Talk:Client Bridged
From DD-WRT Wiki
(Difference between revisions)
Revision as of 08:08, 16 December 2009 (edit) Kennygno (Talk | contribs) (Does Client bridging work with v24 or not?) ← Previous diff |
Current revision (23:20, 18 July 2010) (edit) (undo) San Aequitas (Talk | contribs) |
||
Line 9: | Line 9: | ||
3 V24 builds<br> | 3 V24 builds<br> | ||
Confirmed working on V24-Final V24-SP1 V24 Pre-SP2 | Confirmed working on V24-Final V24-SP1 V24 Pre-SP2 | ||
+ | |||
+ | =========================================================== | ||
+ | |||
+ | Ok, well just wanted to throw in a few points on this article. | ||
+ | |||
+ | Under Former Wiki material: | ||
+ | |||
+ | - host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues. | ||
+ | |||
+ | |||
+ | Under V24 Builds, in the setup as explained by redhawk: | ||
+ | |||
+ | - I can confirm it works with v24-sp2 (07/22/09) micro. | ||
+ | |||
+ | - Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet. | ||
+ | |||
+ | |||
+ | = San Aequitas, 18JUL2010 |
Current revision
Three statements which one is true?
1 New Wiki Material-Client Bridge
First of all, do not even try to do client bridge with dd-wrt SP1. It won't work.
2 Former Wiki Material
Client Bridge is said to be working with the old V23 SP2 build...but not the newest V24 builds.
3 V24 builds
Confirmed working on V24-Final V24-SP1 V24 Pre-SP2
[edit] ===============================================
Ok, well just wanted to throw in a few points on this article.
Under Former Wiki material:
- host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues.
Under V24 Builds, in the setup as explained by redhawk:
- I can confirm it works with v24-sp2 (07/22/09) micro.
- Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet.
= San Aequitas, 18JUL2010