WDS multiple router setup
From DD-WRT Wiki
Revision as of 21:01, 12 April 2009 (edit) Macgyver (Talk | contribs) ← Previous diff |
Revision as of 21:56, 12 April 2009 (edit) (undo) Macgyver (Talk | contribs) Next diff → |
||
Line 5: | Line 5: | ||
'''Router 1:''' <br> | '''Router 1:''' <br> | ||
'''WRT350N''' <br> | '''WRT350N''' <br> | ||
- | '' | + | ''Basic setup page:'' <br> |
IP 192.168.1.1 <br> | IP 192.168.1.1 <br> | ||
netmask 255.255.255.0 <br> | netmask 255.255.255.0 <br> | ||
Line 14: | Line 14: | ||
''Wireless settings:'' <br> | ''Wireless settings:'' <br> | ||
- | + | Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s) <br> | |
- | (i.e all SSID 'ddwrt' channel 6 | + | (i.e all WPA2 AES, SSID 'ddwrt', channel 6) <br> |
- | on WDS tab set to ' | + | on WDS tab set to 'LAN' mode and enter MAC address from first WRT54G <br> |
- | '' | + | ''Advanced wireless settings:'' <br> |
CTS Protection Mode disabled <br> | CTS Protection Mode disabled <br> | ||
Preamble Auto <br> | Preamble Auto <br> | ||
Line 25: | Line 25: | ||
change TCP timeouts to 120s <br> | change TCP timeouts to 120s <br> | ||
change max connections to 1024 if it is set to 512 <br> | change max connections to 1024 if it is set to 512 <br> | ||
- | '' | + | ''Services tab:'' <br> |
disable WAN traffic counter and DNS masq <br> | disable WAN traffic counter and DNS masq <br> | ||
- | '' | + | ''Security tab:'' <br> |
- | + | Uncheck 'filter ident' and 'block WAN requests', then disable SPI firewall <br> | |
''Wireless settings:'' <br> | ''Wireless settings:'' <br> | ||
Wireless mode: G-only <br> | Wireless mode: G-only <br> | ||
- | + | Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s) <br> | |
- | (i.e all SSID 'ddwrt' channel 6 | + | (i.e all WPA2 AES, SSID 'ddwrt', channel 6) <br> |
- | on WDS tab set to ' | + | on WDS tab set to 'LAN' mode and enter MAC address from WRT350N and MAC address from second WRT54G <br> |
- | '' | + | ''Advanced wireless settings:'' <br> |
CTS Protection Mode disabled <br> | CTS Protection Mode disabled <br> | ||
Preamble Auto <br> | Preamble Auto <br> | ||
- | '' | + | ''Basic setup page:'' <br> |
- | + | Connection type: disabled <br> | |
IP 192.168.1.2 <br> | IP 192.168.1.2 <br> | ||
netmask 255.255.255.0 <br> | netmask 255.255.255.0 <br> | ||
gateway 192.168.1.1 <br> | gateway 192.168.1.1 <br> | ||
- | Assign | + | Assign WAN port to switch checked (optional) <br> |
DHCP server disabled <br> | DHCP server disabled <br> | ||
- | + | Uncheck all 3 boxes in DHCP section (Use DNSMasq for DHCP/Use DNSMasq for DNS/DHCP-Authoritative) <br> | |
'''WRT54G #2''' <br> | '''WRT54G #2''' <br> | ||
Line 54: | Line 54: | ||
change max connections to 1024 if it is set to 512 <br> | change max connections to 1024 if it is set to 512 <br> | ||
- | '' | + | ''Services tab:'' <br> |
disable WAN traffic counter and DNS masq <br> | disable WAN traffic counter and DNS masq <br> | ||
- | '' | + | ''Security tab:'' <br> |
- | + | Uncheck 'filter ident' and 'block WAN requests', then disable SPI firewall <br> | |
''Wireless settings:'' <br> | ''Wireless settings:'' <br> | ||
Wireless mode: G-only <br> | Wireless mode: G-only <br> | ||
- | + | Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s) <br> | |
- | (i.e all SSID 'ddwrt' channel 6 | + | (i.e all WPA2 AES, SSID 'ddwrt', channel 6) <br> |
- | on WDS tab set to ' | + | on WDS tab set to 'LAN' mode and enter MAC address from first WRT54G <br> |
- | '' | + | ''Advanced wireless settings:'' <br> |
