Revision as of 20:59, 12 April 2009 (edit) Macgyver (Talk | contribs)
← Previous diff |
Current revision (14:22, 2 April 2018) (edit) (undo) Ian5142 (Talk | contribs) |
(18 intermediate revisions not shown.) |
Line 1: |
Line 1: |
- | Verified with DD-WRT v24-sp2 (09/04/09) build 11898 --[[User:Macgyver|Macgyver]] 22:57, 12 April 2009 (CEST)<br> | + | Depreciated: |
- | This is a 3 router WDS setup using WRT350N and 2 WRT54G, with the 1st WRT54G connecting to the WRT350N, and the 2nd WRT54G connecting to the 1st WRT54G. I have also tested with WRT600N, WRT310N, WRT300N and WRT54GS, so any broadcom-based device should work with these settings<br> | + | |
| | | |
- | '''Router 1:''' <br> | + | * See [[WDS_Linked_router_network|WDS Linked router network]]. |
- | '''WRT350N''' <br> | + | |
- | ''basic setup page:'' <br> | + | |
- | IP 192.168.1.1 <br> | + | |
- | netmask 255.255.255.0 <br> | + | |
- | DHCP server enabled <br> | + | |
- | | + | |
- | ''Administration tab:'' <br> | + | |
- | change TCP timeouts to 120s <br> | + | |
- | | + | |
- | ''Wireless settings:'' <br> | + | |
- | make sure all units are using same wireless channel, SSID and encryption<br> | + | |
- | (i.e all SSID 'ddwrt' channel 6 encryption WPA2 personal AES) <br> | + | |
- | on WDS tab set to 'lan' mode and enter mac address from 1st WRT54G <br> | + | |
- | ''advanced wireless settings:'' <br> | + | |
- | CTS Protection Mode disabled <br> | + | |
- | Preamble Auto <br> | + | |
- | | + | |
- | '''WRT54G #1''' <br> | + | |
- | ''Administration tab:'' <br> | + | |
- | change TCP timeouts to 120s <br> | + | |
- | change max connections to 1024 if it is set to 512 <br> | + | |
- | ''services tab:'' <br> | + | |
- | disable WAN traffic counter and DNS masq <br> | + | |
- | | + | |
- | ''security tab:'' <br> | + | |
- | uncheck 'filter ident' and 'block wan requests', then disable SPI firewall <br> | + | |
- | | + | |
- | ''Wireless settings:'' <br> | + | |
- | Wireless mode: G-only <br> | + | |
- | make sure all units are using same wireless channel, SSID and encryption<br> | + | |
- | (i.e all SSID 'ddwrt' channel 6 encryption WPA2 personal AES) <br> | + | |
- | on WDS tab set to 'lan' mode and enter mac address from WRT350N and mac address from 2nd WRT54G <br> | + | |
- | ''advanced wireless settings:'' <br> | + | |
- | CTS Protection Mode disabled <br> | + | |
- | Preamble Auto <br> | + | |
- | | + | |
- | ''basic setup page:'' <br> | + | |
- | connection type: disabled <br> | + | |
- | IP 192.168.1.2 <br> | + | |
- | netmask 255.255.255.0 <br> | + | |
- | gateway 192.168.1.1 <br> | + | |
- | Assign wan port to switch <br> | + | |
- | DHCP server disabled <br> | + | |
- | uncheck all 3 boxes in DHCP section (dns masq/ dhcp authorative) <br> | + | |
- | | + | |
- | '''WRT54G #2''' <br> | + | |
- | ''Administration tab:'' <br> | + | |
- | change TCP timeouts to 120s <br> | + | |
- | change max connections to 1024 if it is set to 512 <br> | + | |
- | | + | |
- | ''services tab:'' <br> | + | |
- | disable WAN traffic counter and DNS masq <br> | + | |
- | | + | |
- | ''security tab:'' <br> | + | |
- | uncheck 'filter ident' and 'block wan requests', then disable SPI firewall <br> | + | |
- | | + | |
- | ''Wireless settings:'' <br> | + | |
- | Wireless mode: G-only <br> | + | |
- | make sure all units are using same wireless channel, SSID and encryption<br> | + | |
- | (i.e all SSID 'ddwrt' channel 6 encryption WPA2 personal AES) <br> | + | |
- | on WDS tab set to 'lan' mode and enter mac address from 1st WRT54G <br> | + | |
- | ''advanced wireless settings:'' <br> | + | |
- | CTS Protection Mode disabled <br> | + | |
- | Preamble Auto <br> | + | |
- | | + | |
- | ''basic setup page:'' <br> | + | |
- | connection type: disabled <br> | + | |
- | IP 192.168.1.3 <br> | + | |
- | netmask 255.255.255.0 <br> | + | |
- | gateway 192.168.1.1 <br> | + | |
- | Assign wan port to switch <br> | + | |
- | DHCP server disabled <br> | + | |
- | uncheck all 3 boxes in DHCP section (dns masq/ dhcp authorative) <br> | + | |
- | | + | |
- | Reboot 1st router, then once 1st router has internet, power up 2nd router, then 3rd <br> | + | |
- | That's it! <br> | + | |
- | [[Category:English documentation]] | + | |