WAN Port
From DD-WRT Wiki
Revision as of 14:20, 28 August 2005 by 84.180.107.196 (Talk)
Adding WAN port to Switch
In case the WRT is used as an access point within a LAN, the WAN port can easily be configured as a normal switched port:
1.)
Under "Setup" -> "Basic Setup"
Set "Internet Setup" to "Disabled"
2.)
Under "Setup" -> "VLANs"
Select checkbox for column "W" at row "Tagged". Now the checkbox for "W" at row "0" can be selected. That will ensure that the WAN port is in the same ethernet domain (VLAN0) as the rest of the switch. Deselect all other checkboxes in the "W" column including "Tagged" and save your settings.
3.)
The VLAN setting should show something like:
| Port | Assigned VLAN |-------------------| to bridge | W | 1 | 2 | 3 | 4 | -------------------------------------------- 0 | x | x | x | x | x | LAN -------------------------------------------- 1 | | | | | | None -------------------------------------------- ... -------------------------------------------- Tagged | | | | | | ------------------------------