TP Link Archer C9
From DD-WRT Wiki
(Difference between revisions)
Revision as of 09:40, 6 April 2016 (edit) 24mu13 (Talk | contribs) (New page: =How to install dd-wrt 3.0= {{note|This procedure is tested only using latest beta of dd-wrt 3.0 and TP-Link Archer C9 v1}} =Troubleshooting= ==Bricked Router== '''Symptoms''': all the...) ← Previous diff |
Revision as of 10:15, 6 April 2016 (edit) (undo) 24mu13 (Talk | contribs) Next diff → |
||
Line 1: | Line 1: | ||
+ | __TOC__ | ||
+ | |||
=How to install dd-wrt 3.0= | =How to install dd-wrt 3.0= | ||
Revision as of 10:15, 6 April 2016
Contents |
How to install dd-wrt 3.0
This procedure is tested only using latest beta of dd-wrt 3.0 and TP-Link Archer C9 v1
Troubleshooting
Bricked Router
Symptoms: all the LEDs are ON, and you can't access to UI
Follow these steps:
- Switch off the router
- Download a complete binary-image of firmware
- Rename the downloaded firmware with the following name: archerc9v1_tp_recovery.bin
- Serve as TFTP server the renamed firmware on the following IP: 192.168.0.66
- Switch on the router, holding the RESET button for 2-4 seconds
- The firmware will be automatically downloaded by the router