USB storage

From DD-WRT Wiki

Revision as of 09:31, 7 June 2006 by VeNoM (Talk | contribs)
Jump to: navigation, search

First, install the folowing modules :

 ipkg install kmod-usb-uhci
ipkg install kmod-usb-core
ipkg install kmod-usb2
ipkg install kmod-usb-storage



A startup script must be made to do this every reboot.
For example :

 > ~ # nvram set rc_startup="
 > for I in `/bin/ls /jffs/etc/config/*.startup`
 > do
 >    sh $I &
 > done
 > "
 > ~ # nvram commit

After doing this, make a file usb.startup in /jffs/etc/config/ directory that contains this :

#!/bin/sh
insmod /jffs/lib/modules/2.4.30/usbcore.o
insmod /jffs/lib/modules/2.4.30/ehci-hcd.o
insmod /jffs/lib/modules/2.4.30/scsi_mod.o
insmod /jffs/lib/modules/2.4.30/usb-storage.o
insmod /jffs/lib/modules/2.4.30/uhci.o



This is it. Here's my dmesg from Asus WL-500gP

dmesg

SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Enabling device 01:03.0 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x100, IRQ 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x120, IRQ 2
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected