Vsftpd
From DD-WRT Wiki
Revision as of 18:16, 18 December 2006 (edit) Trey504 (Talk | contribs) (→Config File) ← Previous diff |
Revision as of 18:17, 18 December 2006 (edit) (undo) Trey504 (Talk | contribs) (→Config File) Next diff → |
||
Line 35: | Line 35: | ||
For anon login use the following in your vsftpd.conf file. | For anon login use the following in your vsftpd.conf file. | ||
Before you use this realize you will be giving anon login FULL ACCESS | Before you use this realize you will be giving anon login FULL ACCESS | ||
+ | |||
+ | Use vi /mmc/jffs/etc/vsftpd.conf to open file | ||
anon_mkdir_write_enable=YES | anon_mkdir_write_enable=YES |
Revision as of 18:17, 18 December 2006
by Helmutoh
Contents |
Requirements
First be sure that you have enough memory free. Because of this I describe the installation on SD-cards (/mmc). For sure you can also use your SMBshare-dir. Additionally this procedure will show how to install even the needed ipkg packages on the SD-card.
Preparation
For ipkg we will need the following directories on the SD-Card:
mkdir /mmc/jffs mkdir /mmc/jffs/tmp mkdir /mmc/jffs/tmp/ipkg
Installing vsftpd
Installation of vsftpd-Server from downloads.openwrt.org
ipkg -d /mmc/jffs install http://URL_2_vsftpd
Please ensure using the correct URL to the vsftpd-package. Ignore the warnings during ipkg-installation.
Installing uclibc
Because of not running with the standard-libs of DD-WRT we will install uclibc for use with vsftpd:
ipkg -d /mmc/jffs install http://URL_2_uclibc
Unsure the correct URL to uclibc again!
Config File
For anon login use the following in your vsftpd.conf file. Before you use this realize you will be giving anon login FULL ACCESS
Use vi /mmc/jffs/etc/vsftpd.conf to open file
anon_mkdir_write_enable=YES anon_upload_enable=YES no_anon_password=YES anon_world_readable_only=NO # leave this as / needs to be nonwritable anon_root=/ # you might have to make this dir secure_chroot_dir=/jffs/var/run/vsftpd ftp_username=root nopriv_user=root background=YES listen=YES anonymous_enable=YES local_enable=YES write_enable=YES local_umask=022 check_shell=NO dirmessage_enable=YES ftpd_banner=ROUTER
Start script for vsftpd
The following script starts vsftpd using the libuclibc:
export LD_PRELOAD='/mmc/jffs/lib/libuClibc-0.9.27.so' /mmc/jffs/usr/sbin/vsftpd /mmc/jffs/etc/vsftpd.conf unset LD_PRELOAD env > /dev/null
In second line the server ist startet using it's config file. Please refer to the vsftpd manpage learning more about this.
Save the script in your router (here: /mmc/progs/ftpserver/start).
Changes to startup section
Please be sure the ftp-server is working properly before changing the startup for the router.
Go to Administration - Diagnostics in the routers config and add the following lines to the startup section
cd /mmc/progs/ftpserver ./start
Firewall settings
To get the FTP-Server enabled from WAN side add the following line to the firewall section:
/usr/sbin/iptables -I INPUT 1 -p tcp --dport 21 -j logaccept