Search results

From DD-WRT Wiki

You searched for Hardware/pl

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below 399 results starting with #21.


View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...[[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Replacing the green LEDs =
    8: '''Today we learn how to replace the green LEDs of your LaFonera with blue ones...
  2. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...ffektivste Weg um das Logo zu entfernen, ohne die Plastikoberfläche Deiner LaFonera zu beschädigen o...
    24: ...en der Politur mit einem feuchten Tuch, damit das Plastik nicht angegriffen wird
  3. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
    23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''...
  4. LaFonera Hardware (de) (46 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]]
  5. LaFonera Hardware (fr) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]'''
  6. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    19: ==Removing and replacing ram chips on the Fonera==
    23: ... keep the chip on when a little bit of force is applied to the chip. The legs will 'pop' from the pads...
    25: Get a sample ChipQuik SMD removal kit. It includes flux and s...
  7. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...onera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    12: I think it is very simple to do this modification - if you have some solde...
    28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
  8. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...onera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Remplacer les LEDs vertes =
    8: '''Aujourd'hui nous allons voir comment remplacer les LEDs vertes de LaFonera par des bleues.''...
  9. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...hat limited by its power supply which needs to be plugged into a wall power socket. Wouldn’t it be n...
    8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe...
    10: This mod is quite simple; it requires no modification to the LaFonera, ju...
  10. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    8: This is '''SIMPLE''' mod. It shouldn't take you more then 2 Hours ...
  11. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    9: ...the time to make a schmatic of the LaFonera yet? Please fill in the
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
    15: ... Reset TAP in Atheros AR2315 (from: Multiple sources)
  12. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  13. Hardware-Specific/zh cn (32 bytes)
  14. Hardware-specific/zh cn (32 bytes)
  15. LaFonera hardware New Paint Job (45 bytes)
    1: #REDIRECT [[LaFonera Hardware New Paint Job]]
  16. LaFonera Hardware (en) (49 bytes)
    1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]'''
  17. LaFonera Hardware IO (39 bytes)
    1: #REDIRECT [[LaFonera Hardware IO (en)]]
  18. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
    40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
    46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in...
  19. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    5: [[Image:Fonera_card_reader_complete-top.jpg|thumb|center|658px|Fonera with a blue ...
    10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
    13: ...ng Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
    16: ...fe/Utility knife with a blade sutable for cutting plastic.
  20. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: ...e because of playing with IR receiver. So why not playing with serial 128*128 LCD ?
    14: ...nd animations. The uLCD model can only display simple stuff (line, cercle, text) and pixel after pixel...
  21. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...er, a diode, a resistor and a78L05 regulator as explained here. But this wont work with USB/serial ada...
    10: ... used with USB/serial and embedded system with simple serial port like… La Fonera.
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  22. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...egory:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    6: = LaFonera Plus =
    7: There is a new Fon router : La fonera+ (plus). This router is quite similar than the classic...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
  23. Hardware-specific (5,910 bytes)
    1: {{Languages|Hardware-specific}}
    3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
    7: =Hardware Brand=
    49: *[[Linksys Serial numbers|Identifying Hardware Versions]]
    130: *[[Cisco Valet Plus M20]]
  24. OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
    1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
    2: ...are "like" vpn access for multiple computers or appliances)
    6: ...nt side to more than one client, device, and or appliance that does NOT have built in VPN capabilities...
    8: '''Examples Include:'''
    24: # Port 8080 will be used in this example, change this if you like.
  25. Hardware DIY/ru (33 bytes)
  26. Hardware DIY/zh cn (541 bytes)
    1: {{Languages|Hardware_DIY}}
    11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]]
  27. Hardware/ru (2,765 bytes)
    1: {{Languages|Hardware}}
    51: [[Category:Hardware/ru| ]]
  28. Hardware-specific/fr (567 bytes)
    1: {{Languages|Hardware-specific}}
    4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''

Page text matches

  1. ¿Qué es DD-WRT? (4,318 bytes)
    3: ...firmware libre bajo los términos de la licencia GPL para la mayoría de los router 802.11g basados en...
    9: La nueva versión de DD-WRT (v23) ''es completamente un nuevo proyecto''. DD-WRT ofrece numero...
    13: ...ados, y soporte software para la modificación de hardware SD-Card.<br>
    30: ...ossary#Client Mode|Modo Cliente]] (soporta muúltiples conexiones de clientes)
    39: ...Card|MMC/SD Card Support]] (requiere modificar el hardware)
  2. Kismet on Linux (4,875 bytes)
    25: The /tmp directory is the only place on the wrt which is writable as it is stored o...
    48: ...ld be different if running another version of the hardware - this works with v2.2 of the wrt54g).
    63: If this works, it will display some messages ending with 'Allowing connections...
    91: logtemplate=%n-%d-%i.%l
    93: logtemplate=%h/%n-%d-%i.%l
  3. Wrt54g kismet with linux server (9,309 bytes)
    6: ...d itself. The client is the user interface to display the results on your screen. The server is the ...
    12: ...s reported to the user via the client will not display the correct signal strength.
    42: The /tmp directory is the only place on the wrt's file system which is writable as ...
    56: ...drone and kismet_drone.conf files the the correct place, delete the unwanted files and then make the d...
    94: ... machine at a time to connect to the drone and display the results.)
  4. Linksys WRT610N (11,615 bytes)
    2: ... was a top-of-the-line consumer Linksys device (replaced by the [[Linksys E3000|E3000]]) with the foll...
    10: ...or Broadcom devices. It's responsible for initial hardware configuration and subsequent booting of the (Linu...
    26: ... time on your WRT610N, you need to use a trailed (hardware-specific) build:
    29: ...s://download1.dd-wrt.com/dd-wrtv2/downloads/'' in place of ''ftp://ftp.dd-wrt.com/''
    36: For example, these are 2.4 kernel builds, only for v1 router...
  5. Feature requests (17,201 bytes)
    19: ...Content filtering features. (And make it plug and play. Too many linux distributions require the user ...
    25: ...mes" in order to save space, and allow people to upload news ones to the jffs parition as needed.
    29: ...easily added further downstream, whereas the best place to put VoIP and VPN functions is at the "upper...
    31: ...verse proxy (or similar capability) to allow multiple servers behind the router to share a single IP. ...
    37: * Allow the router to replace AirPcap: Wireless Packet Capture for Wireshark...
  6. Wiederbeleben (2,917 bytes)
    15: ...R am Port 1 per TFTP geflasht werden. Bei einigen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
    81: [[Category:Flashing networking hardware/de]]
  7. Wiki discussion (5,344 bytes)
    4: ...slation and optimisation of Russian part of Wiki, please, link to that new version [[DD-WRT_(RU)]] fro...
    7: ...ir models from the current main page. The various hardware specific guides can be found via the Miscellaneou...
    21: ...d is [[Glossary:free software|free]] under the [[GPL]].
    27: ...s a long one. Is that OK? Do we need a brief explanation and a more detailed one?
    33: ...to tell if it's bricked, all the common little complaints etc. But this is almost too large for an FA...
  8. Espanol (5,507 bytes)
    1: {{Template:Bienvenido}}
    18: ...uración]]''' <br/>Las tareas de configuración explicadas
    106: ...ar!#Suministrando Hardware o Dinero|Suministrando Hardware o Dinero]]
  9. USB storage (55,588 bytes)
    9: ...then I looked at this guide. It is excessively complex and antiquated in many areas for current versio...
    13: ...ready formatted in exFAT and already successfully plugged in and used on a Windows 7 device.
    15: Plug the drive into the available USB port.<br>
    16: ...the contents the same as you would with Windows Explorer. Reboot if necessary.
    26: == Applications ==
  10. Wake-on-LAN (tutorial) (10,143 bytes)
    4: ...his (especially the latter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers hav...
    14: ...atic_DHCP#Configuration|static DHCP]]. In the example below, we assume your router LAN is 192.168.1.x ...
    15: ...T device's Web Interface to send test packets, in place of a second PC.
    38: * A good place to start is here: [http://www.smallnetbuilder....
    47: ...the full path to "/usr/sbin/wol" is important. Simply "wol" will not work.
  11. DD-WRT Docu (FR) (22,239 bytes)
    3: {{Template:Bienvenue}}
    8: ... une documentation technique et d'installation complète pour le firmware [http://www.dd-wrt.com/ DD-W...
    13: ...c], lequel a été construit sur la distribution GPL originale de Linksys et sur d'autres projets open...
    14: ==Liste complète des fonctionnalités==
    23: ...de client (Support de connexion pour clients multiples)
  12. Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
    17: ...e added Buffalo header. After successful transfer please wait 2-3 min., or until router reboots.
    56: WLA-G54C hardware versions:
    67: ... Reset-button, let it enter troubleshoot mode (couple minutes), then power off second time, and power ...
    75: ...ys, ch.6, no encryption). Once you are connected, please telnet to the router and erase nvram (usernam...
    77: '''Please note:''' Clearing nvram will also change the ...
  13. DD-WRT Docu (IT) (14,289 bytes)
    5: ...bile che siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifi...
    16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
    27: *Client Mode (supporta client multipli)
    57: *il supporto al WRT54G v.5 è stato implementato come da [http://www.bitsum.com/openwiking...
    143: ...er alcuni esempi di scripting guarda [[Script Examples]]
  14. VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
    11: ...ess which will be your private one wl0. You can apply WPA to this in the usual way. Then set up your f...
    13: ... 1 on the screen as this corresponds to port 4 in hardware.
    14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re...
    15: * GL hardware: http://garycourt.com/wp-content/images/WRT54_sw2...
    58: ...ve not implemented bandwidth shaping nor Hotspot splash page, but it's a start.
  15. TP Link Archer A7v5 (7,003 bytes)
    1: ==HARDWARE==
    9: This is the placeholder for the A7v5.
    10: This is a work in progress by MSOENGINEER, so please be patient while he adds to this device wiki....
    12: ...router with Q.o.S. turned on is only good for ISP plans up to 150mbps. YOU'VE BEEN WARNED.
    14: ...ster, go back to stock which uses other dedicated hardware inside the A7v5 to improve network translation wh...
  16. Återställ från en dålig flash (907 bytes)
    10: [[Category:Flashing networking hardware/se]]
  17. Debugging PPPOE Problems (2,511 bytes)
    29: === Uplink ===
    59: line should display a session number and the hardware address
    62: If your uplink does not work properly or your DSL modem
  18. Useful Scripts (54,380 bytes)
    9: ...hould be considered a hack until the feature is implemented permanently.
    25: ...if you're receiving segmentation faults or your applications are failing to run, and even then only if...
    27: ...e above mentioned way of altering things is to simply copy /etc/profile to /jffs/etc, change PATH and ...
    50: Credit to hardwarewizard and frater
    106: # example command lines
  19. Recover from a bad flash/it (583 bytes)
    12: [[Category:Flashing networking hardware/it]]
  20. Switched Ports (23,473 bytes)
    1: ...*NOTE**:&nbsp;</span> <font color=red>This Wiki applies to DD-WRT versions prior to r46604 on Broadcom...
    6: This page explains proper command line configuration of VLANs on...
    19: ...sical or virtual wireless interfaces using [[Multiple WLANs]].
    48: ==Explaining the connection between Hardware, VLANs, and NVRAM Variables==
    52: ===Visible Hardware, Internal Ports, and VLANs===
  21. Afterburner (1,547 bytes)
    3: ... available on all DD-WRT enabled G routers. It is hardware independent. Afterburner will only improve speeds...
    16: * G Plus
    28: ...www.wi-fiplanet.com/news/article.php/3330731 wi-fiplanet.com
    31: [[Category:Applications]]
  22. USRobotics USR5461 (11,735 bytes)
    5: The major hardware features of USR5461 router are listed in this tab...
    7: ... not recognized by DD-WRT firmware. Therefore, in place of the so-called "30/30/30 Reset" which requir...
    12: ...ilds (file size about 1700 KB) or DD-WRT '''micro-plus''' builds (file size less than 1870 KB) for ins...
    18: Note: In the example bellow we will use Brain Slayer's 13525 build: <...
    27: Please, read and understand all instructions in this...
  23. LaFonera Hardware serial to ethernet (1,034 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet'''
  24. Motorola WR850G (8,284 bytes)
    3: The Motorola WR850G is based on very similar hardware to the Linksys WRT54G except that it stores the M...
    5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
    7: ...n though DD-WRT v23 SP1 and later knows about the hardware it is being installed on, you risk bricking the r...
    9: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    23: ...e from *ATTENTION - These links are out of date. Please go to the main index, choose downloads, and s...
  25. DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
    16: ...r Funktion her ähnlich wie das BIOS in einem PC: Hardwareinitialisierung, interaktive Einstellungen, Betrie...
    59: Es gibt keinen GPL-Quell-Code für die Version 4.03. Überprüfe 5.1...
    116: ==Hardware==
    214: ...feld und <b>nicht Enter drücken</b> - click <b>APPLY</b> stattdessen!<br>
    226: Nun kommen wir zum kompliziertem Teil: benutzen Sie die <b>WAN-Nummer für...
  26. WR850G v1 (26,232 bytes)
    5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
    12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
    15: ...n't understand what the commands below are doing, please check with a good Linux/Unix textbook first,
    18: ... windows, or make your boss angry etc. You are completely on your own!
    24: I don't understand yet, hopefully the GPL source of fw 5.13 will give me some clues: all by...
  27. Airodump and using/overriding libraries (6,898 bytes)
    1: ...rienced odd errors. In this example, we will be exploring Airodump, a part of the AirCrack package, wh...
    16: wget http://downloads.openwrt.org/people/nbd/ar7/packages/aircrack_2.41-1_mipsel.ipk
    23: ==Will Aireplay work?==
    24: ...ost it! If anyone has any info or wishes to help, please let me know!
    27: ...n error, then you're good to go! However, many people will get an error such as this:
  28. Spanning Tree Protocol (29,361 bytes)
    7: ...bled repeaters, or in an ad hoc network with multiple ad hoc connections.
    67: ...mittant and bugged me greatly, in that I could simply turn off Link3 and have no issues at all for mon...
    86: brctl comes with the following options I will explain in a moment
    194: ...lue containing the last active flag value (my example indicates a topology change has been detected)
    211: ...ercial hardware. Priority is one of the "needs to play nice" ones where the default 100 will make the ...
  29. Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
    3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13...
    159: *En el ejemplo el rango de ip que se dio para clientes vpn ("Cl...
  30. Factory Defaults (25,206 bytes)
    8: ''Merge needed with [[Hardware#NVRAM]].
    14: For example, let's say that Firmware A sets the imaginary va...
    27: ...s for it to not actually clear the NVRAM. Many people think of it and phrase it that way. What it is s...
    29: .... On some less-supported hardware this may have unpleasant results.
    32: ...y other avenue of unbricking should be tried multiple times before resorting to this.
  31. Installation (20,950 bytes)
    2: ... DD-WRT on a router in most cases is almost as simple as installing a program onto your computer. Howe...
    7: Please check the [https://dd-wrt.com/support/router-...
    11: For a list of devices working with DD-WRT, please see '''[[Supported Devices]]'''.
    13: ...r a list of devices '''not''' working with DD-WRT please see '''[[Known incompatible devices]]'''.
    15: ...Brick_%28electronics%29 Bricking] your router''', please finish reading this entire page first. You w...
  32. Netgear R9000 (8,270 bytes)
    2: '''NOTE: This wiki also applies to the R8900 and XR700'''<br>
    12: Please note, Wireless-AD (60GHz) support is untested...
    14: 10g interface - supported SFP hardware info: [https://forum.dd-wrt.com/phpBB2/viewtopic....
    17: =[https://wikidevi.wi-cat.ru/Netgear_R9000 Hardware Specifications]=
    72: # You will see a notice about the file you uploaded being older than the firmware currently on t...
  33. Accton (82 bytes)
    1: Please refer to [[Installation]] and [[Hardware-specific]] pages for further info.
  34. D-Link (234 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  35. Linksys WRT54G v2.2 (1,689 bytes)
    3: ==Hardware Specifications==
    16: #Click ''Upgrade'' then when complete, wait FIVE FULL minutes
    26: #Click ''Upgrade'' then when complete, wait FIVE FULL minutes
  36. USRobotics USR8200 (6,454 bytes)
    23: ...uses the telnet interface into the router to accomplish it's task. <br>
    52: ....). Use the MAC address at the bottom of the unit plus 3. The one printed on the bottom is for the WAN...
    58: *Plug your LAN cable into the WAN port.
    110: =Hardware=
    149: http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Hardware%282f%29USRobotics%282f%29USR8200.html#head-e0357e...
  37. Linksys WRT54G-TM (9,840 bytes)
    8: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware '''but not the firmware''' so the CORRECT FILES M...
    20: ...ller to speed up the process, otherwise once you upload the '''CFE_Updater-WRT54G-TM.bin''' you will n...
    36: ...able to tell when the router is ready for a TFTP upload.
    40: ...go to the Administration Tab - Firmware Upgrade. Upload the '''CFE_Updater-WRT54G-TM.bin''' to the rou...
    42: ... the Upgrade button to allow the CFE_Updater to replace the stock CFE on the router and for it to eras...
  38. Verizon FiOS - Using Your Own Router (6,751 bytes)
    1: ...torial should be able to help those who want to replace their Verizon-provided Actiontec router with o...
    9: ...Coax WAN and Ethernet WAN. This is pretty self-explanatory: coax means the TV type cable, ethernet me...
    17: ...f (in case someone gets tangled in it). '''Do not plug in the cable yet.'''
    20: ...n't have another means of accessing the Internet, please save yourself some trouble and save the page....
    26: #Power off the Actiontec, and plug the Ethernet cable into the Data port of the ON...
  39. LaFonera Hardware i2c (6,202 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
    10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
    12: My kernel implementation use 4 GPIO on SW1 (1-2-5-6) near the Et...
    16: ... on i2c-parport-light. Linux i2c stack is very complete, all i have to do is to use bit-banging i2c AP...
  40. What is DD-WRT? (20,620 bytes)
    3: ...mware|firmware]] released under the terms of the GPL for many Wi-Fi 4 and Wi-Fi 5 wireless routers bas...
    5: ... original [[wikipedia:GNU_General_Public_License|GPL]]'d Linksys firmware and a number of other open s...
    11: ... allocation, and software support for the SD-Card hardware modification.<br>
    13: The ''DD'' in DD-WRT is the German car numberplate code for Dresden.
    36: ! [[:Category:Applications|Serv-<br>ices]]
  41. Version Features (31,493 bytes)
    8: ... information about which versions can run on your hardware.
    17: | Micro Plus [[Version_Features#Notes|(2)]][[Version_Feature...
    18: | Micro Plus ssh [[Version_Features#Notes|(2)]][[Version_Fea...
    423: | [[NoCatSplash |NoCat]]
    554: | Micro Plus [[Version_Features#Notes|(2)]][[Version_Feature...
  42. WHR-HP-G54 (24,374 bytes)
    6: ... actually own or operate a WHR-HP-G54, and can completely test settings. Add any background informatio...
    8: * Please include - antenna type, environment (indoor, ...
    15: ... a file via web gui with a size of 3817472 Bytes. Please update this with the Maximum file size you ca...
    21: ... away than the [[WHR-G54S]] due to the on-board amplifier and BCMxxxxE/EL-series Broadcom 'BroadRange ...
    36: hardware watchpoint : no
  43. Hashes & Checksums (15,359 bytes)
    2: A hash (or checksum) is a simple type of redundancy check that is used to detect ...
    23: ...d installing a handy freeware app named [http://implbits.com/Products/HashTab.aspx HashTab].
    25: Once HashTab is installed, simply right-click on the downloaded firmware file, go ...
    30: ...Terminal. (It's in the Utilities folder inside Applications.) Type:
    237: ...e will be flashed and a checksum error will be displayed at the end, but the router will not reboot in...
  44. ¿Qué es "DD-WRT"? (11,698 bytes)
    7: ... su código fuente esta disponible bajo licencia GPL.
    10: ...c], que a su vez se basa en el firmware original GPL de Linksys y en otros proyectos. '''DD-WRT''' se ...
    24: *<b>Modo Cliente</b> (soporta m&uacute;ltiples clientes conectados)
    121: | [[NoCatSplash|NoCat]]
    251: ...er - que tiene que pagar los costes del servidor, Hardware y otras cosas.
  45. LaFonera Hardware Coloured Chassis (2,817 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
    15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
    26: From testing on spare plastic I have found that you can get a smooth finis...
    33: ...is to prime the surface. (no need to sand because plastic adheres better than metals);
  46. Vxworkskiller de (757 bytes)
    1: ...ven Firmware zu flashen ohne auf JTAG oder andere hardware modifikationen zurückzugreifen
  47. Instalación en el enrutador Motorola WR850G (7,207 bytes)
    1: El router Motorola WR850G esta basado en hardware muy similar al Linksys WRT54G, excepto que almace...
    4: ...ción sobre la version al reverso, esta basado en hardware levemente distinto, y (al menos con DD-WRT v23fin...
    6: ...omenzando con algunas versiones v23SP1, conoce el hardware (como detectarlo, que valores de fábrica estable...
    10: ...oceso de varios pasos para obtener la versión completa o un solo paso para el firmware "mini". '''Rec...
    12: ...e muchas de las funcionalidades de la versión completa y puede ser suficiente para la mayoria de los ...
  48. Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
    5: ...o con mi <code>v5</code>. Lo que aquí resumo, simplificando un poco.
    42: ...a instalar WRT54G G/GS v5-v6 sin modificación de hardware. (en inglés)
    49: ...a.org/wiki/JTAG Cable JTAG]. Este [http://forums.hardwarezone.com/showthread.php?p=18118180#post18118180 li...
    58: ...un Cable JTAG]) -- ([http://wiki.openwrt.org/doc/hardware/port.jtag.cables Como hacer un Cable JTAG]).''
    69: ...ebricker tool auto detectara el chip de flash. Explicitar los parametros del chip como '/fc:01' rara ...
  49. Netgear WNDR4500 (3,670 bytes)
    2: = Hardware Specs =
  50. 什么是 "DD-WRT"? (53,158 bytes)
    3: ...第三方[[wikipedia:Firmware|固件]],采用 GPL 协议,支持基于 Broadcom 或 Atheros 芯片...
    5: ...是基于 [[wikipedia:GNU_General_Public_License|GPL]] 的 Linksys固件及许多其它开源程序。...
    37: ! [[:Category:Applications|Serv-<br>ices]]
    125: ...Glossary#Client Mode|Client Mode]] (supports multiple connected clients)
    233: ..." | [[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required)
  51. Optware (46,421 bytes)
    7: Please note:
    20: ... all required files under /opt with 1000 ported applications. With buildroot toolchain, system library...
    21: ...packages, but still far smaller than glibc based aplications.
    29: ...package or optware-devel meta package provides complete development toolchain for compiling programs o...
    31: ...mended to unmount /jffs and then mount eg. mmc in place of /jffs.
  52. Quick list of Optware packages (104,401 bytes)
    11: * alac-decoder - 0.1.0-2 - A decoder for the apple lossless file format
    17: ...rver and client library for writing proxy-based applications.
    22: ... server technology for embedding in devices and applications. Supports embedded javascript, CGI, Virtu
    32: * asterisk-sounds - 1.2.1-1 - Supplementary asterisk-sounds.
    43: ...14-moh-freeplay-alaw - 0.0.0-1 - asterisk-moh-freeplay-alaw
  53. Development (20,697 bytes)
    17: ...distribution costs and better represent the multi-platform capabilities of this kit, the binary tools ...
    19: # A compatible platform. The following are specifically supported (...
    30: ..., installing the Mac OS X Developer Tools will supply the needed GNU C and C++ compilers and make util...
    68: I've written two scripts that simplify the process considerably. Basically, it's a on...
    76: Simply run extract_firmware.sh with the following param...
  54. 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
    28: ...e added Buffalo header. After successful transfer please wait 2-3 min., or until router reboots.
    69: ... Reset-button, let it enter troubleshoot mode (couple minutes), then power off second time, and power ...
    76: ...ys, ch.6, no encryption). Once you are connected, please telnet to the router and erase nvram (usernam...
    78: '''Please note:''' Clearing nvram will also change the ...
    91: Once the router runs DD-WRT, please use the generic version when upgrading firmwa...
  55. MN-700 (10,914 bytes)
    3: ...WRT, a new bootloader must be installed through a hardware hack (until someone comes up with a WinCE killer ...
    11: ...re wondering, the MN-500 has completely different hardware than the MN-700, so the instructions provided by ...
    14: ...SP2 and eariler are not supported on the MN-700. Please use build SVN 3953 (link below) or higher. Ea...
    18: # Follow one (or a combination) of the hardware hack guides listed in the Introduction section ab...
    20: # Put the WRT in hardware restoration mode (hold down the reset button whil...
  56. Contribute (3,059 bytes)
    6: ...t the development of DD-WRT and how you can help, please visit the [[:Category:Developer resources]] s...
    13: * You don't need to know HTML, Wiki is edited in plain text.
    14: ...ry fast and categories are auto-updatable. An example for a category can be found on the bottom of thi...
    21: ...ainSlayer]]&nbsp;— has to pay server costs, new hardware and, most importantly, food and shelter.
    34: The more people we have contributing to the project the better t...
  57. Firmware FAQ (40,468 bytes)
    36: ...d-wrt file names for first time flashing- where applicable in the folders).
    38: ... many many routers). Always go to the appropriate hardware device forum and look at the recent build reports...
    46: ...mware builds are beta releases with no or limited hardware testing. '''Proceed with caution!'''
    55: ...'. Always read the newest build thread first. Example: [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=...
    72: ...rks OEM fimware that have special procedures to replace the CFE (bootloader). '''To upgrade, use the g...
  58. Known incompatible devices (18,777 bytes)
    23: If you bricked your router, please first consult the [[Index:Support|support]] p...
    24: ...velopers confirm the incompatibility with DD-WRT, please edit this page.
    33: | '''Hardware<br>revision'''
    448: | KA2DI614-PLUS<br>(invalid FCC id)
    1122: ...132 CPU<br>4MB Flash/32MB RAM<br>U-Boot must be replaced
  59. Bountiful BWRG1000 (105 bytes)
    3: [[Category:Networking hardware tutorials]]
  60. Version 5 And 6 Router Information (5,963 bytes)
    1: ..., including the most relevant and valuable links. Please add information, including new links you find...
    19: For more complete information on hardware revisions, visit Wikipedia:<br/>
    20: http://en.wikipedia.org/wiki/Wrt54g#Hardware_revisions
    23: ...ons which can result in a freezed router". This applies to all neutered routers.
    40: ...connected to any network, even though you have it plugged into the neutered router.
  61. Reset And Reboot (4,732 bytes)
    11: ...g in the reset button is to leave a network cable plugged in to your computer and the router, then wat...
    16: .... On some less-supported hardware this may have unpleasant results, so use the following two reset met...
    17: ... reset, Admin tab, then factory defaults. Click apply and wait 5 min. The router is now reset and shou...
    21: ...d have unpleasant results "on some less-supported hardware".
  62. D-Link DIR-615 rev C (10,866 bytes)
    4: =Hardware=
    6: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    10: ==Pros of this hardware==
    13: * Fairly new hardware (released in 2009?), so it's widely available for...
    15: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo...
  63. Internal device network (4,651 bytes)
    1: ... internal network connects the internal physical(=hardware):
    8: Via the user interface you can modify how the hardware is logically interconnected with each other and w...
    16: ...es are limited by the software implementation and hardware.
    24: **Please note that the (above) (DD-WRT) [[firewall]] n...
    26: ...ll#Network-based_application_firewalls|proxying/application]]/[[wikipedia:Deep packet inspection|deep ...
  64. Miscellaneous/zh cn (971 bytes)
    6: ...efinitions and considerable explanations. A great place for reference and general browsing.
    10: There are some pages that describe specific hardware with only loose
    21: * [[Hardware#NVRAM|NVRAM]]
    23: * [[Hardware#Overclocking|路由器超频]]
    25: * [[Hardware#Hardware_Modifications|硬件改造]]
  65. LaFonera Hardware SD-Card (6,579 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
    46: I read on several websites, that some people managed to wire a SD Card (or a MMC) to a Fonera...
    50: [[Image:LaFonera_Hardware_SD-Card_-_01_overview.jpg|the finished result]]
    57: ... is to locate the SW pins (near the antenna).. simply solder some wires like this:
  66. LaFonera Hardware Power-Sources (2,124 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources'''
  67. Linksys WRT54G/GL/GS/GX (4,360 bytes)
    6: ...box or the underside of the router) represent the hardware revision:
    23: CDFG = WRT54G v8.0 (purchased 7-16-2007 Hemet Staples)<br>
    87: ...neric.bin file....or one of the micro_plus, micro_plus_ssh mentioned above.
    132: ...s greater than the CFE imposed maximum of 250mhz, please see [[http://www.bitsum.com/openwiking/owbase...
  68. Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
    3: ==Hardware==
    15: '''This flash method applies to EON, INTEL, and SAMSUNG(?) flash chips.'''<...
    25: # Unplug the router, then hold the reset button while re...
    62: ... I installed from the Linksys GUI Admin options, upload went about half way then tried to reboot, and ...
  69. Installation/ja (27,080 bytes)
    15: ...イスの場合、デバイス固有の情報が[[Hardware-specific]]ページで見つかるかもしれま...
    24: ...とはいえ、ピーコック スレッドと [[Hardware-specific|ハードウェア固有の情報]]ペ...
    26: ...クページの背景を知ったあとでは、[[Hardware-specific|ハードウェア固有の情報]]ペ...
    29: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
    30: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction...
  70. D-Link DIR-400 (5,069 bytes)
    5: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-400_A1 Hardware] Specifications==
    66: ...''' and press Enter. Wait until the process is complete:</li>
    76: ...ss Enter (this one will take a while. '''DO NOT UNPLUG YOUR ROUTER''')</li>
  71. Gateworks Avila/Cambria Installation (14,682 bytes)
    5: ...>Please note: The details in these instructions apply specifically to the GW2348-4 board.
    9: ...ies Network Processor boards provide an excellent platform for building high performance
    15: ...lling DD-WRT on the GW2348 board is relatively simple. To install the firmware you will need the foll...
    17: * DC power supply (12 to 24&nbsp;V, 1&nbsp;A)
    18: * Coaxial power plug (2.5&nbsp;mm x 5.5&nbsp;mm available from Radio...
  72. Linksys WAP54G Hardware Spec (3,039 bytes)
    5: Hardware spec:<br>
    20: While the howtos and photos needed for the implementation of this module for the models of WRT54G...
    36: Power supply:
    45: [http://downloads.openwrt.org/people/inh/reference/mmc.gif]
  73. Mikrotik Routerboard RB/532 (3,688 bytes)
    6: ...hput Ethernet and wireless based networks. Its simple and robust design ensures reliable non-stop oper...
    12: There are 2 versions of the Routerboard 532, the 'plain' 532, and the 532A. The key difference is tha...
    22: ''please note, this information was more or less copie...
    54: | IDT internal SoC hardware watchdog timer
    77: [[Category:Networking hardware tutorials]]
  74. Supported Devices (242,466 bytes)
    8: ...may actually be really bad builds for your router hardware and cause a lot of issues.
    12: ..."beta" FTP/HTTPS site to see if you can find your hardware.
    13: ...ee how they work for a particular piece of router hardware.
    14: ...quotes with the word AND (in uppercase) plus your hardware or issue to perform your search.
    21: ...ation-to-be-removed-in-firefox-90/ Built-in FTP implementation to be removed in Firefox 90]<br>
  75. AutoAP (11,662 bytes)
    65: ...tting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to prefer to connect to a cert...
    75: What follows is a complete list of included [[Hardware#NVRAM|NVRAM]] variables and what they do (with de...
    87: ...is appended directly, preceeded by a "*key*". Example: "My Home", WEP key:1234567ab -> "My*Home*key*12...
    89: :'''nvram set autoap_aplimit="10"'''
    97: ...e amount of time to wait for a DHCP renewal to complete. If the routers you're accessing are fairly qu...
  76. Linksys WRTSL54GS (13,481 bytes)
    2: ... are open for many different applications of this hardware.
  77. Micro-plus (26,693 bytes)
    4: ... micro version. There is also a version of Micro-plus with SSH support.
    8: ==Can my device run micro-plus?==
    11: ...ces which currently have the ability to run micro-plus must have a small CFE (bootloader) of 128K in s...
    14: ....bin''' is '''128K''', you can safely flash micro-plus and enjoy the benefits.
    15: #*DO NOT flash micro-plus if your cfe.bin is larger than 128K (most are a...
  78. LaFonera Info Hardware-Specifications (3,830 bytes)
    3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
    5: == The Hardware Specifications ==
    15: * Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, ...
    29: * Powersupply: 7.5v, 1A Output
    40: LaFonera complies with the following standards:
  79. LaFonera (en) (6,555 bytes)
    16: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(en) | width=48px | height=48px }}
    17: ...Fonera_Hardware_(en)|LaFonera Hardware]]''' <br/> Hardware related documentation
    19: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(en) | wi...
    20: |'''[[LaFonera_TestingArea_(en)|Playground]]''' <br/> Testing area
    63: will download the complete source-files in a directory called DD-WRT.
  80. LaFonera Software Flashing (30,993 bytes)
    1: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    34: ...P file server] on your Windows machine (it's a simple no-installer-needed HTTP server). If the link do...
    36: ...x.bytesex.org/misc/webfs.html webfs] as well. [Simple alternatives welcome]
    39: #*Simple TFTP server for Windows: http://www.jounin.net/t...
    40: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server ...
  81. LaFonera Hardware Second-Antenna (7,482 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
    9: The process should be pretty self explainitory, though I'm sure others may have other th...
    19: ... drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to...
    24: ...ng is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna c...
  82. LaFonera Hardware JTAG (268 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
    7: For now take a look at [[LaFonera_Hardware_IO_(en)]]
  83. LaFonera Hardware USB (9,766 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
    13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
    20: * 1x USB type B PCB socket [http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=43990&doy=12...
    21: * 1x USB type B plug [http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=12m3&ModuleNo=226...
  84. LaFonera Software Chilispot (12,365 bytes)
    17: ...re needed are here and here (only download if you plan to setup a http/ftp server locally, which is ou...
    18: ...nd root.fs build of ddwrt for atheros WiSOC based hardware, I used root.fs and vmlinux.bin.l7 ((06/10/07) st...
    46: ... SSH. This should work with other firmwares, too. Please change the name server according to your ISP ...
    66: 5. Your LaFonera should not be able to completely boot, because the FIS directory will be eras...
    78: ... have the first 8 secs to access to RedBoot via a plain Telnet connection. (I would avoid using the bu...
  85. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
    8: ...e to use DC/DC-converter inside LaFonera. For example RP10-4805SE from [http://www.recom-international...
    12: ...ntical when opened up, same circuit and component placement). This information is based on our experie...
    23: ... attached these pairs to the standard 5V power in plug, in the box where the unit is to be mounted.
  86. LaFonera Hardware Serial-Cable-Port (6,917 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
    7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
    17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
    19: [[Image:LaFonera_Hardware_Serial-Cable-Port_02.jpg]]
  87. LaFonera Software Debricking (6,898 bytes)
    18: ...d that’s about it. You can find some [[LaFonera Hardware Serial-Cable-Port | instructions for making a ser...
    24: Then just take your favorite terminal application and connect to serial port using baud rate...
    27: ...er your screen, quickly connect TX line. Other people just tried booting and connecting the serial cab...
    60: I played a little with it but in the end had to ask so...
    66: ...t even go with the TFTP variant. (Thanx to the people in the comments for pointing out the two easier ...
  88. LaFonera Hardware Disassembling (1,764 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
    8: | [[Image:LaFonera Hardware Disassembling 01.png]]
    11: Included is a 5 v Ac/Dc converter and a simple user manual.
    20: [[Image:LaFonera Hardware Disassembling 02.jpg]]
  89. LaFonera Software Universal-Repeater (25,850 bytes)
    10: I placed the files which are nessesary on my websrver ...
    28: You can change the file and repost it here, to apply more functionality to this script.
    30: ..., but i think some things are not working yet, so please take a look over it to make it working 100%.
    168: # nosbeacon disables the use of hardware beacon timers for ath1
    347: #simply discover strongest external AP dyanamic IP con...
  90. Siemens SE505 (3,810 bytes)
    1: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    9: ...rivial File Transfer Protocol (TFTP) is a very simple Filetransferprotocol.
    16: ...o this rule. This can be done by yast oder you simply type as root user:
    57: [[Category:Networking hardware tutorials]]
    58: [[Category:Hardware]]
  91. Hardware DIY (1,115 bytes)
    1: {{Languages|Hardware_DIY}}
    3: ==Hardware List==
    5: ...the Hardware link at the bottom of the page. Some hardware mods are located on their router's particular wik...
    13: [[Category:Hardware]]
  92. SES Button (2,058 bytes)
    21: ===Example to test custom button script===
    53: [[Category:Networking hardware]]
  93. LaFonera Hardware Cooling-System (11,159 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
    16: ...nd the life of this nifty little unit we shall simply add a clutch looking fan to the top. (how the fa...
    28: *Pliers
    51: 3. After making sure you have the right placement on the cover. Transfer the marked hole and...
  94. LaFonera Software Client-Bridge (9,933 bytes)
    7: ...less interface (from a host router). You can then plug a device (Laptop, PC, Games console, etc) in to...
    11: ...ile shares to be seen in Windows under My Network Places. Your main router also acts as the DHCP issue...
    30: HARDWARE - TESTED INFORMATION (MY CONFIGURATION)
    42: *3. NOTE: after each PAGE - hit APPLY (wait) before going on to next step
  95. LaFonera Hardware Controlling AC-Loads (4,663 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
    13: ...ld process, maybe we could create a controlling application together.
    15: == Hardware ==
    18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]]
  96. LaFonera Hardware Roboter Controlling (2,339 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
    13: ...ld process, maybe we could create a controlling application together.
    15: == Hardware ==
    16: The complete Robot, ready mounted - front view
  97. How to open my router (2,424 bytes)
    19: ..., push straight down and then forward to push the plastic bezel away from the router, as seen in figur...
    34: ...n the halves are approximately ¼ inch apart, the plastic strip and AOSS button will lift away from th...
    38: ...tom half. As you do this, you will see the clear, plastic LED manifold come into view. Carefully lift ...
    52: [[Category:Networking hardware]]
    53: [[Category:Hardware]]
  98. Default internal device network (6,480 bytes)
    10: ...guration works like this ''(parenthesis are pre-N hardware)'':
    12: The internal [[Separate_Lan_and_WLan#Hardware|network switch device]] has 6 [[Switched_Ports|po...
    21: ...r via trunking (note that by extension you can completely isolate a network by ''not'' including port ...
    25: ...d|wireless part of it]], which adds some extra complexity.
    27: ...tween vLan1 ''(vLan0)'' and eth1; rather, '''it employs a [http://linux-net.osdl.org/index.php/Bridge ...
  99. LaFonera Hardware Logo-Removal (2,569 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
    23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''...
  100. LaFonera Hardware Replace LEDs (6,702 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...[[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Replacing the green LEDs =
    8: '''Today we learn how to replace the green LEDs of your LaFonera with blue ones...
  101. JTAG pinouts (4,665 bytes)
    4: ... pinouts with photos are available there. Another place to look is [https://wikidevi.com/wiki/Main_Pag...
    66: [http://wiki.openwrt.org/OpenWrtDocs/Hardware/Buffalo/WBR-G54 WBR-G54 JTAG Info]
    174: ...on if you have to fix the code to match your JTAG hardware<br>
    175: ...r.com/jtagspiravi] with minor modifications and explanation of parallel port jtag to make your own<br>
  102. Serial port pinouts (6,672 bytes)
    4: ... add photos or diagrams, please [[Special:Upload|upload them]] to the wiki, then reference them here u...
    92: NOTE: RevB is completely different hardware, based on Ralink RT3050 SoC. The serial port runs...
    208: [[Category:Hardware]][[Category:Recovery]]
  103. LaFonera (de) (7,731 bytes)
    13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(de) | width=48px | height=48px }}
    14: ...ardware]]''' <br/> Dokumentationen bezüglich der Hardware
    16: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(de) | wi...
    64: Die kompletten Quelltexte sollten sich im SVN befinden, abe...
    84: * SD/MMC kernel module for [[LaFonera_Hardware_SD-Card|LaFonera SD-Card hack]] - (SD/MMC Driver)
  104. LaFonera (fr) (6,073 bytes)
    13: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(fr) | width=48px | height=48px }}
    14: |'''[[:Category:LaFonera_Hardware_(fr)|LaFonera Hardware]]''' <br/> Documentation à propos du matériel
    16: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(fr) | wi...
    17: |'''[[LaFonera_TestingArea_(fr)|Playground]]''' <br/> Zone de test
    34: ...re, celles ci-dessus sont reconnus pour être les plus stables et les moins buggées par les utilisate...
  105. LaFonera Hardware Logo-Removal (de) (2,955 bytes)
    2: [[Category:LaFonera_Hardware_(de)]]
    3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...ffektivste Weg um das Logo zu entfernen, ohne die Plastikoberfläche Deiner LaFonera zu beschädigen o...
    24: ...en der Politur mit einem feuchten Tuch, damit das Plastik nicht angegriffen wird
  106. LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
    5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
    11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
    23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''...
  107. LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
    19: ==Removing and replacing ram chips on the Fonera==
    23: ... keep the chip on when a little bit of force is applied to the chip. The legs will 'pop' from the pads...
    25: Get a sample ChipQuik SMD removal kit. It includes flux and s...
  108. LaFonera Hardware Replace LEDs (de) (6,319 bytes)
    1: [[Category:LaFonera_Hardware_(de)]]
    2: ...onera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
    4: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    12: I think it is very simple to do this modification - if you have some solde...
    28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]]
  109. LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
    2: [[Category:LaFonera_Hardware_(fr)]]
    3: ...onera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
    5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
    7: = Remplacer les LEDs vertes =
    8: '''Aujourd'hui nous allons voir comment remplacer les LEDs vertes de LaFonera par des bleues.''...
  110. LaFonera Hardware Power from USB (8,045 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
    6: ...hat limited by its power supply which needs to be plugged into a wall power socket. Wouldn’t it be n...
    8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe...
    10: This mod is quite simple; it requires no modification to the LaFonera, ju...
  111. LaFonera Hardware New Paint Job (1,237 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
    8: This is '''SIMPLE''' mod. It shouldn't take you more then 2 Hours ...
  112. LaFonera Hardware IO (en) (4,576 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
    9: ...the time to make a schmatic of the LaFonera yet? Please fill in the
    13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
    15: ... Reset TAP in Atheros AR2315 (from: Multiple sources)
  113. Linksys WRT300N v1, v1.1 (6,576 bytes)
    7: * Hardware Defaults (with Linksys firmware)
    17: ==Hardware Information==
    35: # Plug a lan cable from your computer to a LAN port on...
    55: # Plug a lan cable from your computer to a LAN port on...
    78: ...''wait at least 5 minutes''' for the router to complete flashing and rebooting
  114. LaFonera Hardware Modding (636 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
    7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
    9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
    11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]]
  115. SD/MMC mod (263 bytes)
    6: [[Category:Hardware]]
  116. Linksys WRT54G2 v1.0 (18,520 bytes)
    5: ==Hardware==
    36: ...w.dd-wrt.com/phpBB2/viewtopic.php?t=52876 blank apply.cgi issue]
    46: ... installed, other micro, [[Micro-plus]], or micro-plus_ssh versions can be flashed. For description of...
    47: ...p=1090693#1090693 here]. 18946 was the last micro-plus (currently not available), so for newer builds ...
    52: ... This has been confirmed by at least two other people.
  117. 安装 (16,952 bytes)
    13: ...specific]] page to '''accurately''' identify your hardware and not create a problem that renders your router...
    15: ...gotten some background on the peacock page, the [[Hardware-specific]] page may be the most useful page for y...
    18: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
    19: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction...
    23: ...8 for instance). Use the "_mini" firmware if your hardware has 4 MB or more of flash (WRT54GL for instance)....
  118. 硬件专用信息 (4,351 bytes)
    1: {{Languages|Hardware-specific}}
    2: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    4: Please also see in [[:Category:Networking hardware tutorials]]
    6: ...Hardware-Specific|Main Page Hardware-specific]] explanations. This has been condensed from a longer f...
    8: =Hardware Brand=
  119. LED Scripts (37,693 bytes)
    11: '''The example LED scripts below are usually written using the ...
    41: ...6" will completely erase your NVRAM (i.e. do a complete reset on your router)
    370: ==Display Load via LED (load.sh)==
    371: * Uses front button LED to display current load on router.
    433: Modified Script for simple display of cpu usage/load -- I use the power LED
  120. Прошивка WL-500W (10,168 bytes)
    160: [[Category:Networking hardware tutorials/ru]]
  121. Прошивка WL-500W с подробными скрин-шотами (10,274 bytes)
    171: [[Category:Networking hardware tutorials/ru]]
  122. Linksys E2100L (2,608 bytes)
    1: ===Hardware Information===
    59: '''Please see "[[Firmware_FAQ#Which_router_should_I_buy...
    66: #Wait until the router has completely finished flashing and rebooting (~5-10 minut...
