From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 20:48, 22 June 2012 (edit)
Glenn (Talk | contribs)
(+ Category:TP-Link guides)
← Previous diff
Revision as of 20:27, 15 October 2012 (edit) (undo)
Sash (Talk | contribs)
(Replacing page with 'delete this!')
Next diff →
Line 1: Line 1:
-hi every body, i have a slight issue with an idea im having for a script to handle some traffic.+delete this!
- so my plan is to have my wrt54g dd-wrt v24 route all traffic through my ids which is connected on ethernet ports 1 and 2,+
- and then have it reroute the traffic to its original intended destination. +
-but i also would like the script be aware of the state of the ids (being either on or off) and in the occurance that the ids (smoothwall) is off then to have traffic route normaly.+
- now how would i go about this do you think? +
-i have a feeling that this is going to require a custom firewall rule, +
-but that i would imagine would only take care of the actual routing end of things, +
-not the whole "is the ids up on or off" part. would it be possible to write a script that would first see if the ids is on, +
-and if so have one set of firewall rules in place (the route through the iids rules) or if the ids is down load the default fire wall rules. +
- +
-thanks guys for those that read this, +
- +
- +
-[[Category:TP-Link guides]]+

Revision as of 20:27, 15 October 2012

delete this!