TP Link Archer C9

From DD-WRT Wiki

Revision as of 10:20, 6 April 2016 by 24mu13 (Talk | contribs)
Jump to: navigation, search

Contents


How to install dd-wrt 3.0 (beta)

This procedure is tested only using latest beta of dd-wrt 3.0 and TP-Link Archer C9 v1


Follow these steps:

  • Ensure you have latest firmware from TP-Link
  • Upload the (beta) firmware for factory to dd-wrt usage
  • 30/30/30 reset


Troubleshooting

Bricked Router

Symptoms: all the LEDs are ON, and you can't access to UI

Follow these steps:

  • Switch off the router
  • Download a complete binary-image of firmware
  • Rename the downloaded firmware with the following name: archerc9v1_tp_recovery.bin
  • Serve as TFTP server the renamed firmware on the following IP: 192.168.0.66
  • Switch on the router, holding the RESET button for 2-4 seconds
  • The firmware will be automatically downloaded by the router