TP Link Archer C7
From DD-WRT Wiki
(Difference between revisions)
Revision as of 20:42, 3 December 2017 (edit) Tmittelstaedt (Talk | contribs) (→Installing DD-WRT on TP-Link Archer C7 V2 (AC1750)) ← Previous diff |
Revision as of 20:44, 3 December 2017 (edit) (undo) Tmittelstaedt (Talk | contribs) (→Installing DD-WRT on TP-Link Archer C7 V2 (AC1750)) Next diff → |
||
Line 13: | Line 13: | ||
Most of this info is from this post [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=176560&postdays=0&postorder=asc&start=0] | Most of this info is from this post [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=176560&postdays=0&postorder=asc&start=0] | ||
+ | |||
+ | A reversion file to go back to factory firmware is in this thread [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=85237&postdays=0&postorder=asc&start=0] | ||
Dd-wrt does not support the 5ghz card on the archer c7 hardware version v1.1. For old versions of dd-wrt after installing dd-wrt you must turn off the router and remove the 5ghz card or the router will brick. The 5Ghz radio works fine in hardware version 2 of this router. It is possible to remove the 5Ghz card from an old broken laptop and install it in the hardware version 1 of this device. | Dd-wrt does not support the 5ghz card on the archer c7 hardware version v1.1. For old versions of dd-wrt after installing dd-wrt you must turn off the router and remove the 5ghz card or the router will brick. The 5Ghz radio works fine in hardware version 2 of this router. It is possible to remove the 5Ghz card from an old broken laptop and install it in the hardware version 1 of this device. | ||
Build 33772 from here [https://www.dd-wrt.com/site/support/other-downloads?path=betas%2F2017%2F11-16-2017-r33772%2Ftplink_archer-c7-v2%2F] works fine on this router. | Build 33772 from here [https://www.dd-wrt.com/site/support/other-downloads?path=betas%2F2017%2F11-16-2017-r33772%2Ftplink_archer-c7-v2%2F] works fine on this router. |
Revision as of 20:44, 3 December 2017
Installing DD-WRT on TP-Link Archer C7 V2 (AC1750)
- WAP IP: 192.168.0.1
- Upgrade from TP-Link Archer_C7_V2_131217 firmware to Archer_C7_V2_150427 firmware.
- Archer_C7_V2_131217 gives "Error code: -1" trying to load any DD-WRT firmware. Make sure to upgrade to TP link 150427 first
- 30/30/30 Reset
- 2015-03-05-r26446
- WAP IP: 192.168.1.1
- 30/30/30 Reset
- WAP IP: Assigned desired IP and configure...
Most of this info is from this post [1]
A reversion file to go back to factory firmware is in this thread [2]
Dd-wrt does not support the 5ghz card on the archer c7 hardware version v1.1. For old versions of dd-wrt after installing dd-wrt you must turn off the router and remove the 5ghz card or the router will brick. The 5Ghz radio works fine in hardware version 2 of this router. It is possible to remove the 5Ghz card from an old broken laptop and install it in the hardware version 1 of this device.
Build 33772 from here [3] works fine on this router.