Upgrade from openwrt

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 22:17, 20 January 2009 (edit)
Digid (Talk | contribs)
(How to upgrade/convert from openwrt to dd-wrt)
← Previous diff
Current revision (16:59, 30 April 2010) (edit) (undo)
Glenn (Talk | contribs)
(catspec)
 
(4 intermediate revisions not shown.)
Line 12: Line 12:
wget http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT54GS_v2/dd-wrt.v24_mini_generic.bin wget http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT54GS_v2/dd-wrt.v24_mini_generic.bin
-mtd -r write wrt.v24_mini_generic.bin linux+mtd -r write dd-wrt.v24_mini_generic.bin linux
Line 20: Line 20:
Digid Digid
 +
 +[[Category:Flashing networking hardware]]

Current revision

I had a linksys WRT54GS version 2 router that I wanted to upgrade from openwrt to dd-wrt. I could not find any documentation on how to do this. So I created this page just in case anyone else needed to do this.


Replace your firware image referenced below with the correct image for you router.


secure shell or telnet into the router running openwrt

cd /tmp

wget http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT54GS_v2/dd-wrt.v24_mini_generic.bin

mtd -r write dd-wrt.v24_mini_generic.bin linux


If all goes well your router will reboot, and when it comes up it will be running dd-wrt

I did a factory defaults after the reboot, I am not sure if it is needed or not.

Digid