TP Link Archer C9

From DD-WRT Wiki

Revision as of 03:14, 25 February 2018 by Ian5142 (Talk | contribs)
Jump to: navigation, search

Contents


How to install DD-WRT

TP-Link Archer C9 v1

  • Ensure you have latest firmware from TP-Link
  • Download factory-to-ddwrt.bin from the tplink_archer-c9v1 directory from one of the links here.
  • Read New Build and model-specific threads to determine the stability of a given build.
  • Upload the dd-wrt firmware using the standard TP-Link UI and wait until router reboots
  • 30/30/30 hard reset


TP-Link Archer C9 v2

  • Ensure you have the latest firmware from TP-Link (tested with Archer C9(UN)_V2_160517)
  • Download factory-to-ddwrt.bin from the tplink_archer-c9v2 directory from one of the links here.
  • Read New Build and model-specific threads to determine the stability of a given build.
  • Upload the dd-wrt firmware using the standard TP-Link UI and wait until router reboots
  • Download the last appropriate dd-wrt firmware here
  • Upload the latest good webflash.bin build using the dd-wrt GUI found under Administration->Firmware Upgrade
  • DD-WRT v3.0-r30385 std (08/12/16)) has been tested stable

Troubleshooting

Device Forum Thread: https://dd-wrt.com/phpBB2/viewtopic.php?t=282831

Bricked Router

Symptoms: all the LEDs are ON, and you can't access to UI

Follow these steps:

  • Switch off the router
  • Download a complete binary-image of firmware
  • Rename the downloaded firmware with the following name: archerc9v1_tp_recovery.bin or "archerc9v2_tp_recovery.bin" if you have a v2 router
  • Serve as TFTP server the renamed firmware on the following IP: 192.168.0.66
  • Switch on the router, holding the RESET button for 2-4 seconds
  • The firmware will be automatically downloaded and installed by the router


Symptoms: after the dd-wrt installation the MACs are changed!