  123. Linksys E800 (3,220 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E800 Hardware Information]=
    52: # Power cycle by unplugging the E800 for 10 seconds.
    53: # Plug the E800 back in and wait about 2 minutes until...
    65: #Apply Settings
  124. Main Page (1,889 bytes)
    1: {{Template:Welcome}}
    27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
  125. LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
    1: [[Category:LaFonera_Hardware_(en)]]
    2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
    31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
    40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
    46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in...
  126. Installation/fr (33,890 bytes)
    2: ... avec DD-WRT - ainsi que des informations qui s'appliquent à tous les routeurs.
    4: ==Choisir le bon logiciel embarqué - '''De la plus haute importance'''==
    14: ...ions spécifiques le concernant sur la page '''[[Hardware-specific/fr|Spécificités matérielles]]'''. N...
    17: ...inées à ceux qui rencontrent des problèmes. Le plus souvent, sauter cette étape conduit de nombreu...
    19: ...ock '' et l'information disponible dans la page [[Hardware-specific| Spécificités matérielles]] pour iden...
  127. Fr:materiel (2,134 bytes)
    1: ==Modifications Hardware==
    39: Pour plus d'informations, rendez-vous sur cette page [htt...
  128. Optware, the Right Way (36,809 bytes)
    9: ...ndex.php/OTRW2_%28Optware_the_right_way_Take_2%29 please go here]'''<br></big>
    40: *'''Network printing with Watchprinter''' - Plug a USB printer into your router and let anyone o...
    48: ...e information regarding what it does and how to implement NFS can be found here: http://www.dd-wrt.com...
    50: *'''Xinetd''' - A replacement for inetd, the internet services daemon. ...
    60: ...u can redirect some webrequests (for adds for example) to pixelserv. http://proxytunnel.sourceforge.n...
  129. LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
    1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
    5: [[Image:Fonera_card_reader_complete-top.jpg|thumb|center|658px|Fonera with a blue ...
    10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
    13: ...ng Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
    16: ...fe/Utility knife with a blade sutable for cutting plastic.
  130. WHR-HP-AG108 (13,246 bytes)
    10: ==Hardware==
    20: ...e=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=600453&fcc_id=%27FDI-09101540-0%27 FDI-...
    23: ... than WRT54G's), and its output level is fixed in hardware at 12 dBm. You may want check out [https://fjallf...
    51: ...* Start and point your tftp program to the proper place
    53: ...' when diagnostic red led comes on after unplug/repluging
  131. USB (11,810 bytes)
    19: * plus many newer routers
    21: Note: If the router hardware has a USB port, dd-wrt probably supports it. It m...
    23: ...ces. See [[USB storage]] for instructions and example scripts.
    25: ...ng on capability, but the ability to add external hardware easily makes these far more powerful units.
    29: ...g [[Samba]]; an external hard drive also provides plentiful swap space for use as virtual memory.
  132. Linksys WRT55AG v2.0 (614 bytes)
    3: ...the forum. Specs I gathered are in the 'supported hardware' matrix unless whoever redid that on 13 MAY 2010 ...
  133. Linksys E1550 (3,454 bytes)
    5: =Hardware Information=
    53: # Power cycle by unplugging E1550 for 10 seconds.
    54: # Plug the E1550 back in and wait about 2 minutes unti...
  134. Linksys E1500 (7,663 bytes)
    3: =Hardware [https://wikidevi.com/wiki/Linksys_E1500 Informat...
    49: # Power cycle by unplugging the E1500 for 10 seconds.
    50: # Plug back in then wait about 2 minutes until it fini...
    57: ...1100282#1100282 KRACK fixes] for Broadcom were completed in [http://svn.dd-wrt.com/?from=Nov+4%2C+2017...
    67: ...are Upgrade" screen, which is a web interface to upload a firmware using a TFTP server built into the ...
  135. Linksys E900 (3,213 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E900 Hardware Information]=
    52: # Power cycle by unplugging the E900 for 10 seconds.
    53: # Plug the E900 back in and wait about 2 minutes until...
    65: #Apply Settings
  136. Broadcom detection (3,378 bytes)
    9: ...to start" & "Compatibility" work for every device/hardware, except the cfe and nvram grabbing stuff.
    23: Please do the following check list and if one point ...
    49: ...r initial flash and it will not brick your router please give us cfe which is quite easy as you see he...
    77: Plz only report the gpio that changes. :-)
    105: [[Category:Networking hardware]]
  137. LaFonera Hardware LCD Screen (3,119 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
    9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
    12: ...e because of playing with IR receiver. So why not playing with serial 128*128 LCD ?
    14: ...nd animations. The uLCD model can only display simple stuff (line, cercle, text) and pixel after pixel...
  138. LaFonera Hardware IR Receiver (4,545 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
    8: ...er, a diode, a resistor and a78L05 regulator as explained here. But this wont work with USB/serial ada...
    10: ... used with USB/serial and embedded system with simple serial port like… La Fonera.
    13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]]
  139. LaFonera Hardware LaFoneraPlus (12,883 bytes)
    2: [[Category:LaFonera_Hardware_(en)]]
    3: ...egory:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
    6: = LaFonera Plus =
    7: There is a new Fon router : La fonera+ (plus). This router is quite similar than the classic...
    10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]]
  140. WRT54GL MAX232 Serial (6,868 bytes)
    3: ...licable to several other models based on the same hardware (WRT54G line et all). The MAX232 is a level conve...
    9: ...s of the WRT54G line include two serial ports, complete with pinholes on the circuit board. These oper...
    13: ...rt 3 pairs of pins. Be careful, the pin out is completely different than Max232: check data sheet.
    15: ...An other interesting feature is the "AutoShutDown Plus" circuitry that can decrease the power consumpt...
    21: ... and does the job nicely. I considered using a simple zenner regulator, but from what I've seen the wa...
  141. PC-Engines (12,674 bytes)
    4: ...sed on the AMD Geode LX700/800 cpu's which are simple [http://www.dd-wrt.com/wiki/index.php/X86 x86] c...
    19: ...or just simply drag-and-drop the image file onto the physdiskwr...
    29: ...ding using the webinterface too. for new install, please use the .image files
    36: if your ethernet interface is not detected, please login using the serial console and write me t...
    54: ...dditionally this version is capable of using multiple cpu's
  142. Hashes (98 bytes)
    3: <noinclude>[[Category:Flashing networking hardware]]</noinclude>
  143. Ddadder (757 bytes)
    9: ==Supported Hardware==
  144. TFTP flash (16,402 bytes)
    6: #Unplug the router, get a [[#TFTP Tools|TFTP client]] f...
    12: #Plug in the router and start the TFTP client '''as s...
    13: #*TTL=64 means application code has been reached. If the router isn't...
    17: ...G Deluxe), need additional steps to perform a complete and proper initial flash. See this wiki page: ...
    23: ...ple TCP/IP implementations that don't have CTCP implemented: Windows XP or Linux are reported to work,...
  145. Italian (1,683 bytes)
    1: {{Template:Welcome}}
    27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    28: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
  146. Changelog (7,371 bytes)
    5: The following is an incomplete summary of the changes since DD-WRT v23 SP2 (w...
    21: ** Multiple WLAN/SSID
    22: ** Multiple BSSID (different MACs for virtual interfaces)
    32: ** monitor multiple interfaces
    75: * this list is an incomplete summary of the changes since DD-WRT v23 SP2
  147. Gateworks Avila GW234x (30,744 bytes)
    3: ...he help send to me (and the patience he has) to explain many things about this topic (and others).
    64: ...to change cable to another GW234X device (for example).
    75: ...en the GW234X is answering the pings and plug-off/plug-on the power to the GW234X.
    90: ...COM with the default values: 115200,8,N,1 without hardware/software flow control.
    96: 4) Plug-off and plug-on the power to the GW234X.
  148. Linksys WRT1900AC (7,260 bytes)
    4: ...ilar that these instructions will probably also apply to the other versions, but it's not guaranteed.
    43: * If you do not plan to use the 5GHz wifi band, turn it off by addin...
    48: ...tion-part-3-channel-dilemma/438580919 DFS page] explains. Basically, the only usable ones are channels...
    50: ... also increase noise. The DFS page linked above explains channel width well. You'll have to see how ma...
    59: '''Example Settings:'''
  149. Repeating Mode Comparisons (6,438 bytes)
    7: Please note that some lines still require confirmati...
    8: ...nd your results differ from those indicated here, please add comments providing your HW and DD-WRT ver...
    17: ...(requires access) and requires a compatible WDS implementation. R/RB only needs to configure the repea...
    18: ...with wrt150n1.1 AP + wrt54g6 R] (TODO: test other hardware). R/RB support all encryption algorithms.
    19: ... by SSID. Both WDS and R support connecting multiple repeaters in series ("repeat a repeater"), howev...
  150. Linksys (267 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  151. Watchguard Firebox II (9,880 bytes)
    6: ...ebox III and Firebox x700 as well, due to similar hardware designs. In this guide, I assume that you have so...
    20: ...Integrated_Drive_Electronics IDE] hard drive, but please be aware of the limitations of hard disk spac...
    23: ...aving no noise coming from the router can be accomplished by this as well.
    27: ...o 12 volts supply in these routers. They can be replaced with an equivalent, but if you want absolute ...
    31: ... to the registered version of DD-WRT x86 as well. Please read the notes below on how to clone a mac ad...
  152. Netgear R6400v1 (2,598 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
    6: The hardware is almost identical to a Netgear R6300v2, but has...
    53: ...elect the factory reset option from the firmware upload GUI drop-down menu:<br>
    58: **Select radio button, then ''Apply'' settings
  153. Netgear R7000P (2,672 bytes)
    1: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
  154. Asus RT-AC56U (3,895 bytes)
    1: =[https://wikidevi.com/wiki/ASUS_RT-AC56U Hardware] Specifications=
    16: *Power Supply: 19V (DC) @ max 1.75A
    18: ...47081A0), has 128 MiB RAM, and different power supply. There is no evidence that it is supported at a...
    22: Example: [ftp://ftp.dd-wrt.com/betas/2017/12-29-2017-r34...
    42: #Plug the computer running the ASUS recovery tool int...
  155. Repeater Bridge/fr (12,531 bytes)
    23: Mode d'emploi pas à pas pour configurer le routeur sous DD-W...
    64: ...un mode de sécurité activé (WPA,WEP etc...), appliquer les instructions ci-dessous, sinon, aller au...
    79: #* Cliquer sur appliquer.
    80: # Les nouveaux paramètres sont appliqués et le routeur doit redémarrer. La connexio...
    81: ..., ce qui est utile pour faire des essais avant le placement définitif du routeur secondaire).
  156. Repeteur sans fil (12,493 bytes)
    20: Mode d'emploi pas à pas pour configurer le routeur sous DD-W...
    61: ...un mode de sécurité activé (WPA,WEP etc...), appliquer les instructions ci-dessous, sinon, aller au...
    76: #* Cliquer sur appliquer.
    77: # Les nouveaux paramètres sont appliqués et le routeur doit redémarrer. La connexio...
    78: ..., ce qui est utile pour faire des essais avant le placement définitif du routeur secondaire).
  157. Linksys WRT600N (4,396 bytes)
    3: ====Hardware Specs====
    56: Simply reset and flash the stock image via TFTP or thro...
    66: Plug the router in and nearly simultaneously hit the...
    67: ...omplete before hard reboot (physically unplug & replug). The router might not do anything so be patien...
  158. Asus WL-520GU (18,825 bytes)
    10: ..., then you may experience problems with certain applications; albeit those mainly include resource int...
    18: # Windows Client (TFTP firmware upload techniques when booting the WL-520GU will also...
    30: ..._asus.trx build is supposed to be designed to be uploaded as a firmware upgrade through the ASUS stock...
    43: ...nd. This puts the router into restoration mode. Plug a cable in the LAN port of the router, and the ...
    57: ...me), you can upload your file with tftp again. I uploaded the dd-wrt.v24_voip_generic.bin successfully...
  159. Linksys WAP54G (10,094 bytes)
    1: [[Linksys WAP54G Hardware Spec]]
    11: .....one simple but not permanent, and one not so simple but permanent.
    28: '''Example of startup script for a V1:'''
    34: '''Example of startup script for a V2.0:'''
    39: '''Example of startup script for a V3.X:'''
  160. LaFoneraPlus Software Flashing (10,090 bytes)
    4: ...gory:LaFonera_Software_(en)|Software]] / LaFonera Plus Initial Flashing'''
    17: ...dd-wrt I throw at it. I don't know if it's due to hardware or that it's less supported than my fon2100a/b/c ...
    29: #*Simple TFTP server for Windows: http://www.jounin.net/t...
    30: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server:
    47: You need to connect to your FoneraPlus using redboot
  161. X86 (8,329 bytes)
    3: ...sting very small low power industrial embedded PC plattforms e.g. the very popular [[PC-Engines|PC-Eng...
    5: == Applications ==
    7: ...at least, escape many of the limitations of small platforms.
    57: For example, we'll use: <br>
    75: * The adequade *.image from below fitting your plattform and needs
  162. Netgear WGR614 v8.0 & WGR614L (7,509 bytes)
    5: ...the two device names can be used interchangeably. Please note that to load firmware on this device it ...
    35: Most of the Broadcom hardware uses a TRX style firmware. Netgear's WGR614L Linu...
    75: ... new file "kernel_rootfs_image.chk" which can be uploaded to WGR614L using its Web UI or if you got th...
    137: ...ter you bring it back from the dead you can start playing with firmware again but not now!
    141: ... in the board itself after tining the wires and applying flux.
  163. Linksys WRT54GL (7,215 bytes)
    6: =Hardware [https://wikidevi.com/wiki/Linksys_WRT54GL_v1.1 S...
    7: *'''Platform''': Broadcom MIPS
    56: ...nterrupt the process until you are sure it has completed.
    65: #*# Wait again for the process to complete and the lights to return to normal (3-5 minute...
    70: ... in the name is required, which has a header with hardware info.
  164. Switch (3,590 bytes)
    6: ...can configure most DD-WRT capable routers as a simple 4 or 5 port switch. A switch is similar to a hu...
    50: ...ect ethernet cable to main router via LAN-to-LAN uplink*
    53: ...the TX power to 5mW or so. It may help keep your hardware temps cooler.
  165. Netgear WAG 102 (7,486 bytes)
    6: ==Hardware==
    237: ...e >[http://www.dd-wrt.com/wiki/index.php/LaFonera_Hardware_Serial-Cable-Port Fonera Serial Cable]<BR>
  166. Antenna mods (254 bytes)
    1: ...ennas]] (WIP - Work In Progress, and should be completed in the very near future.)
    5: [[Category:Hardware]]
  167. Accton Software Flashing (14,547 bytes)
    6: ==Hardware==
    24: ...P file server] on your Windows machine (it's a simple no-installer-needed HTTP server). If the link do...
    26: ...x.bytesex.org/misc/webfs.html webfs] as well. [Simple alternatives welcome]
    29: #*Simple TFTP server for Windows: http://www.jounin.net/t...
    30: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server:
  168. SENAO EOC-2610 (2,810 bytes)
    11: =Hardware=
    13: *Ubiquity Nanostation2 clone with better hardware.
