Talk:Journalling Flash File System

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 00:35, 14 March 2006 (edit)
Alceni (Talk | contribs)

← Previous diff
Revision as of 01:03, 14 March 2006 (edit) (undo)
Alceni (Talk | contribs)

Next diff →
Line 23: Line 23:
BrainSlayer BrainSlayer
- 
- 
----  
- 
-I installed the VoiP version on an Asus WL 500g DeLuxe, and I get this after following *both* your hints.  
- 
-df 
-Filesystem 1k-blocks Used Available Use% Mounted on 
-/dev/root 2880 2880 0 100% / 
-/dev/mtdblock/4 320 320 0 100% /jffs 
- 
-I am afraid this probably means I am really out of space (the jffs dir only has an empty tmp subdir). I'll go about installing a smaller version, enabling USB support, adding a USB drive and adding functionality if this is the way to go 
- 
-PS BrainSlayer, just as a means of verifying the installation, would it be usefull to give an ls -lR of a succesfull installation? My router functions ok, both the empty /jffs/tmp worries me. 
-Alceni 

Revision as of 01:03, 14 March 2006

That doesn't work for me... I've set these settings in the Webfrontend, the device rebooted, and that is what I get on the console...

BusyBox v1.00 (2005.05.10-21:26+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.

~ # mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
~ # df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 2624 2624 0 100% /

---

enable jffs
enable clean jffs
save settings

if this wont work, use the basic version. prefinal5 should also work with jffs support on G models, but prefinal4 has simply not enough flash space left

BrainSlayer