WAN Port

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search

84.180.107.196 (Talk)
(Use WAN port as a normal switched port)
Next diff →

Revision as of 14:16, 28 August 2005

In case the WRT is used as an access point within a LAN, the WAN port can easily be configured as a normal switched port:
1.)

Under "Setup" -> "Basic Setup"
Set "Internet Setup" to "Disabled"


2.)

Under "Setup" -> "VLANs"
Select checkbox for column "W" at row "Tagged". Now the checkbox for "W" at row "0" can be selected. That will ensure that the WAN port is in the same ethernet domain (VLAN0) as the rest of the switch. Deselect all other checkboxes in the "W" column including "Tagged" and save your settings.


3.)

The VLAN setting should show something like:
             |       Port        |   Assigned
     VLAN    |-------------------|   to bridge
             | W | 1 | 2 | 3 | 4 |
    --------------------------------------------
       0     | x | x | x | x | x |     LAN
    --------------------------------------------
       1     |   |   |   |   |   |     None
    --------------------------------------------
      ...
    --------------------------------------------
     Tagged  |   |   |   |   |   |
    ------------------------------