    32: ...d push the hardware switch to ext. Now the rp-sma plug is active
    35: ...ou can solder RP-SMA connectors onto the internal plugs.
    59: ...; it may take a few seconds before the page is completely loaded by your web-browser.
  169. Bonding (4,814 bytes)
    8: =Samples=
    10: This is a description to setup a sample p2p-bridge with 2 bonded interfaces. <br>
    55: ...ggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active agg...
    58: ...n the base drivers for retrieving the speed and duplex of each slave.
    69: ... the bond such that different peers use different hardware addresses for the server.
  170. Buffalo N450 (831 bytes)
    1: == Hardware Information ==
  171. Linksys WRT350N (2,519 bytes)
    3: ===Hardware===
    22: # Plug a cable into the LAN port of the router and you...
  172. Advanced wireless settings/ja (51,292 bytes)
    81: ...to 802.11n are antenna diversity and spatial multiplexing. MIMO technology relies on multipath signals...
    83: ...or each MIMO antenna which translates to higher implementation costs compared to non-MIMO systems.
    117: ... very high level summary of the process when multiple devices are connected to an access point, they c...
    125: ...e are a few examples of what triggers CTS to be employed by the dd-wrt router software.
    129: ...ts require using CTS protection mode. This will apply the CTS protection mechanism on both 20 MHz halv...
  173. Upgrade from openwrt (743 bytes)
    5: Replace your firware image referenced below with the c...
    23: [[Category:Flashing networking hardware]]
  174. Triggertftp (1,465 bytes)
    49: [[Category:Flashing networking hardware]]
  175. Actiontec MI424WR (12,063 bytes)
    13: ...2/viewtopic.php?t=23514 here] for info on radio replacements
    18: ... stock ROM and Jungo loader will not allow us to upload the DD-WRT directly, using Python, we flash th...
    24: ...t search field. Select the desired linux.bin and place it in your TFTP server.
    36: ...port of the router and reboot the router. Rev. D: plug into LAN port.
    39: This is a sample screen output of the procedure while doing the a...
  176. 其它 (969 bytes)
    5: ...efinitions and considerable explanations. A great place for reference and general browsing.
    9: There are some pages that describe specific hardware with only loose
    20: * [[Hardware#NVRAM|NVRAM]]
    22: * [[Hardware#Overclocking|路由器超频]]
    24: * [[Hardware#Hardware_Modifications|硬件改造]]
  177. D-Link DIR-300 rev A (6,603 bytes)
    8: ...dure below is valid only for DIR-300 Revision A. Please check carefully the revision level of your D-...
    21: plugoff the power cord and replug it. You must press the RESET key for 5 sec.
    31: ...ow start a local tftp server on your computer and place ap61.ram as well as ap61.rom in the root dir o...
    36: ...oader should start. (on serial console it will display some warning. but you dont need to care about)....
    37: ...o be available at 192.168.1.2). Now you should be pluging on to any of the lan ports. Then connect via...
  178. PXE (2,146 bytes)
    2: ...ww.igel.com/ IGEL], [http://www.wyse.com/products/hardware/thinclients/ WYSE] , [DisklessWorkstations.com], ...
    4: ...de significant power savings, extended hardware replacement intervals, and centralized management.
    7: ...ss may be able to leverage the reliability and simplicity of embedded WRT devices over running DHCP se...
  179. Linksys RV042 (2,356 bytes)
    7: =Hardware=
    23: Hardware : Intel IXP425 IXDP425<br>
  180. Configure Samba in Linux (2,749 bytes)
    108: [[Category:Flashing networking hardware]]
  181. Overclocking (1,155 bytes)
    16: ...ond number is DRAM frequency, third number is Backplane frequency.
    40: [[Category:Networking hardware]]
  182. Antenna adjusting (1,007 bytes)
    14: [[Category: Hardware]]
    33: [[Category:Hardware]]
  183. Mobile Broadband (144,496 bytes)
    6: =Supported Platforms=
    24: This is '''not''' a complete list of supported devices, new modems are cont...
    5449: | Play PL
    19414: [[Category:Networking hardware tutorials]]
  184. Asus TFTP Flash (17,505 bytes)
    21: * Simple Windows GUI TFTP Utility: [http://www.3iii.dk/li...
    36: * or install ATFTP, which supports autocompletion and history, with '''''sudo aptitude install...
    41: == Commandline - Asus WL-500 series example ==
    53: ...d-wrt.com/dd-wrtv3/dd-wrt/hardware.html Supported Hardware] - type ''wl5'' to get the list)
    54: ...d-wrt.com/dd-wrtv3/dd-wrt/hardware.html Supported Hardware] - type ''wl5'' to get the list)
  185. Verizon FIOS setup Walkaround (1,566 bytes)
    9: ...less Off then hit Apply. Now that this is done, unplug the power cord from your AT.
    11: ...r from dd-wrt router. Then take an ethernet cable plug into a LAN port of the dd-wrt router to your PC...
    13: 4.- Now take another ethernet cable and plug it into a WAN port from the dd-wrt router to a ...
    21: [[Category:Networking hardware]]
  186. Verizon FIOS setup Walkaround with Coax cable (MoCA) (2,096 bytes)
    12: ...less Off then hit Apply. Now that this is done, unplug the power cord from your AT.
    14: ... from dd-wrt router. Then take an ethernet cable plug into a LAN port of the dd-wrt router to your PC...
    16: 4.- Now take another ethernet cable and plug it into a WAN port from the dd-wrt router to a ...
    29: [[Category:Networking hardware]]
  187. Linksys WRV54G (9,537 bytes)
    8: * Orig WiFi must be in place to boot the orig firmware!
    13: ... will be 192.168.1.1. Set up your tftp server and place the redboot into the root folder.
    18: OpenRG boot> Download completed successfully
    42: Network hardware address [MAC] for npe_eth0: 0x00:0x0C:0x41:0xD6:0...
    43: Network hardware address [MAC] for npe_eth1: 0x00:0x0C:0x41:0xD6:0...
  188. Asterisk (2,095 bytes)
    1: ... telephony equipment using relatively inexpensive hardware.
    5: ...nder dd-wrt, along with many other tools, in a completely automated manner.
    17: There's a simple GUI for Asterisk too, [http://www.dd-wrt.com/php...
    24: * [http://www.fivn.com/products/asterisk.html Simple Asterisk GUI]
    27: [[Category:Applications]]
  189. Power Supply Info (2,285 bytes)
    2: ...upply you with a .5 to 1.5 amp switching power supply way under what you need .
    40: Switching power supplies, are very efficient at converting voltage/curr...
    49: factoring in the inefficiencies of the power supply on the router, it is obvious that we are running...
    57: [[Category:Hardware]]
  190. Corerev List (3,597 bytes)
    3: ...ities. The Broadcom wireless drivers support multiple corerevs but must be compiled with the appropria...
    20: ...e appropriate section here and add it....do not duplicate your model if it already exists in this list...
    54: F7D4301v1 (Play Max) / wl0=17 / wl1=23
    242: [[Category:Networking hardware]]
  191. StarOS (2,648 bytes)
    20: Here is an example of OpenOCD configuration (without warranty) for ...
    87: [[Category:Networking hardware tutorials]]
  192. Insufficient ram (4,134 bytes)
    6: ...not occur until using the router with heavy P2P applications that cause the router to use ram that it ...
    13: ... you have rebooted and turned off any heavy P2P applications:
    29: *Limit upload speed to a maximum of 80% of what your ISP adv...
    39: ... consumes less RAM than the otherwise used DHCPd. Please DO NOT disable DNSMasq for DHCP.
    46: ...check HTTP and HTTPS in the Web Access section. Apply your changes.
  193. D-Link DIR-320 64 Mb RAM Upgrade (1,761 bytes)
    3: ...ou brick your router. If you don't have skills on hardware modding and SMD rework I don't recomend to perfor...
    9: ==For removing and replacing the chips (U14)==
  194. NEWD2 Support on some models (2,697 bytes)
    5: ... NEWD2 will or won't work for a particular model, please update this article.
    84: [[Category:Networking hardware]]
  195. Useful tools for the WiFi Network (11,758 bytes)
    4: ... makes sense for LAN-sized installations up to complex networks with hundreds of devices.
    12: ...are interested in graphing latency, etc grab this plugin for Cacti. It will allow you to graph latency...
    21: ...twork utilization information for the hosts and applications using the most bandwidth. Using Cisco Net...
    26: For more information, visit: www.plixer.com
    28: ...nalyzer is available for download at: http://www.plixer.com/products/netflow-sflow/free-netflow-scrut...
  196. D-Link DIR-330 (24,059 bytes)
    6: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-330 Hardware] Specifications==
    36: ...ey are built. I chose the Live CD because many people may not have Linux installed as a base; this way...
    37: ...nds an error or the procedure needs to be updated please do so.<br>
    48: Peacock Thread refered to in many places:
    58: [http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/d_link/dir_330 Click here]
  197. Linking Subnets with Static Routes (4,896 bytes)
    4: This guide aims to explain how to link different subnets together using s...
    8: ...ort is unbridged while the LAN switch (which is a hardware bridge) and wireless interfaces are software brid...
    13: ...g interface which is poor design but can overcome hardware limitations such as switches without vlans.
    16: ==Baseline Reference Example==
    28: ...rd traffic to Router1 for any subnet they don't explicitly have routes to.
  198. Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
    7: ...formed with the HTML GUI and Microsoft Internet Explorer Web browser:
    9: ...fully, as not all firmware versions work with all hardware versions.
    23: .... Did a 30-30-30 reboot, and DD-WRT was running. Uploaded the std_Generic build (also 13064). Found th...
    28: [dgb: 2009.04.25 V1.0 hardware with 1.02.1 firmware]
    33: ... wants to continue. The progress bar actually completes once then starts again before the failure not...
  199. Linksys WRT54G-RG (2,910 bytes)
    1: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware, but not firmware. You MUST USE THE CORRECT firm...
    30: Please note that there is no way to go back to Roger...
  200. Xbee (4,930 bytes)
    21: ...e the extra pin headers from the AdaFruit kit and place them in the router. Use the female jumper wir...
    50: ...n the router and the Xbee Carrier board. For example, hook the TX from the router serial port to the ...
    54: I plan on using this setup to read in sensor data from...
    60: ...utton and an Info box should pop up. Carefully replace the Xbee back into the carrier board, press th...
    63: Could somebody move this page to the hardware diy or point me in the direction so I can move it...
  201. D-Link DIR-600vB / 300vB (9,032 bytes)
    2: This page also applies to the '''DLink DIR-300 Rev.B'''
    6: ...[https://wikidevi.wi-cat.ru/D-Link_DIR-300_rev_B1 Hardware] Specifications==
    31: ...IR-300 Rev A1 and Rev B1 are completely different hardware, different SoC, different procedure. So, if you h...
    33: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    37: ==Pros of this hardware==
  202. Micro Redboot (3,960 bytes)
    5: ...stian Gottschall and puplishd unter the terms of GPL.<br>
    11: ... HW combinations so that its very likly that your Platform is supported. <br>
    15: =Supported hardware=
    20: *icplus
    27: ...icro Redboot will display the required ID's for implementation and you have to contact the dev´s.
  203. Linksys WRT54G2 v1.3 & WRT54GS2 v1.0 (5,285 bytes)
    7: ==Hardware==
    26: ... continue! (longer is better) Give vxworks killer plenty of time to do its magic!
    27: ...able to ping 192.168.1.1. If the router doesn't reply you haven't set your computer's network settings...
    31: ... you continue! (longer is better) Give the router plenty of time to to boot.
    43: ... continue! (longer is better) Give vxworks killer plenty of time to do its magic! After at least five...
  204. Wireless-N Configuration (13,269 bytes)
    3: ...ally affect performance and there still isn't any hardware commonly available capable of supporting the maxi...
    5: ...Output)] to increase throughput. MIMO means multiple antennas will operate together to provide better...
    7: ...it has two radios - one for each band. The same applies to client adapters. Check your device's docume...
    14: ...egacy systems, it requires one main 20MHz channel plus a free adjacent channel at ±20MHz. The main c...
    27: ... center of additional 20MHz) the devs opted to display it as (center of main 20MHz + center of 40MHz).
  205. Belkin F5D8235-4 v2000 (9,430 bytes)
    2: I have the F5D8235-4 Version: v2000 hardware. This is marketed as the "Belkin N+ Router" and ...
    46: hardware watchpoint : yes
    47: ASEs implemented : mips16 dsp
    69: HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
    70: N_HDLC line discipline registered.
  206. Asus RT-N16 (18,355 bytes)
    1: =Hardware=
    7: ==[https://wikidevi.com/wiki/ASUS_RT-N16 Hardware] Specifications==
    26: !Power Supply
    27: ...A max [[Asus_RT-N16#Links|(Upgrading the Power Supply)]]
    60: Please note: Details of the DD-WRT firmware build va...
  207. VLAN Detached Networks - Linksys E2500 (3,616 bytes)
    4: <tr><th>DD-WRT Port</th><th>Hardware/GUI Port</th></tr>
    15: ...tting and rebooting. So often times when using Apply Results from the GUI, the WAN interface gets set...
    18: ...etup -> Basic Setup -> RouterIP section will be applied to VLAN1. Bottom line, leave whatever ports y...
    21: ... my LAN and ports 3 and 4 to the DMZ. My initial plan was to make my LAN network 192.168.1.0/24 and m...
    23: === Split the VLANs ===
  208. Multiple WLANs (14,425 bytes)
    1: {{languages|Multiple_WLANs}}
    6: This guide teaches you how to broadcast multiple WLAN SSID's using virtual interfaces. You can ha...
    14: ... does routing for them. Keep your eye out for the places this guide gives alternative instructions for...
    19: ==Atheros Based Hardware==
    22: ==Broadcom Based Hardware (Very old)==
  209. Linksys WRT320N v1.0 (5,706 bytes)
    5: ===[https://wikidevi.com/wiki/Linksys_WRT320N_v1 Hardware] Specs===
    26: #*Unplug the router, push and hold the WPS button on the...
    27: #*Plug the router back in, continuing to hold the butt...
    51: #Unplug router
    53: #Plug power back in with button still pressed, hold d...
  210. OM1P config (1,528 bytes)
    5: The OM1P has a hardware watchdog that will reset the device every 5 minut...
    49: # send heartbeat to the hardware watchdog
  211. Asus RT-N12 (12,946 bytes)
    16: =Hardware Specifications=
    42: ... the initial firmware for a different revision of hardware''' or it may enter an infinite reboot loop. Reco...
    45: ... (or until the power LED blinks '''slowly''') and plug in power. Using a static IP for the computer, ...
    48: ...ls, hold the red WPS button for 20 seconds when applying power. '''Do NOT 30/30/30.'''
    50: ==Installation (applies to A1, B1, C1)==
  212. Hardware-specific (5,910 bytes)
    1: {{Languages|Hardware-specific}}
    3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
    7: =Hardware Brand=
    49: *[[Linksys Serial numbers|Identifying Hardware Versions]]
    130: *[[Cisco Valet Plus M20]]
  213. Linksys WTR54GS (572 bytes)
    5: ==Hardware v1==
    13: ==Hardware v2==
    23: ...4GS (Linksys Travel Router) flashing instructions please see
  214. Asus (230 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  215. MyPage (36,169 bytes)
    37: ...p the variable using nvram. (See [[Hardware#NVRAM|Hardware]])
    44: Here a brief explanation about all available features:
    47: ...All running processes since boot time are also displayed.
