WAN Traffic By Month
From DD-WRT Wiki
Revision as of 02:25, 1 December 2017 (edit) Ian5142 (Talk | contribs) (New page: =Introduction= Your total WAN traffic by Month is shown on a graph on the Status / WAN page at: http://192.168.1.1/Status_Internet.asp<br> Here is an example:<br> [[Image:TrafficByMonth.S...) ← Previous diff |
Current revision (02:26, 1 December 2017) (edit) (undo) Ian5142 (Talk | contribs) (→Introduction) |
||
Line 1: | Line 1: | ||
+ | {{Languages|WAN Traffic By Month}} | ||
+ | __TOC__ | ||
+ | |||
=Introduction= | =Introduction= | ||
Current revision
English • Deutsch • Español • Français • Italiano • 日本語 • Polski • Português • Русский • Svenska • 中文(中国大陆) • 中文(台灣) • |
Contents |
[edit] Introduction
Your total WAN traffic by Month is shown on a graph on the Status / WAN page at: http://192.168.1.1/Status_Internet.asp
Here is an example:
The raw data is backed up and restored when you use the Administration / Backup page at http://192.168.1.1/config.asp
You can look at the raw data in NVRAM. Log on to the router using Telnet or SSH, or use the Administration / Commands page at http://192.168.1.1/Diagnostics.asp
This command will display all of your traffic statistics and settings:
nvram show | grep traff[-_]
if ttraff_enable=1 your traffic data collection is on.
if ttraff_enable=0 your traffic data collection is off.
The traffic data is kept in nvram variables that look like this:
traff-06-2008=7322:3488 2526:2769 1127:382 673:202 1048:284 11455:3737 3613:1253 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0
Notice the naming: traff-mm-yyyy, where mm is month and yyyy is year. The data for each day is kept in pairs of inbound / outbound megabytes. 7322:3488 is for June 1 2008, 7322 MB incoming, 3488 MB outgoing.
You can display data for a single month with a command like this:
nvram get traff-06-2008
You can restore data for a single month with a command like this:
nvram set traff-04-2008="1:1 1:1"
You have to do a commit or the data will be lost at your next reboot:
nvram commit
You can also see the traffic data in the backup files.
This gives you a way to restore traffic data without restoring all the settings in the router.