WDS-AP to WDS-Sta (Atheros) Example
From DD-WRT Wiki
(Difference between revisions)
Revision as of 15:15, 15 January 2008 (edit) Samueldg (Talk | contribs) (→Objective) ← Previous diff |
Revision as of 15:16, 15 January 2008 (edit) (undo) Samueldg (Talk | contribs) (→Objective) Next diff → |
||
Line 7: | Line 7: | ||
LAN LAN LAN | LAN LAN LAN | ||
- | Will support Spaning tree protocol to alow the case when GW2347's were in the same Ethernet segment. | + | Will support Spaning tree protocol to alow the case when GW2347's were in the same Ethernet segment. This case: |
+ | GW2347_0 - - - - - GW2348 | ||
+ | | | | ||
+ | GW2347_1 - - - - - - - | ||
==Definitions== | ==Definitions== |
Revision as of 15:16, 15 January 2008
Contents |
Simple LAN WDS configuration
Objective
Connect 3 LAN using 2 GW2347 and 1 GW2348 and they will be transparent for the diferent Ethernet subnets.
GW2347_0 - - - - - GW2348 - - - - - - GW2347_1 | | | LAN LAN LAN
Will support Spaning tree protocol to alow the case when GW2347's were in the same Ethernet segment. This case:
GW2347_0 - - - - - GW2348 | | GW2347_1 - - - - - - -
Definitions
The 3 LAN's are in the same IP subnet 10.1.1.0/24 (for example).
The GW234x management IP will be in 192.168.5.0/24 (for example).
All the GW234x has Winstron CM9 miniPCI cards into them.
Names of GW234x devices will be:
acbr51 with 192.168.2.51 for the GW2347_0
acbr52 with 192.168.2.52 for the GW2348
acbr53 with 192.168.2.53 for the GW2347_1
Prerequisites
All GW234x devices are with factory defaults configuration (all has their nvram erased using RedBoot commands).