    53: ... for downloading CFE and NVRAM binaries to a safe place on your computer. Further it has a feature to ...
    99: ... file from the download section and find a useful place where to store it.
  216. Linksys WRT610N v2.0 (9,448 bytes)
    3: ...ng up in second-hand bins (thrift shops) for a couple of bucks, so I converted one to an E3000 and wil...
    11: '''The device hardware is identical to a [[Linksys_E3000]].'''<br>
    17: ...ages point to the E3000 pages, because again, the hardware is the same in the later model E3000 as the WRT61...
    23: * No "Easy recovery" after a 30-30-30 reset! Please read [http://www.dd-wrt.com/wiki/index.php/Li...
    35: ...ter a couple minutes you should see an "Update Completed Successfully" Screen.
  217. Netgear (236 bytes)
    1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info.
  218. Ubiquiti Litestation 2 (LS2/LS5/PS2/PS5/NS2/NS5/LSX) (1,705 bytes)
    12: ...g the web upgrade utility (e.g.V 2.1.9). If not, please reflash it using the Ubiquiti LS2 web interfa...
    34: [[Category:Networking hardware tutorials]]
    35: [[Category:Hardware]]
  219. Netgear WNDR3300 (18,349 bytes)
    3: == Hardware [https://wikidevi.com/wiki/Netgear_WNDR3300v1 Spe...
    33: ** Please search before starting a new thread for any s...
    36: * [https://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/netgear/wndr3300 OpenWRT wiki]: detailed informat...
    37: ...els] - list of channels for 2.4GHz and 5GHz bands plus country availability
    53: ...posts with problems can be traced to not fully completing the flashing procedures - specifically the r...
  220. Ubiquiti (818 bytes)
    2: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
    8: [[Category:Networking hardware tutorials]]
    9: [[Category:Hardware]]
  221. ASUS RT-G32 (9,327 bytes)
    4: Hardware: ASUS RT-G32 (this is not the Rev B version!)
    45: .../web/20100719092611/http://vladmgn.ru/wp-content/uploads/2010/02/config.txt config.txt]. There are li...
    61: # Start the TFTP server.<br />Make sure you place the config file you downloaded earlier in its ...
    63: ## Plug your ethernet cable in to port 4 on the router.
    64: ## Then plug in the power to the router, wait 2-3 seconds (u...
  222. Overclocking BCM 47xx CPU's (7,179 bytes)
    15: static uint32 BCMINITDATA(pll20mhz_table)[][8] = {
    16: ...i, pllctl12, pllctl13, pllctl14, pllctl15, |pllctl16 */
    88: ...u do not have to specify the third frequency (backplane frequency), but you can if you want. Anytime y...
    102: nvram set clkfreq=(value) example: 480,240,120
    108: [[Category:Networking hardware]]
  223. Configuring for Xbox 360 (4,308 bytes)
    1: Since it seems there are so many people trying to configure their Xbox 360s without succ...
    6: ==Option 1: UPnP (Universal Plug and Play)==
    8: Since the 360 is a UPnP compliant device, we can take advantage of the UPnP fun...
    16: # Save and apply settings.
    30: #* '''Application''' - name it whatever you want, Xbox 360 m...
  224. Netgear R6400v2 (2,478 bytes)
    5: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
    60: '''Hardware reset button:'''
    65: ...''Factory Defaults'' (select radio button, then apply settings)<br>
  225. Netgear R6700v3 (5,388 bytes)
    5: =Hardware Specs=
    58: #*A login page displays.
    67: #Click the Upload button.
    99: ... factory reset option from drop down on firmware upload web gui page. or use the reset to default sett...
    100: ...n > Factory Defaults (select radio button, then apply settings)<br>
  226. Netgear AC1450 (2,333 bytes)
    3: ==Hardware Specs==
    4: Same as the Netgear R6300v2. Software crippled.
    41: The OEM software-crippled Costco AC1450 hardware has the same FCC ID as the v2. Kong added support...
    54: ... factory reset option from drop down on firmware upload web gui page. or use the reset to default sett...
    55: ...n > Factory Defaults (select radio button, then apply settings)<br>
  227. Buffalo WZR-HP-G300NH (14,503 bytes)
    57: swconfig dev switch0 set apply
    67: ...ch into one of the g300nh's LAN ports and then simply use the switch to connect wired connections, sho...
    84: ...se firmware and rejects western firmware. For people with a Japanese router, see the following two si...
    122: ...G300NH2 and WZR-300HP, these units have different hardware than the v1 of this unit. Both the G300NH2 and 30...
    141: ...ive this atleast 10 minutes to complete, do not unplug or mess with the unit in any form or fashion......
  228. Что такое DD-WRT? (41,715 bytes)
    3: ...опрограммы) под лицензией GPL для множества ieee802.11a/b/g/h/n б...
    5: ... на прошивке под лицензией GPL от Linksys, которая включала в ...
    30: ...Glossary#Client Mode|Client Mode]] (supports multiple connected clients)
    39: *[[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required)
    56: *[[Glossary#Simple Network Management Protocol|SNMP]]
  229. OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
    1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
    2: ...are "like" vpn access for multiple computers or appliances)
    6: ...nt side to more than one client, device, and or appliance that does NOT have built in VPN capabilities...
    8: '''Examples Include:'''
    24: # Port 8080 will be used in this example, change this if you like.
  230. Asus WL-500g Premium V2 (13,166 bytes)
    7: Thought this would be a good place for '''ASUS WL-500G Premium v2''' specific inf...
    19: ...C adapter is fairly slim and does not hog up multiple spots on a standard power strip.
    21: ...nd 32MB of SDRAM, allowing DD-WRT Mega builds and plenty of resources for increased IP connections, ip...
    29: ==Hardware==
    30: *'''Platform''': Broadcom MIPS
  231. Linksys WRT300N v2.0 (5,657 bytes)
    26: ...uses the telnet interface into the router to accomplish it's task. <br>
    55: ....). Use the MAC address at the bottom of the unit plus 3. The one printed on the bottom is for the WAN...
    82: ==Hardware==
    106: http://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/linksys/wrt300n
  232. Linksys WRE54G (1,698 bytes)
    5: == Hardware Revisions ==
    6: There are three hardware revisions.
    11: Only the revision 1 hardware is compatible with DD-WRT at this time. Marvell ...
    13: The revision 1 hardware is very similar to a WRT54GS without the Ethernet...
    17: ...l is available for flashing the Linksys WRE54G v1 hardware to DD-WRT
  233. Contribute/es (3,357 bytes)
    14: ...cesita saber HTML, Wiki está editado en texto simple.
    15: ... y las categorías son auto-actualizables. Un ejemplo de una categoría se puede encontrar en la parte...
    27: ...yer]] - tiene que pagar costos de servidor, nuevo hardware y lo más importante '''comida''' y '''techo'''.
    41: The more people we have contributing to the project the better t...
  234. Linksys WRT54G2 v1.1 (2,119 bytes)
    3: ==[https://wikidevi.com/wiki/Linksys_WRT54G2_v1.1 Hardware] Specifications==
    22: ...er (and also the partition management), we must replace it using a serial console (baudrate 9600).
  235. Linksys WRT400N (3,467 bytes)
    1: = Hardware Specifications =
    46: ...LAN port of your router. Make sure your router is plugged in. Nothing should be connected to your comp...
    47: ...the power from the router for 30 seconds and then plug it back in)
  236. Linksys E1000 (4,980 bytes)
    1: '''WARNING:''' This is only for version 1 hardware. <font color=darkred>For version 2:</font> [[Lin...
    3: ==Hardware [https://wikidevi.com/wiki/Linksys_E1000_v1 Specs...
    27: # Browse to the downloaded firmware and click Upload.
    28: ...w rebooting. Your router may take upwards of a couple minutes to reboot. Watch the lights... once the ...
    29: # If the DD-WRT password change page displays, your upgrade has been successful, and you mus...
  237. Linksys E2000 (7,786 bytes)
    1: ==E2000 Hardware Specs==
    61: # Power cycle by unplugging E2000 for 30 secs.
    62: # Plug back in and wait about 5 minutes until it finis...
    85: ... Factory Defaults'' and select "Yes" and click "Apply Settings" and wait for router to reboot and retu...
    108: #''Unplug power cable''
  238. Linksys E3000 (15,009 bytes)
    10: =[https://wikidevi.wi-cat.ru/Linksys_E3000 Hardware] Specifications=
    85: *This guide also applies to units converted to an E3000, running Linksy...
    93: # Power cycle by unplugging E3000 for 30 secs.
    94: # Plug E3000 back in and wait about 5 minutes until it...
    97: ...r your browser cache if the web login does not display.
  239. Linksys WRT160N v2.0 (1,958 bytes)
    4: =Hardware specs:=
    8: .../toh/linksys/wrt160n Old OpenWrt Wiki » Table of Hardware » Linksys » Linksys WRT160N]<br>
    9: ....org/toh/linksys/wrt160n OpenWRT Wiki » Table of Hardware » Linksys » Linksys WRT160N]<br>
    21: [https://svn.dd-wrt.com/ticket/956 #956 closed (duplicate) WRT160n v2 Support]<br>
    29: ...N v2 - 'apply.cgi' Remote Command Injection (Metasploit)]<br>
  240. Linksys WRT310N v2.0 (6,551 bytes)
    1: ==Hardware Information==
    2: Hardware information can be found [https://wikidevi.wi-cat...
    19: # Place the router in Management Mode
    20: ...e continuing to hold for another 30 seconds, then plug back in while continuing to hold reset button f...
    21: ...le continuing to hold for another 5 seconds, then plug back in while continuing to hold reset button f...
  241. Installation/it (26,496 bytes)
    4: ...bile che siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifi...
    11: ... DD-WRT on a router in most cases is almost as simple as installing a program onto your computer. Howe...
    23: ... ulteriori informazioni a riguardo nella pagina [[Hardware-specific]].
    25: ...es, social, email, smartphone, ecc..), e leggi completamente questa pagina; ad eccezione di alcuni cas...
    37: ...rima di continuare devi essere certo dei dettagli hardware del tuo router e delle procedure corrette di inst...
  242. Public Sub-Net Over Dynamic WAN (5,015 bytes)
    17: ==Hardware, Firmware==
    26: ...before configuring using this procedure. See your hardware's instructions on how to properly hard reset it.
    30: ...l bridge '''br0'''. We will create a new VLAN by splitting off two of the LAN ports for our routed pub...
    38: * Press Apply Settings and then reboot the router
    86: ...-office-lan-using-dd-wrt setting-up-dmz-with-multiple-static-ips-on-an-office-lan-using-dd-wrt]
  243. Instalación en el enrutador WRT54G-TM (12,061 bytes)
    11: ... WRT54G-TM y WRT54G-RG son idénticos en cuanto a hardware, pero difieren en cuanto a firmware, DEBE UTILIZA...
    40: ...con el router '''antes''' y '''después''' de reemplazar el CFE en él. También permitirá que cargue...
    46: 3. (N.T.: Debí usar el Internet Explorer, con el Firefox en Windows nunca pude ingresa...
    49: ...tón Upgrade para permitir que el CFE_Updater reemplace el CFE original del router y borre el resto de...
    52: ...á a destellar en el router. NO asumas que el reemplazo de CFE/borrado de flash/proceso de reinicio ha...
  244. Firmware FAQ/zh cn (35,646 bytes)
    39: ...ange than the Linksys routers due to a built in amplifier.
    88: ...55.255.255.0. Then ping 192.168.1.1. If you get replies, then your router is not dead.
    90: ...er while it is booting. If you're able to get a reply for a short time, you should be able to reflash ...
    103: ...y use it when specifically told to do so (for example in the specific instructions for flashing your b...
    108: This guide applies ONLY when WL-xxx does NOT respond to the norma...
  245. Other resources (584 bytes)
    11: ...tps://wiki.openwrt.org/toh/start OpenWRT Table of Hardware] - good for recovery info specific to your router
    12: ...n_Page Wikidevi] - good for finding out the exact hardware for any router and any revision
  246. 固件FAQ/zh cn (23,519 bytes)
    39: ...ange than the Linksys routers due to a built in amplifier.
    88: ...55.255.255.0. Then ping 192.168.1.1. If you get replies, then your router is not dead.
    90: ...er while it is booting. If you're able to get a reply for a short time, you should be able to reflash ...
    103: ...y use it when specifically told to do so (for example in the specific instructions for flashing your b...
    108: This guide applies ONLY when WL-xxx does NOT respond to the norma...
  247. Reset And Reboot/zh cn (4,877 bytes)
    11: ...g in the reset button is to leave a network cable plugged in to your computer and the router, then wat...
    16: .... On some less-supported hardware this may have unpleasant results, so use the following two reset met...
    21: ...d have unpleasant results "on some less-supported hardware".
    30: For a cold boot, leave hardware off .. unplugged from any power source, for 30 seconds.
    38: ...to get different results by leaving the router "unplugged for a while".
  248. Installation/es (147 bytes)
    5: [[Category:Flashing networking hardware/es| ]]
  249. Asus RT-N10U (9,643 bytes)
    19: =Hardware=
    27: * Power supply - DC Output : 12 V with max. 1 A current => max ...
    35: Please note: The RT-N10U does REQUIRE the '''K26''' ...
    41: ===Principle steps===
    50: ...anced settings -> Administration -> Restore/Save/Upload Setting -> button Restore
  250. Asus RT-N66U (15,667 bytes)
    6: =Hardware [http://en.techinfodepot.shoutwiki.com/wiki/ASUS_...
    38: !Power supply
    56: * Reset '''BEFORE''' and '''AFTER''' firmware upload. If upgrading from DD-WRT to a newer version ...
    59: =====Upload via Web GUI =====
    61: #Upload the DD-WRT build using the stock web GUI (use ...
  251. Buffalo WZR-D1800H (1,151 bytes)
    1: =Hardware Info=
    49: ...e is for upgrading existing dd-wrt installations. Please practice all the proper flashing procedures -...
  252. Netgear WNDR3800 (3,709 bytes)
    3: = Hardware Information =
    57: ...onnect the PC to one of the router's LAN ports (unplug your ISP modem for the moment)</li>
    61: <li>Upload the .img firmware file, that you downloaded fr...
    84: '''TFPT Recovery - Sploit Notes'''
  253. Linksys E1200 (3,632 bytes)
    1: <span style="color:red">'''This page applies to version 1.'''</span> For version 2, see [[L...
    4: =Hardware Information=
    49: #Upload the known good initial flash [ftp://ftp.dd-wrt...
    50: ...re flash integrity, then power cycle the E1200 (unplug for 10 seconds).
    51: #Plug the E1200 back in and wait about 2 minutes unti...
  254. Прочее (603 bytes)
    14: [[Hardware/ru]] - Перевод "NVRAM" - работа с ...
  255. Device-Specific Information (539 bytes)
    2: There are some pages that describe specific hardware with only loose
    13: * [[Hardware#NVRAM|NVRAM]]
    15: * [[Hardware#Overclocking|Router Overclocking]]
    17: * [[Hardware#Hardware_Modifications|Hardware modifications]]
    23: *[[Linksys WAP54G Hardware Spec]]
  256. TP-Link TL-WA5210G (7,006 bytes)
    8: =Hardware=
    11: *Amplifier SE2576L http://www.sige.com/files/PB_DST_SE2...
