TP Link Archer C9
From DD-WRT Wiki
Contents |
How to install dd-wrt 3.0 (beta)
This procedure is tested only using latest beta of dd-wrt 3.0 and TP-Link Archer C9 v1
Follow these steps:
- Ensure you have latest firmware from TP-Link
- 30/30/30 reset
- Upload the (beta) firmware for factory to dd-wrt usage
- 30/30/30 reset
Troubleshooting
Bricked Router
Symptoms: all the LEDs are ON, and you can't access to UI
Follow these steps:
- Switch off the router
- Download a complete binary-image of firmware
- Rename the downloaded firmware with the following name: archerc9v1_tp_recovery.bin
- Serve as TFTP server the renamed firmware on the following IP: 192.168.0.66
- Switch on the router, holding the RESET button for 2-4 seconds
- The firmware will be automatically downloaded by the router