WL-500g Premium V2
From DD-WRT Wiki
(Difference between revisions)
Revision as of 21:09, 21 October 2008 (edit) Casanova99 (Talk | contribs) m (→Hardware) ← Previous diff |
Revision as of 21:09, 21 October 2008 (edit) (undo) Casanova99 (Talk | contribs) m (→Hardware) Next diff → |
||
Line 10: | Line 10: | ||
**NOT overclockable in dd-wrt v24 SP1 | **NOT overclockable in dd-wrt v24 SP1 | ||
*Flash: 8MB | *Flash: 8MB | ||
- | *System Memory: 32MB | + | *System Memory: 32MB DDR SDRAM |
*USB: dual USB 2.0 ports | *USB: dual USB 2.0 ports | ||
*Wireless Radio: Broadcom 802.11b/g, 2.4 - 2.5 GHz, 11 channel increments | *Wireless Radio: Broadcom 802.11b/g, 2.4 - 2.5 GHz, 11 channel increments |
Revision as of 21:09, 21 October 2008
Contents |
Introduction
Thought this would be a good place for all ASUS WL-500G Premium v2 specific information much like what has been added for other router makes and models. It would probably be relevant to merge any existing and future v1 content here if anyone wishes, as the differences are relatively minor.
Device Photo
Hardware
- Platform: Broadcom MIPS
- CPU: Broadcom BCM5454 at 240 MHz
- NOT overclockable in dd-wrt v24 SP1
- Flash: 8MB
- System Memory: 32MB DDR SDRAM
- USB: dual USB 2.0 ports
- Wireless Radio: Broadcom 802.11b/g, 2.4 - 2.5 GHz, 11 channel increments
- Antenna: Single, removable antenna
- Network Switch: (4) 10/100 LAN + (1) 10/100 WAN
- Internal Pics: external link
Compatible Firmware
- ASUS stock firmware
- DD-WRT
- including DD-WRT Mega builds
- Tomato
- OpenWRT
- ???
How Tos
Here is a short guide on configuring a basic USB printer and USB flash drive to make use of the dual USB 2.0 ports on this router.