    13: ...MB M12L128168A http://www.esmt.com.tw/DB/manager/upload/M12L128168A.pdf
    93: Software Platform for ARM
    102: 1: Download application program
  257. Chillispot/zh cn (27,752 bytes)
    31: ...ires changing your router flash and learning a completely new way of setting up the router, especially...
    39: ...ss and are familiar with Wiki-editing and Chilli, please update this Wiki with your preferred provide...
    50: ... show you a convenient customized screen-image displaying the entries for the DD-WRT Device.
    53: ... encryption for the WiFi for now. This greatly simplifies resolving issues.
    54: ...ther configurations are possible, the easiest examples used here assume your DD-WRT Device is using th...
  258. Advanced wireless settings (50,381 bytes)
    3: Before reading this page please be familiar with [[Basic_Wireless_Settings|Ba...
    5: This page contains more robust explanations of Advanced Wireless Settings than the bu...
    81: ...to 802.11n are antenna diversity and spatial multiplexing. MIMO technology relies on multipath signals...
    83: ...or each MIMO antenna which translates to higher implementation costs compared to non-MIMO systems.
    117: ... very high level summary of the process when multiple devices are connected to an access point, they c...
  259. Switch es (4,354 bytes)
    9: ... de los routers compatibles con DD-WRT como un simple switch de 4 o 5 puertos. Un switch es similar a ...
    43: ... principal via LAN-to-LAN por enlace ascendente (uplink)*
    46: ...ede ayudar a mantener fresca la temperatura de su hardware.
  260. QCA wireless settings (60,838 bytes)
    3: ...sic_Wireless_Settings|Basic Wireless Settings]] apply to all routers, all of which are listed here und...
    11: ...ctively where X = the interface's number. For example, a VAP made on ath0 will be ath0.1, then ath0.2,...
    41: ...AC/N-Mixed is the recommended setting for most people as your clients' NICs are able to use either (V)...
    64: ...''1) Select your country first and YOU MUST HIT APPLY! The driver needs to reconfigure the country for...
    83: ...(80 MHz), VHT160 (80+80 MHz), & VHT160 is only displayed & available for 802.11ac (5 GHz) routers that...
  261. Edimax 3g-6200n (1,156 bytes)
    4: ...vel of support found in latest snapshots. Similar hardware found in D-Link DIR-300 B1.
    14: Plate
    16: .../2200/edimax3g6200nplate.jpg [[Image:Edimax3g6200nplate.jpg]]]
    18: Plastic hooks keeping case together without screws
    30: Original Firmware by Edimax released under the GPL:
  262. Asus WL-500g Premium En (13,154 bytes)
    6: ...sted: Fri January 1, 2010 1:43 am Post subject: Reply with quote This is a problem with these routers:...
    56: ...ry USB kernel modules are loaded when you run. Simply cut out the text and / jffs store / etc / config...
    139: ...ge print jobs, too much RAM. p910nd Cup will take place from the job. Assuming a working USB.
    150: Now dmesg should show something like this (example):
    157: ...onfig/usb.startup''' and paste the following (example):
  263. Asus WL-500g Premium de (14,302 bytes)
    6: ...ted: Fri Jan 01, 2010 1:43 am Post subject: Reply with quote
    20: ...mium wird vom aktuellen Build (dd-wrt.v23 SP2) komplett unterstützt. Dies bedeutet die 32 MB RAM werd...
    23: ...s nachinstalliert werden können (mangels Speicherplatz).
    100: Die Partitionen der ersten USB-Platte sind nun über /dev/scsi/host0/bus0/target0/l...
    104: Mithilfe von hdparm und einer USB Festplatte habe ich den Datentransfer am Asus WL-500g Pr...
  264. Frys FR-300RTR (4,107 bytes)
    1: =Hardware=
    3: ... A1, and firmware version is 1.00. Luckily, it completely supports the DIR-615 E1 firmware.
    7: ==Pros of this hardware==
    12: * 2009 hardware, available in most Fry's Electronics
    16: ==Cons of this hardware==
  265. VLAN Support (11,146 bytes)
    11: ...g so that a single port can carry frames for multiple VLAN's
    15: Here are some broad generalizations about what hardware is believed to be able to support port-based VLAN...
    17: ...ces (the LAN ports are all one interface on these platforms).
    20: ...reconfigured and tagged using nvram settings as explained on the [[Switched Ports]] page because the V...
    26: ... between two devices that carries frames for multiple VLAN's. 802.1q VLAN's confirm that there is also...
  266. Installation/pt (13,927 bytes)
    3: ... roteador, na maioria dos casos, é quase tão simples quanto instalar um programa em seu computador. ...
    8: ...tá em processo de tradução, e encontra-se incompleto. Além disso, referências para outros artigos...
    10: ...oing a translation process, and is currently incomplete. Besides, references to other articles or page...
    15: ...os que funcionam com DD-WRT (em meados de 2009, o Hardware Database ainda estava em versão beta).
    17: ...ar informação específica para ele na página [[Hardware-specific]] relativa a seu roteador. No entanto, ...
  267. Netgear WNDR3700 (19,495 bytes)
    5: =Hardware Specifications=
    71: ... with initial factory firmware (1.0.4.31NA), the upload will fail with "Invalid file name!"
    73: '''NOTE:''' Please search the new build threads / flash and repo...
    74: *Please note, a smaller sized build will be required ...
    85: '''NOTE:''' Please search the new build threads / flash and repo...
  268. Watchguard Firebox Edge (1,135 bytes)
    13: =Hardware=
    44: [[Category:Hardware]]
  269. Asus RT-N13U (27,544 bytes)
    1: There are two hardware versions of this router, the original <b>'v1'</b>...
    16: ...and many device-hosted programs and USB-connected hardware.
    24: But perhaps eclipsing this accomplishment, grymster has succeeded in building a DD-W...
    27: ===Differences in Hardware===
    33: ...6472&postdays=0&postorder=asc&start=90 B1 here]. Please post any comments to the pertinent thread, [h...
  270. USB storage/zh cn (49,820 bytes)
    5: ... drives (notebook or desktop) can be converted simply by installing them in an inexpensive USB enclosu...
    6: ...s is full, a portion is swapped to disc and the applications continue to run normally, but with a spee...
    7: ... the NSLU2's capabilities (at a comparable price) plus offer all of the capabilites of a standard rout...
    36: ... now automatically detected correctly. Though the plug-in of a second drive did seem to confuse the "R...
    38: ...k/linux/dd-wrt/micro_plus_usb_asus520gc.bin micro_plus_usb_asus520gc.bin] version that combined with [...
  271. Активное охлаждение для D-Link DIR-825 (2,553 bytes)
    27: [[Category:Networking hardware tutorials/ru]]
  272. D-Link DIR-825 (7,853 bytes)
    3: =Hardware=
    5: ... true HD wireless connection that can handle multiple HD video streams throughout the house, while bei...
    60: ...rth America), TW (Taiwan), or WW (World Wide, any place other than NA or TW) which can be found below,...
    85: *Without releasing the reset button, unplug the router. Continue holding the reset button ...
    86: *Without releasing the reset button, plug the power back in and continue to hold the rese...
  273. FON Hotspot on La Fonera (27,637 bytes)
    3: ...the [[FON Hotspot]] guide, which was written a couple of years ago, we now seem to be able to configur...
    5: ...n DD-WRT v24 pre SP2 or newer, including on other hardware.
    11: ...- how to get DD-WRT onto your Fonera in the first place
    17: ...about what you're trying to achieve and about the hardware and firmware you're using to do so.
    19: ...24 pre SP2 build 14896. If you're using any other hardware, this guide should be taken as informative but no...
  274. AutoAP/zh cn (11,622 bytes)
    62: ...tting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to prefer to connect to a cert...
    72: What follows is a complete list of included [[Hardware#NVRAM|NVRAM]] variables and what they do (with de...
    84: ...is appended directly, preceeded by a "*key*". Example: "My Home", WEP key:1234567ab -> "My*Home*key*12...
    86: :'''nvram set autoap_aplimit="10"'''
    94: ...e amount of time to wait for a DHCP renewal to complete. If the routers you're accessing are fairly qu...
  275. Bountiful BWRG500 (6,325 bytes)
    26: ...l isn't interfering (it is best to turn it off completely for flashing).
    39: ..., do not disconnect or unplug your computer, or unplug the router.
    99: ...boot and work like it does on other Atheros based platforms.
    143: [[Category:Networking hardware tutorials]]
  276. D-Link DIR-615 rev D3 (4,639 bytes)
    1: =Hardware=
    3: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    7: ==Pros of this hardware==
    10: * Fairly new hardware (released in 2009?), so it's widely available for...
    12: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo...
  277. Optware/zh cn (45,404 bytes)
    11: ... all required files under /opt with 1000 ported applications. With buildroot toolchain, system library...
    12: ...packages, but still far smaller than glibc based aplications.
    20: ...package or optware-devel meta package provides complete development toolchain for compiling programs o...
    22: ...mended to unmount /jffs and then mount eg. mmc in place of /jffs.
    28: # WRT54g routers with hardware modification for MMC/SD card
  278. WHR-G300N V2 (8,426 bytes)
    31: I should note that I plan on doing some speed throughput tests with the 1...
    46: # Unplug all ethernet cables and the power cable.
    52: ...omething like "00:1D:73:8C:8D:D5" (THIS IS AN EXAMPLE DO NOT USE THIS NUMBER... I ACTUALLY JUST MADE I...
    56: ...u downloaded the firmware (otherwise you can not upload it using TFTP)
    60: #**Binary mode on (because we are uploading a binary file);<br><code>tftp> binary<br>mo...
  279. D-Link DIR-615 rev E3 (3,928 bytes)
    1: =Hardware=
    3: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    7: ==Pros of this hardware==
    11: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo...
    13: ==Cons of this hardware==
  280. 刷机 (18,418 bytes)
    16: ...果 DD-WRT 支持你的设备,你可能会在[[Hardware-specific|硬件相关]]页面找到与您设备...
    27: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
    28: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction...
    32: ...8 for instance). Use the "_mini" firmware if your hardware has 4 MB or more of flash (WRT54GL for instance)....
    40: ...。搜索功能应当返回两个结果。如果[[Hardware-specific|硬件相关]]页面有关于你的设...
  281. Advanced wireless settings/zh cn (56,094 bytes)
    60: ...to 802.11n are antenna diversity and spatial multiplexing. MIMO technology relies on multipath signals...
    62: ...or each MIMO antenna which translates to higher implementation costs compared to non-MIMO systems.
    87: ... very high level summary of the process when multiple devices are connected to an access point, they c...
    95: ...e are a few examples of what triggers CTS to be employed by the dd-wrt router software.
    101: ...ts require using CTS protection mode. This will apply the CTS protection mechanism on both 20 MHz halv...
  282. USB/zh cn (11,622 bytes)
    33: ...ng on capability, but the ability to add external hardware easily makes these far more powerful units.
    37: ...g [[Samba]]; an external hard drive also provides plentiful swap space for use as virtual memory.
    45: ... are available to be tested on the embedded Linux platform.
    49: ...tained media playback device. Note that the media player is deactivated whenever the USB interface is ...
    51: ...o USB hard drives) and video can be stored and displayed without relying on access to desktop PC's and...
  283. 3G / 3.5G/zh cn (10,040 bytes)
    7: *INTEL IXP platform (e.g. ADI Coyote, Gateworks Cambria, Tranze...
    14: This is '''NOT''' a complete list of supported devices. As time goes by the...
    225: [[Category:Networking hardware tutorials/zh cn]]
  284. Linksys WRT100/WRT110 (6,988 bytes)
    4: =Hardware=
    9: ...o.com/en-us/gplcodecenter?gplsku=#WRT110 Linksys GPL source code]
    21: ...e=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=291265&fcc_id=%27Q87-WRT110%27 Q87-WRT1...
    29: ...simple 7414 NOT gate to invert the Rx/Tx signals, plus a forgiving USB-Serial adapter that would accep...
    30: ...e RTS/CTS pins and the DTR/DSR pins to fake out a hardware handshake.
  285. RNX-GX4 Serial Port Connections (411 bytes)
    9: [[Category:Hardware]]
  286. WL-500W - возврат с DD-WRT на родную прошивку (2,904 bytes)
    56: [[Category:Networking hardware tutorials/ru]]
  287. Linksys RVS4000 (1,423 bytes)
    5: =Hardware=
    21: Hardware : STAR_STR9100<br>
    57: .../opensource/smallbusiness/rvs4000/ Cisco/Linksys GPL Firmware] <br>
  288. Serial Recovery (13,387 bytes)
    2: '''NOTE: THIS WIKI ARTICLE APPLIES TO BROADCOM DEVICES. FOR INFORMATION RELATED T...
    5: ...quired to debrick, if available, which can also replace a corrupted CFE. The last resort is to desold...
    44: *I downloaded a utility determining the attached hardware [http://www.users.on.net/~fzabkar/USB_IDs/UVCView...
    45: ...40112235523/http://prolificusa.com/drivers/PL2303/PL2303_Prolific_DriverInstaller_v130.zip Prolific dr...
    46: ...40112235626/http://prolificusa.com/drivers/PL2303/PL2303_Prolific_DriverInstaller_v1417.zip updated 1....
  289. Port Forwarding Troubleshooting (4,638 bytes)
    3: ...are firewalls on the host being forwarded to, unexplainable behavior caused by not hard resetting the ...
    8: ...e bugs with port forwards in DD-WRT have been unexplainable behavior of the underlying iptables rules ...
    27: ... If loopback worked then you likely have either a hardware firewall or NAT router between the router and the...
    30: ...'t get an IP from your ISP then you may need to unplug your modem for a few minutes to have it release...
    37: [[Category:Applications]]
  290. Прошивка TL-WR1043ND с подробными скрин-шотами (125 bytes)
    9: [[Category:Networking hardware tutorials/ru]]
  291. What is DD-WRT?/pt (52,338 bytes)
    4: ...nto de um firmware não oficial sob os termos da GPL para varios roteadores
    7: ... firmware [[wikipedia:GNU_General_Public_License|GPL]] original da Linksys e uma série de outros proj...
    10: A nova versão do DD-WRT (v24) é um projeto completamente novo. O DD-WRT oferece muitas funções a...
    13: ...rviço) e suporte ao software de modificação de hardware SD.
    14: ...ifica o DD no DD-WRT? Sash: isto é um código de placas de carro em Alemão para Dresden.
  292. Enabling VLAN Support for BCM4704 (6,027 bytes)
    2: ...4704 based devices by default so this page will explain how to enable it.
    4: ...column will still show up on the VLAN GUI page simply because the GUI isn't coded to know any better. ...
    30: ... method then you do not need to use the methods explained in the Very Hidden Support section below and...
    33: ...s which you can do manually on any Broadcom based hardware to enable VLAN support. The commands in this sect...
    36: ... are set. If the 0x'''0100''' bit is set then the hardware is capable of VLAN's. By default this bit is not ...
