with standard title type)
 
(16 intermediate revisions not shown.)
Line 1: Line 1:
-=Introduction=+#REDIRECT [[Asus WL-500g Premium V2]]
-Thought this would be a good place for '''ASUS WL-500G Premium v2''' specific information similar to what has been added for other router makes and models. It would probably be relevant to merge any existing and future v1 content here if anyone wishes, as the differences are relatively minor.+
- +
-==Details on version 1==+
-http://oleg.wl500g.info/devices.html+
- +
-=Observations=+
-At its heart, the ASUS WL500PV2 is your basic Broadcom-based, Wireless 802.11g router. It sports a modern veneer of white and silver colored plastic. The length and width dimensions are slightly larger than your typical Linksys router. The status lights on the front are lit with orange LEDs. It is silent, passively cooled with plenty of ventilation holes along the top and bottom surface. The orange LEDs shine through the holes, but are only noticeable in dark lighting conditions. The AC adapter is fairly slim and does not hog up multiple spots on a standard power strip.+
- +
-It offers several advantages over more popular G routers like the venerable Linksys WRT54GL. The most predominant advantage is the 8MB flash and 32MB of SDRAM, allowing DD-WRT Mega builds and plenty of resources for increased IP connections, ipkg installs, JFFS2 partitions, etc. The dual USB 2.0 ports allow USB printers and storage devices to be connected, and the 240MHz BCM5354 is faster than the 200MHz BCM5352 found in the WRT54GL.+
- +
-One drawback of this router is the single antenna pole. It may be the case that dual antennas is just an illusion of signal range, I cannot say for sure. Also, no overclocking support in DD-WRT as of v24 SP1 and no integrated GigE switch.+
- +
-==Device Photos==+
-[[Image:asus_wl500gpv2_mini.jpg]]+
-[[Image:asus_wl500gpv2_back_mini.jpg]]+
- +
-=Hardware=+
-*'''Platform''': Broadcom MIPS+
-*'''CPU''': Broadcom BCM5454 at 240 MHz (130nm construction) [http://www.broadcom.com/collateral/pb/5354-PB01-R.pdf Technical Overview]+
-**NOT overclockable in DD-WRT as of v24 SP1+
-** /proc/cpuinfo output+
-<pre>+
-root@DD-WRT:/mnt# cat /proc/cpuinfo+
-system type : Broadcom BCM5354 chip rev 2+
-processor : 0+
-cpu model : BCM3302 V2.9+
-BogoMIPS : 239.20+
-wait instruction : no+
-microsecond timers : yes+
-tlb_entries : 32+
-extra interrupt vector : no+
-hardware watchpoint : no+
-VCED exceptions : not available+
-VCEI exceptions : not available+
-</pre>+
-*'''Flash''': 8 MB NAND, single chip+
-*'''System Memory''': 32MB 16-bit DDR SDRAM+
-*'''USB''': dual USB 2.0 ports+
-**VIA 4-port USB controller model ???+
-*'''Wireless Radio''': Broadcom BCM43xx 802.11b/g+
-**2.412 - 2.484 GHz, 14 channel increments + auto setting+
-**PCI Device 14e4:4318+
-*'''Antenna''': Single, detachable/replaceable antenna+
-*'''Network Switch''': (4) 10/100 LAN + (1) 10/100 WAN, Auto MDX+
-*'''Internal Pic''': [http://www.melbourne.wireless.org.au/files/photos/wl500gp/wl500gP-V2.JPG External Link]+
- +
-=Firmware=+
- +
-==Flashing==+
-The easiest, most reliable method to flash to 3rd party firmware is to use ASUS Firmware Restoration tool that comes on the CD bundled with the product. There is no firmware size limit requiring you to flash dd-wrt mini first; you can go ahead and flash dd-wrt v24 SP1 mega right from the start.+
- +
-When flashing from 3rd party firmware to other 3rd party firmware, just use the firmware upgrade utility in the web GUI. This applies to 3rd party firmwares that include a web GUI, as not all of them do so.+
- +
-The ASUS Firmware Restoration Utility comes with the CD-ROM included with the device and by default installs to+
-*WinXP / Vista 32-bit <code> C:\Program Files\ASUS\WL-500gP V2 Wireless Router Utilities\Rescue.exe</code>+
-*Vista 64-bit <code> C:\Program Files (x86)\ASUS\WL-500gP V2 Wireless Router Utilities\Rescue.exe</code>+
- +
- -update-+
- To flash using the "recovery" method, do the following...+
- 1) Unplug the router+
- 2) Press and hold the restore switch and plug in power.+
- 3) Keep holding the restore switch until the power light starts to blink on and off.+
- 3a) <b>The router is now in recovery mode</b>+
