WDS-AP to WDS-Sta (Atheros) Example
From DD-WRT Wiki
(Difference between revisions)
Revision as of 15:11, 15 January 2008 (edit) Samueldg (Talk | contribs) (→Objective) ← Previous diff |
Revision as of 15:14, 15 January 2008 (edit) (undo) Samueldg (Talk | contribs) (→Objective) Next diff → |
||
Line 6: | Line 6: | ||
| | | | | | | | ||
LAN LAN LAN | LAN LAN LAN | ||
+ | |||
+ | Will support Spaning tree protocol to alow the case when GW2347's were in the same Ethernet segment. | ||
+ | |||
==Definitions== | ==Definitions== | ||
The 3 LAN's are in the same IP subnet 10.1.1.0/24 (for example). | The 3 LAN's are in the same IP subnet 10.1.1.0/24 (for example). |
Revision as of 15:14, 15 January 2008
Contents |
Simple LAN WDS configuration
Objective
Connect 3 LAN using 2 GW2347 and 1 GW2348 and they will be transparent for the direfent Ethernet subnets.
GW2347_0 - - - - - GW2348 - - - - - - GW2347_1 | | | LAN LAN LAN
Will support Spaning tree protocol to alow the case when GW2347's were in the same Ethernet segment.
Definitions
The 3 LAN's are in the same IP subnet 10.1.1.0/24 (for example). The GW234x management IP will be in 192.168.5.0/24 (for example). All the GW234x has Winstron CM9 miniPCI cards into them.
Names of GW234x devices will be: acbr51 with 192.168.2.51 for the GW2347_0 acbr52 with 192.168.2.52 for the GW2348 acbr53 with 192.168.2.53 for the GW2347_1
Prerequisites
All GW234x devices are with factory defaults configuration (all has their nvram erased using RedBoot commands).