Talk:Journalling Flash File System

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 20:16, 23 February 2006 (edit)
Atzekalle (Talk | contribs)
(Reverted spam)
← Previous diff
Revision as of 00:32, 14 March 2006 (edit) (undo)
Alceni (Talk | contribs)
m
Next diff →
Line 21: Line 21:
BrainSlayer BrainSlayer
 +
 +
 +---
 +
 +I installed the VoiP version on an Asus WL 500g DeLuxe, and I get this after following *both* your hints.
 +
 +df
 +Filesystem 1k-blocks Used Available Use% Mounted on
 +/dev/root 2880 2880 0 100% /
 +/dev/mtdblock/4 320 320 0 100% /jffs
 +
 +I am afraid this probably means I am really out of space (the jffs dir only has an empty tmp subdir). I'll go about installing a smaller version, enabling USB support, adding a USB drive and adding functionality if this is the way to go

Revision as of 00:32, 14 March 2006

That doesn't work for me... I've set these settings in the Webfrontend, the device rebooted, and that is what I get on the console...

BusyBox v1.00 (2005.05.10-21:26+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.

~ # mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
~ # df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 2624 2624 0 100% /

enable jffs
enable clean jffs
save settings

if this wont work, use the basic version. prefinal5 should also work with jffs support on G models, but prefinal4 has simply not enough flash space left

BrainSlayer


---

I installed the VoiP version on an Asus WL 500g DeLuxe, and I get this after following *both* your hints.

df Filesystem 1k-blocks Used Available Use% Mounted on /dev/root 2880 2880 0 100% / /dev/mtdblock/4 320 320 0 100% /jffs

I am afraid this probably means I am really out of space (the jffs dir only has an empty tmp subdir). I'll go about installing a smaller version, enabling USB support, adding a USB drive and adding functionality if this is the way to go