Talk:Wlan Repeater

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 10:38, 23 July 2007 (edit)
88.17.75.188 (Talk)
(New page: only work for me if mode set to repeater bridge, not repeater)
← Previous diff
Current revision (13:32, 27 July 2007) (edit) (undo)
BrainSlayer (Talk | contribs)
(BrainSlayer)
 
Line 1: Line 1:
only work for me if mode set to repeater bridge, not repeater only work for me if mode set to repeater bridge, not repeater
 +
 +== BrainSlayer ==
 +
 +the standard repeater, must be configured to use a different subnet on ap side. a repater is nothing else than a client and a ap on one device. so the lan ip address must be configured to a different subnet as the client is using.
 +
 +in repeater bridge this is not required for sure

Current revision

only work for me if mode set to repeater bridge, not repeater

[edit] BrainSlayer

the standard repeater, must be configured to use a different subnet on ap side. a repater is nothing else than a client and a ap on one device. so the lan ip address must be configured to a different subnet as the client is using.

in repeater bridge this is not required for sure