USB storage
From DD-WRT Wiki
First, install the folowing modules :
ipkg install kmod-usb-uhci ipkg install kmod-usb-core ipkg install kmod-usb2 ipkg install kmod-usb-storage
A startup script must be made to do this every reboot.
For example :
> ~ # nvram set rc_startup=" > for I in `/bin/ls /jffs/etc/config/*.startup` > do > sh $I & > done > " > ~ # nvram commit
After doing this, make a file usb.startup in /jffs/etc/config/ directory that contains this :
#!/bin/sh insmod /jffs/lib/modules/2.4.30/usbcore.o insmod /jffs/lib/modules/2.4.30/ehci-hcd.o insmod /jffs/lib/modules/2.4.30/scsi_mod.o insmod /jffs/lib/modules/2.4.30/usb-storage.o insmod /jffs/lib/modules/2.4.30/uhci.o
This is it. Here's my dmesg from Asus WL-500gP
dmesg
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Enabling device 01:03.0 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x100, IRQ 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x120, IRQ 2
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected