WHR-HP-G300N

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 20:12, 1 April 2012 (edit)
Buddee (Talk | contribs)
(Put in where to find build info since it seems such a chore for people to find it...)
← Previous diff
Revision as of 20:44, 22 June 2012 (edit) (undo)
Glenn (Talk | contribs)
(+ Category:Buffalo guides)
Next diff →
Line 37: Line 37:
http://www.buffalotech.com/products/wireless/routers-and-access-points/ http://www.buffalotech.com/products/wireless/routers-and-access-points/
 +
 +[[Category:Buffalo guides]]

Revision as of 20:44, 22 June 2012

The WHR-HP-G300N

The WHR-HP-G300N Router
The WHR-HP-G300N Router

Basic Features

  • Wireless N
  • 4 x 100mb/s ports
  • AOSS
  • DHCP
  • Cable Router
  • Atheros AR7240 rev 1.2 CPU (400MHz)
  • 32MB Memory


Since the second half of 2010 the WHR-HP-G300N ships with a Buffalo supplied DD-WRT firmware installed by default. Older versions of the router are the same specifications and allow the DD-WRT firmware to be installed from the buffalo website/FTP server.

Buffalo refer to the DD-WRT firmware as the "Pro" firmware and the original firmware as the "User Friendly" firmware. Not to be confused but the "Pro" DD-WRT firmware is much more pleasing on the eye than the "User Friendly" firmware if not easier to use!

Initial Installation

Screenshot of WHR-HP-G300N Status Page
Screenshot of WHR-HP-G300N Status Page

Buffalo now provide an official DD-WRT build direct from their own FTP site.

Acoring to Buffalo documentation the new DD-WRT firmware is installed by default on the WHR-HP-G300N however mine had the original firmware

The DD-WRT firmware is named as the "Pro" firmware and is installed by default. A "User Friendly" firmware is included as optional.

To download the firmware grab the zip file from ftp://whr-hp-g300n:whr-hp-g300n@83.244.133.35/

Extract the firmware from the zip and use the web based firmware upgrade interface as usual to upgrade to the "Pro" DD-WRT firmware from the stock "User Friendly" firmware

Firmware Versions

To find the latest community DD-WRT builds for this unit you would need to browse the FTP and look for the appropriate build for your unit. Below is the link for the file server.

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/

To find buffalo DD-WRT builds you would need to go to buffalo's support site and find the downloads section for your unit.

http://www.buffalotech.com/products/wireless/routers-and-access-points/