- 4) Change the ip settings on your computer to:+
- 4a) IP: 192.168.1.xxx(use anything above 1, I like 100)+
- 4b) Subnet: 255.255.255.0+
- 4c) Gateway: 192.168.1.1+
- 5) Run the recovery program and point it to your .bin file of choice+
- 6) Hit the "upload" button and wait about 2 minutes.+
- 7) Change your IP settings back to DHCP and let it get an address+
- 8) Open a web browset and go to http://192.168.1.1 and have fun!+
- -mspacone+
- +
-==ASUS stock firmware==+
-Of course this ASUS device works with the [http://support.asus.com/download/download.aspx?SLanguage=en-us&model=WL-500gP%20V2 latest ASUS firmware]. Patching to the latest ASUS firmware provides a notable improvement over earlier versions, even those shipping as of Oct 2008. The interface has undergone a cosmetic makeover and provides a straightforward GUI to easily set up shared printers, shared storage, Samba file serving with user credentials and of course typical router functionality. However, the firmware is unstable and requires a reboot every day or two as functionality seems to randomly break.+
- +
-==DD-WRT==+
- +
-Here is a [[What is DD-WRT?#File Versions|useful chart]] from the DD-WRT Wiki comparing the different builds. Ever wanted to know what you get in mega that you don't in std? This chart has the answers.+
- +
-===micro===+
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/micro/dd-wrt.v24_micro_generic.bin micro] (1.7 MB)+
- +
-DD-WRT micro is not a good fit for the ASUS WL-500G Premium V1/V2 router. While it has an amazing amount of functionality for such a small firmware footprint, you lose out on the SSH server, JFFS2 file system support, ipkg, WDS and more. The embedded Linux does not even have the /proc filesystem enabled, nor is their even /bin/ls available. This makes it just about impossible to add any USB devices.+
- +
-===mini===+
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/dd-wrt.v24_mini_generic.bin mini] (2.8 MB)+
- +
-===standard, vpn, voip===+
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/dd-wrt.v24_std_generic.bin standard] (3.6 MB)+
- +
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/dd-wrt.v24_vpn_generic.bin VPN] (3.5 MB)+
- +
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/dd-wrt.v24_voip_generic.bin VOIP] (3.6 MB)+
- +
-===Mega===+
-[http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v24%20SP1/Consumer/Asus/WL500g-Premium/dd-wrt.v24_mega_generic.bin Mega] (6.6 MB)+
- +
-Mega is the only build that includes USB support "baked in", although are non-Mega builds that also include USB support, such as the [http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fothers%2Feko%2FV24_TNG%2Fsvn10564/ Eko v24 NEWD mini USB firmware]. Which, has you can probably guess by the name, is a mini firmware image with the USB functionality built in. It is also possible to configure USB support on any non-micro v24 (and later) DD-WRT firmware release as long as the [[USB#USB drivers|proper USB drivers are loaded]].+
- +
-==Tomato==+
-Accepts latest [http://www.polarcloud.com/tomato Tomato firmware], but no USB support is officially possible. I have never tested it, but apparently it is possible to [http://www.jamdev.co.uk/wiki/Linux/Tomato add USB support to Tomato].+
- +
-==OpenWRT==+
-[http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GPV2?highlight=(OpenWrtDocs/Hardware) OpenWRT page for this router]+
- +
-==FreeWRT==+
-[http://www.freewrt.org/trac/ FreeWRT] is the basis for other popular firmware distributons. There is ''no web GUI'', only ssh/telnet access for management. It is not easy to upgrade from FreeWRT to other firmware. If anyone has a good guide on how to do this, please add it here because I still haven't figured it out :)+
- +
-=How To's=+
-*Here is a short guide on [[USB on ASUS WL500GPV2|configuring a basic USB printer and USB flash drive]] to make use of the dual USB 2.0 ports on this router.+
- +
-*Here is the generic DD-WRT Wiki page on [[Printer Sharing]]+
- +
-*Here is the generic DD-WRT Wiki page on [[USB storage]]+
- +
-=Links=+
-[http://www.asus.com/products.aspx?l1=12&l2=43&l3=0&l4=0&model=1712&modelmenu=2 ASUS Product Page]+

Current revision

  1. REDIRECT Asus WL-500g Premium V2