Talk:WDS Linked router network

From DD-WRT Wiki

Revision as of 01:00, 10 October 2006 by Newmind (Talk | contribs)
Jump to: navigation, search

This page should be editied to include the tutorial rather than just a link to it. I've seen much better tutorials (but not on this topic). Perhaps someone can do a re-write moddled after the Client Mode Wireless tutorial. This page should start by explaining what WDS is, the difference between Consumer Wireless Routers and Consumer Wireless Access Points, and how the WRT54G with DD-WRT kicks so much ass because it can combine both a Router AND an Access Point with the WDS feature. It should finish with the tutorial explaining how to setup WDS Links along with trouble shooting and specific firmware version issues.

I agree. I've rewritten the article. Please review it. I don't use WDS, except for having set it up once and taken it down. I also don't have any Airport products. If no comments come for 3 days I will rotate the new version in. --Duozmo 02:04, 30 Jan 2006 (CET)
Ok, I installed my revision. --Duozmo 10:17, 2 Feb 2006 (CET)


On the forum recently http://forum.bsr-clan.de/viewtopic.php?p=45022#45022, Brainslayer says that WDS only works with 802.11g clients. I'll try to put this in this Wiki soon. --Jgoldberg 23:00, 6 May 2006 (CEST)

It really seems like this page could use some more help yet. I'm really not clear on what this article is aboug: "WDS Bridging without Access Point function". I think a better explanation would be in place. AycheKay 18:23, 1 Oct 2006 (EDT)

Page says that WDS requires that you use channels 1,6 or 11. This does not seem accurate to me. I know these channels are non-overlaping but isn't that a question of spectrum usage design and not a "make or break" setting for WDS to work on DD-WRT. Can anyone confirm? --Newmind 03:00, 10 Oct 2006 (CEST)