CTS Protection Mode disabled <br> | CTS Protection Mode disabled <br> | ||
Preamble Auto <br> | Preamble Auto <br> | ||
- | '' | + | ''Basic setup page:'' <br> |
- | + | Connection type: disabled <br> | |
IP 192.168.1.3 <br> | IP 192.168.1.3 <br> | ||
netmask 255.255.255.0 <br> | netmask 255.255.255.0 <br> | ||
gateway 192.168.1.1 <br> | gateway 192.168.1.1 <br> | ||
- | Assign | + | Assign WAN port to switch checked (optional)<br> |
DHCP server disabled <br> | DHCP server disabled <br> | ||
- | + | Uncheck all 3 boxes in DHCP section (Use DNSMasq for DHCP/Use DNSMasq for DNS/DHCP-Authoritative) <br> | |
- | Reboot | + | Reboot first router, then once first router has internet, power up second router, then third, etc... <br> |
That's it! <br> | That's it! <br> | ||
[[Category:English documentation]] | [[Category:English documentation]] |
Revision as of 21:56, 12 April 2009
Verified with DD-WRT v24-sp2 (09/04/09) build 11898 --Macgyver 22:57, 12 April 2009 (CEST)
This is a 3 router WDS setup using WRT350N and 2 WRT54G, with the 1st WRT54G connecting to the WRT350N, and the 2nd WRT54G connecting to the 1st WRT54G. I have also tested with WRT600N, WRT310N, WRT300N and WRT54GS, so any broadcom-based device should work with these settings
If you only need a 2 router WDS setup, simply ignore the third router setup options; alternately if you need more, just add as needed
Router 1:
WRT350N
Basic setup page:
IP 192.168.1.1
netmask 255.255.255.0
DHCP server enabled
Administration tab:
change TCP timeouts to 120s
Wireless settings:
Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s)
(i.e all WPA2 AES, SSID 'ddwrt', channel 6)
on WDS tab set to 'LAN' mode and enter MAC address from first WRT54G
Advanced wireless settings:
CTS Protection Mode disabled
Preamble Auto
WRT54G #1
Administration tab:
change TCP timeouts to 120s
change max connections to 1024 if it is set to 512
Services tab:
disable WAN traffic counter and DNS masq
Security tab:
Uncheck 'filter ident' and 'block WAN requests', then disable SPI firewall
Wireless settings:
Wireless mode: G-only
Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s)
(i.e all WPA2 AES, SSID 'ddwrt', channel 6)
on WDS tab set to 'LAN' mode and enter MAC address from WRT350N and MAC address from second WRT54G
Advanced wireless settings:
CTS Protection Mode disabled
Preamble Auto
Basic setup page:
Connection type: disabled
IP 192.168.1.2
netmask 255.255.255.0
gateway 192.168.1.1
Assign WAN port to switch checked (optional)
DHCP server disabled
Uncheck all 3 boxes in DHCP section (Use DNSMasq for DHCP/Use DNSMasq for DNS/DHCP-Authoritative)
WRT54G #2
Administration tab:
change TCP timeouts to 120s
change max connections to 1024 if it is set to 512
Services tab:
disable WAN traffic counter and DNS masq
Security tab:
Uncheck 'filter ident' and 'block WAN requests', then disable SPI firewall
Wireless settings:
Wireless mode: G-only
Make sure all units are using WPA2 Personal AES encryption, same SSID, and wireless channel(s)
(i.e all WPA2 AES, SSID 'ddwrt', channel 6)
on WDS tab set to 'LAN' mode and enter MAC address from first WRT54G
Advanced wireless settings:
CTS Protection Mode disabled
Preamble Auto
Basic setup page:
Connection type: disabled
IP 192.168.1.3
netmask 255.255.255.0
gateway 192.168.1.1
Assign WAN port to switch checked (optional)
DHCP server disabled
Uncheck all 3 boxes in DHCP section (Use DNSMasq for DHCP/Use DNSMasq for DNS/DHCP-Authoritative)
Reboot first router, then once first router has internet, power up second router, then third, etc...
That's it!