Vsftpd
From DD-WRT Wiki
Revision as of 18:58, 9 July 2006 (edit) BrainSlayer (Talk | contribs) m (Reverted edit of 201.78.56.136, changed back to last version by Helmutoh) ← Previous diff |
Revision as of 18:14, 18 December 2006 (edit) (undo) Trey504 (Talk | contribs) Next diff → |
||
Line 30: | Line 30: | ||
Unsure the correct URL to uclibc again! | Unsure the correct URL to uclibc again! | ||
+ | |||
+ | =Config File= | ||
+ | |||
+ | For anon login use the following: | ||
+ | |||
+ | anon_mkdir_write_enable=YES | ||
+ | anon_upload_enable=YES | ||
+ | no_anon_password=YES | ||
+ | anon_world_readable_only=NO | ||
+ | # leave this as / needs to be nonwritable | ||
+ | anon_root=/ | ||
+ | # you might have to make this dir | ||
+ | secure_chroot_dir=/jffs/var/run/vsftpd | ||
+ | ftp_username=root | ||
+ | nopriv_user=root | ||
+ | background=YES | ||
+ | listen=YES | ||
+ | anonymous_enable=YES | ||
+ | local_enable=YES | ||
+ | write_enable=YES | ||
+ | local_umask=022 | ||
+ | check_shell=NO | ||
+ | dirmessage_enable=YES | ||
+ | ftpd_banner=ROUTER | ||
=Start script for vsftpd= | =Start script for vsftpd= |
Revision as of 18:14, 18 December 2006
by Helmutoh
Contents |
Requirements
First be sure that you have enough memory free. Because of this I describe the installation on SD-cards (/mmc). For sure you can also use your SMBshare-dir. Additionally this procedure will show how to install even the needed ipkg packages on the SD-card.
Preparation
For ipkg we will need the following directories on the SD-Card:
mkdir /mmc/jffs mkdir /mmc/jffs/tmp mkdir /mmc/jffs/tmp/ipkg
Installing vsftpd
Installation of vsftpd-Server from downloads.openwrt.org
ipkg -d /mmc/jffs install http://URL_2_vsftpd
Please ensure using the correct URL to the vsftpd-package. Ignore the warnings during ipkg-installation.
Installing uclibc
Because of not running with the standard-libs of DD-WRT we will install uclibc for use with vsftpd:
ipkg -d /mmc/jffs install http://URL_2_uclibc
Unsure the correct URL to uclibc again!
Config File
For anon login use the following:
anon_mkdir_write_enable=YES anon_upload_enable=YES no_anon_password=YES anon_world_readable_only=NO # leave this as / needs to be nonwritable anon_root=/ # you might have to make this dir secure_chroot_dir=/jffs/var/run/vsftpd ftp_username=root nopriv_user=root background=YES listen=YES anonymous_enable=YES local_enable=YES write_enable=YES local_umask=022 check_shell=NO dirmessage_enable=YES ftpd_banner=ROUTER
Start script for vsftpd
The following script starts vsftpd using the libuclibc:
export LD_PRELOAD='/mmc/jffs/lib/libuClibc-0.9.27.so' /mmc/jffs/usr/sbin/vsftpd /mmc/jffs/etc/vsftpd.conf unset LD_PRELOAD env > /dev/null
In second line the server ist startet using it's config file. Please refer to the vsftpd manpage learning more about this.
Save the script in your router (here: /mmc/progs/ftpserver/start).
Changes to startup section
Please be sure the ftp-server is working properly before changing the startup for the router.
Go to Administration - Diagnostics in the routers config and add the following lines to the startup section
cd /mmc/progs/ftpserver ./start
Firewall settings
To get the FTP-Server enabled from WAN side add the following line to the firewall section:
/usr/sbin/iptables -I INPUT 1 -p tcp --dport 21 -j logaccept