TP Link Archer C9

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 13:46, 11 April 2016 (edit)
24mu13 (Talk | contribs)

← Previous diff
Revision as of 14:19, 12 April 2016 (edit) (undo)
24mu13 (Talk | contribs)

Next diff →
Line 5: Line 5:
{{note|This procedure is tested only using latest '''beta''' of dd-wrt 3.0 and TP-Link Archer C9 v1. {{note|This procedure is tested only using latest '''beta''' of dd-wrt 3.0 and TP-Link Archer C9 v1.
-With the version 04-05-2016-r29409 I noticed a quite stable behavior.}}+Using version 04-05-2016-r29409 I noticed a quite stable behavior.}}
Follow these steps: Follow these steps:

Revision as of 14:19, 12 April 2016

Contents


How to install dd-wrt 3.0 (beta)

This procedure is tested only using latest beta of dd-wrt 3.0 and TP-Link Archer C9 v1.

Using version 04-05-2016-r29409 I noticed a quite stable behavior.


Follow these steps:

  • Ensure you have latest firmware from TP-Link
  • Download the last appropriate dd-wrt firmware here, named factory-to-ddwrt.bin
  • Upload the dd-wrt firmware using the standard TP-Link UI
  • 30/30/30 reset


Troubleshooting

Bricked Router

Symptoms: all the LEDs are ON, and you can't access to UI

Follow these steps:

  • Switch off the router
  • Download a complete binary-image of firmware
    • From the official page OR
    • From the dd-wrt beta downloads (not tested)
  • Rename the downloaded firmware with the following name: archerc9v1_tp_recovery.bin
  • Serve as TFTP server the renamed firmware on the following IP: 192.168.0.66
  • Switch on the router, holding the RESET button for 2-4 seconds
  • The firmware will be automatically downloaded and installed by the router