TP-LINK TL-WR841ND

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:11, 24 January 2011 (edit)
Simon94 (Talk | contribs)
(Hacking)
← Previous diff
Revision as of 23:14, 24 January 2011 (edit) (undo)
Simon94 (Talk | contribs)

Next diff →
Line 8: Line 8:
=Hacking= =Hacking=
 +==Serial Port==
 +In the pictures above there are schematics for soldering an Serial port.
 +The serial runs at 115200 8N1.
 +
It should be possible to solder an USB 2.0 Port and a MMC card via GPIO. Everything WIP! It should be possible to solder an USB 2.0 Port and a MMC card via GPIO. Everything WIP!
The latest DD-WRT Build works on the first look, but the wifi client mode is broken. There isn´t support for MMC and USB, too, so i recommend to use Open-WRT for hacking that board! The latest DD-WRT Build works on the first look, but the wifi client mode is broken. There isn´t support for MMC and USB, too, so i recommend to use Open-WRT for hacking that board!

Revision as of 23:14, 24 January 2011

Contents

Hardware

V7.1

  • Atheros AR7241 @ 400Mhz
  • Atheros AR9287 wifi circuit
  • Spansion FL032PIF 32Mbit (4Mb) Flash
  • Zentel A3S56D40FTP -G5 (32Mb) Ram

Image:Tlwr841nvers71serial.png

Hacking

Serial Port

In the pictures above there are schematics for soldering an Serial port. The serial runs at 115200 8N1.

It should be possible to solder an USB 2.0 Port and a MMC card via GPIO. Everything WIP!


The latest DD-WRT Build works on the first look, but the wifi client mode is broken. There isn´t support for MMC and USB, too, so i recommend to use Open-WRT for hacking that board!