  293. Reconfigure VLANs for 802.1q Compatibility (3,409 bytes)
    2: ...trunking allows you to connect VLAN's across multiple devices without having to use a cable for each V...
    4: ...compatible with others devices. This guide will explain how to reconfigure a device with a Broadcom 10...
    12: # Press the '''Apply''' button and wait one minute before continuing.
    14: # Press the '''Apply''' button.
    20: # Press the '''Apply''' button and wait one minute before continuing.
  294. Перепрошивка WL-500W на DD-WRT в картинках! :) (11,206 bytes)
    161: [[Category:Networking hardware tutorials/ru]]
  295. Возврат WL-500W с DD-WRT на заводскую прошивку (3,331 bytes)
    61: [[Category:Networking hardware tutorials/ru]]
  296. Serial port on unused Ethernet pins (1,123 bytes)
    4: ... not want to drill holes in the case. This page explains how to add a serial interface to a non-Gigabi...
    10: ... Ethernet cable. In routers where the Ethernet coupling circuits are integrated into the connectors, i...
    17: [[Category:Hardware]]
  297. Recover from a bad flash/pt (1,747 bytes)
    26: [[Category:Flashing networking hardware/pt]]
  298. Buffalo WLI-TX4-G54HP (5,107 bytes)
    8: ...ports into a WAN port. The typical disclaimers apply; messing with this stuff could brick your unit.
    31: ...d without VLAN support. I tried this because the hardware is basically the same as the WHR-HP-G54, which su...
    48: ...y, remove <code>eth0</code> from the bridge and replace it with <code>vlan0</code>. This bridges the ...
    105: ...erstanding this will save a lot of trouble. It explains the default VLANs and interfaces.
  299. TP-LINK TL-WR841ND (3,030 bytes)
    3: ==Hardware==
    4: See the OpenWRT wiki for hardware and recovery: https://wiki.openwrt.org/toh/tp-lin...
    51: To get into the U-Boot prompt, you have to type >tpl< while booting.
    57: ...he following things into the bootloader prompt. Replace ROUTERIP and SERVERIP with the right IPs.
    63: ... we have to load the firmware into the memory!. Replace FACTORY-TO-OPENWRT/DDWRT.bin with the right fi...
  300. Hardware/ru (2,765 bytes)
    1: {{Languages|Hardware}}
    51: [[Category:Hardware/ru| ]]
  301. Добавление портов USB в D-Link DIR-320 вариант II (455 bytes)
    7: [[Category:Networking hardware tutorials/ru]]
  302. Linksys E1000 v2.0 (1,209 bytes)
    1: '''This is for the E1000v2.''' For version 1 hardware see [[Linksys E1000]].
    3: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
  303. Atheros AP81 (596 bytes)
    6: *Netgear WNR1000v1 (same hardware as [[D-Link DIR-615 rev C]])
    8: *TRENDnet TEW-632BRP (same hardware as [[D-Link DIR-615 rev C]])
  304. Buffalo WZR-HP-AG300H (7,851 bytes)
    1: =WZR-HP-AG300H Hardware Info=
    60: ...ive this atleast 10 minutes to complete, do not unplug or mess with the unit in any form or fashion......
    70: ...ed a WZR-600DHP, these units are exactly the same hardware, minus perhaps board id (unconfirmed), other than...
    84: ...ive this atleast 10 minutes to complete, do not unplug or mess with the unit in any form or fashion......
    106: ...s XP OS. '''I also always use a 10/100 or Gigabit hardware switch in-between the router and the PC, this way...
  305. D-Link DIR-601 (2,373 bytes)
    3: CONFIRMED TO WORK ON A1 HARDWARE VERSION ONLY!
    12: #Plug a cable into the LAN port of your router. Never...
    27: ... use Windows with Internet Explorer 6 or Ultra Simple Web Browser 2.0 [http://sf.net/projects/uswp/].)
    30: * unplug the power cable to the router
    31: * press the reset button and plug in the power cable when the power led flashes o...
  306. TP-LINK TL-WR740N (2,687 bytes)
    9: ===Hardware===
    13: *Hardware Version: WR740N v1/v2 00000000
    18: ===Photos of Hardware===
    53: -No TX rate increase, hardware limit is 18dBm
    70: .../dd-wrtv2/downloads/betas/2017/10-20-2017-r33555/tplink_tl-wr740nv4/tl-wr740nv4-webflash.bin] - Tmitt...
  307. Linksys E4200 (5,611 bytes)
    1: = Hardware Specifications =
    74: # Wait for flashing process to complete, ''then wait 3 more minutes''.
    77: #* If the browser GUI login does not display, clear the browser cache.
    92: ...ximately 5 minutes for the flashing process to complete.
    97: * As is explained in [http://www.dd-wrt.com/wiki/index.php/Wir...
  308. D-Link DIR-620 (1,829 bytes)
    4: =Hardware=
    6: == Pros for this hardware ==
    9: == Cons for this hardware ==
    51: ...ith [[Asus_RT-N13U]]'s images. N13U's images are uploaded via UART CLI by tftp client from tftp server...
  309. Mounting USB drive without located onboard fs modules (11,544 bytes)
    26: ... one (just some megabytes, not for formatting) to place tar'ed modules archive linearly.
    38: ... switch off the mode (command 'c') and change display units to
    89: Changing display/entry units to sectors
    171: Length: 166663 (163K) [application/x-gzip]
    203: After plugging USB device into box, new drive should appea...
  310. Japanese (2,133 bytes)
    1: {{Template:Welcome}}
    27: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    28: |'''[[Hardware DIY/Japanese|ハードウェアDIY]]''' <br/> ハ...
  311. D-Link DIR-632 (11,027 bytes)
    1: =Hardware=
    10: ==Pros of this hardware==
    18: ==Cons of this hardware==
    63: ...e=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=640475&fcc_id=%27KA2IR632A1%27 KA2IR632...
    73: ... that is is pre-release firmware at the momment. Please read the support forum listed at the bottom o...
  312. Netgear WNDR3400 (7,599 bytes)
    7: ... is an unofficial port of dd-wrt to the version 2 hardware it is discussed here [http://www.dd-wrt.com/phpBB...
    9: ... is an unofficial port of dd-wrt to the version 3 hardware it is discussed in this thread here [http://www.d...
    17: = Hardware Specs =
    54: ...ith the appropriate mini firmware above. If it complains about downgrading, just Allow.
    88: ... IN THE FORUM WITH PROPER AMPLIFYING INFORMATION, PLEASE. THIS INFORMATION DOES NOT DO THE COMMUNITY ...
  313. Hotspot Chillispot (22,966 bytes)
    6: ...y make the wireless or lan-connected computers display a 'landing page' on user's browsers.
    28: ...ires changing your router flash and learning a completely new way of setting up the router, especially...
    33: ...ss and are familiar with Wiki-editing and Chilli, please update this Wiki with your preferred provide...
    43: ... show you a convenient customized screen-image displaying the entries for the DD-WRT Device.
    46: ... encryption for the WiFi for now. This greatly simplifies resolving issues.
  314. Netgear WNR2000V2 (7,719 bytes)
    3: =Hardware=
    62: DD-WRT replaces the ''linux'' partition and adds ''ddwrt'', b...
    86: ...ck ''Save'' on each tab, then when done click ''Apply''
    99: The BCM4716 uses the pll20mhz_table from [http://svn.dd-wrt.com/browser/s...
    100: ...le), or for more options set clkfreq based on the pll20mhz_table's ''{cpu,ddr,axi}'' settings.
  315. D-Link DIR-810L (5,047 bytes)
    3: =Hardware=
    76: ...itch to another tab, and when you are done, hit APPLY.
    91: #''Choose File'' then select ''Upload'' on the D-Link Router Recovery Mode
    92: ...rmware successfully loads, a Success page will display
    93: *If upload fails, try a different web browser (MS Edge ha...
  316. Netgear WNDR4000 (7,463 bytes)
    2: = Hardware Specs =
    47: #Upload the .chk trailed build, downloaded above.
    59: <font color=red>Verify the build you plan to flash is less than 7995392 bytes ('''7808 KB...
    91: ...with 500 and 533 options. The SoC references the pll20mhz_table from [http://svn.dd-wrt.com/browser/s...
    96: ...h `nvram get clkfreq` then run the following to apply:
  317. Linksys E3200 (4,489 bytes)
    1: =[https://wikidevi.wi-cat.ru/Linksys_E3200 Hardware Specifications]=
    49: The E3200 has an internal amplifier for each radio. You can use some of these fi...
    86: # Power cycle the E3200 by unplugging it for 10 seconds.
    87: # Plug the E3200 back in and wait about 5 minutes unti...
    92: ...1100282#1100282 KRACK fixes] for Broadcom were completed in [http://svn.dd-wrt.com/?from=Nov+4%2C+2017...
  318. Sapido RB-1132 (64 bytes)
    3: [[Category:Networking hardware]]
  319. TP-Link TL-WDR4300 (7,751 bytes)
    5: = [https://wikidevi.wi-cat.ru/TP-LINK_TL-WDR4300 Hardware] Specifications =
    42: ... if the router was bought in the US) from the '''tplink_tl-wdr4300v1''' folder.<br>See [[Index:FAQ#Whe...
    49: # Using Internet Explorer and a PC connected via Ethernet, flash factor...
    57: ... if the router was bought in the US) from the '''tplink_tl-wdr4300v1''' folder.<br> See [[Index:FAQ#Wh...
    62: =Multiple VLAN and SSID Configuration=
  320. Asus RT-N13U, page 2 (20,356 bytes)
    10: === Differences in Hardware ===
    11: ...us_RT-N13U#Differences_in_Hardware Differences in Hardware] on page 1.
    62: The plan is to have everything torrent go to the folder ...
    107: "upload-limit": 200,
    108: "upload-limit-enabled": 1
  321. Index:FAQ/ja (48,907 bytes)
    90: ...e power light to be flashing, which tells you the hardware is probably not toasted yet.) これを確認す...
    92: ...er while it is booting. If you're able to get a reply for a short time, you should be able to reflash ...
    107: ...y use it when specifically told to do so (for example in the specific instructions for flashing your b...
    129: ...P 192.168.1.2 make sure that it is in 10MB half duplex mode!)
    132: ...29lv320 and short PIN 10 with the golden wireless plug using a paperclip.) ルータの電源ランプ...
  322. Linksys E2500 (7,286 bytes)
    1: =Hardware Information=
    50: # Power cycle by unplugging E2500 for 10 seconds.
    51: # Plug E2500 back in and wait about 3 minutes until it...
    59: ...3F|Where do I download firmware]] in the FAQ. Example build thread: [https://www.dd-wrt.com/phpBB2/vie...
    62: =Flashing hardware version 2=
  323. Linksys E1200v2 (3,241 bytes)
    1: <span style="color:red">'''This page applies to version 2.'''</span> For version 1, see [[L...
    4: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
    47: ...ash the ''-nv64k.bin'' upgrade build then when complete, reset using the GUI
    48: #*Wait 3-4 minutes for the flash to complete, then if isn't accessible, manually power cycl...
  324. TP-Link TL-WDR3600 (9,665 bytes)
    2: Place holder for TL-WDR3600. Please add useful infos!<br>
    3: DD-WRT currently only supports v1, tplink_tl-wdr3600v1 folder.<br>
    27: ...hpBB2/viewtopic.php?t=209922 TP-LINK TL-WDR3600 - hardware NAT ?]<br>
    31: ...//forum.dd-wrt.com/phpBB2/viewtopic.php?t=258441 TPLINK TL-WDR3600 v1 slow usb disk read/write]<br>
    32: ...259152 Problem with WDR3600 when other Switch is Uplinked to Port]<br>
  325. Alfa N5 (1,301 bytes)
    3: '''= Planet WNAP-7320 = OTAi 724S'''
    7: =Hardware=
    51: [[Category:Networking hardware tutorials]]
  326. Ralink (unbranded/unsupported) (897 bytes)
    7: =Supported Hardware=
    26: ...its have an external switch, so there is always a hardware donation needed for porting it to DD-WRT.
    37: [[Category:Hardware]]
  327. What is DD-WRT?/fr (53,667 bytes)
    3: ...mware|firmware]] released under the terms of the GPL for many ieee802.11a/b/g/h/n wireless routers bas...
    5: ... original [[wikipedia:GNU_General_Public_License|GPL]]'d Linksys firmware and a number of other open s...
    9: The new version of DD-WRT (v24) ''is a completely new project''. DD-WRT offers many advanced f...
    11: ...esses, etc. However, there is now a bugtracker in place for DD-WRT firmware located here:'' [http://ww...
    13: ... allocation, and software support for the SD-Card hardware modification.<br>
  328. Hardware-specific/fr (567 bytes)
    1: {{Languages|Hardware-specific}}
    4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
  329. Accueil/fr (2,049 bytes)
    1: {{Template:Bienvenue}}
    28: |{{Click || image=development.jpg | link=Hardware_DIY| width=48px | height=48px }}
    29: |'''[[Hardware DIY]]''' <br/> Hardware tutorials, JTAG, serial port, how to open, ...
  330. Linksys WRT54G/GL/GS/GX/fr (7,076 bytes)
    17: ...ware Linksys, utilisez de préférence Internet Explorer : le firmware Linksys fonctionne souvent inco...
    18: ...carte, il vaut mieux que celle-ci ait une IP fixe plutôt que paramétrée en DHCP (propriétés TCP/I...
    41: '''5) Interface inexploitable avec des caractères bizarres'''<br>
    42: - il faut simplement vider le cache de Internet Explorer en allant dans outils/Options Internet/suppri...
    79: * sur la 1ère fenêtre, il doit avoir marqué "Hardware Error"
  331. Ancienne page d'accueil FR (22,581 bytes)
    1: ...la page d'accueil EN dans le but de, en ayant un plus grand parallélisme, faciliter le travail des ...
    10: ... une documentation technique et d'installation complète pour le firmware [http://www.dd-wrt.com/ DD-W...
    15: ...c], lequel a été construit sur la distribution GPL originale de Linksys et sur d'autres projets open...
    16: ==Liste complète des fonctionnalités==
    25: ...de client (Support de connexion pour clients multiples)
  332. 貢献 (4,423 bytes)
    24: ...ayer|BrainSlayer]] - has to pay server costs, new hardware and most importantly food and shelter.)
    38: ...ァームウェアになります。(The more people we have contributing to the project the better t...
  333. TP-Link WA5210G (4,915 bytes)
    34: Advantages of the WA-5210G hardware in comparison with NanoStation 2:
    37: ...l execution of Senao firm, and also WA-5110G as a plate option, etc.
    38: ...he decision on firmware creation on the basis of GPL of source codes from Ubiquiti was made.
    40: ... TP-Link TL-WR842ND device, stitched (while it is hardware) in NanoStation M2. Development of a method of ch...
    43: According to the above link full flash for the hardware method of alteration, and a firmware for standard...
  334. Additional DNSMasq Options (4,130 bytes)
    14: * '''Validate DNS Replies (DNSSEC)''' requests and validates DNSSEC reco...
    16: ...ed DNS replies''' also checks that unsigned DNS replies are legitimate (they belong to domains that ac...
    18: ...upstream server. This option is available on some hardware that does not support direct DNSSEC validation, b...
    21: ...bl-dns-rebinding-attacks/ ext link] on security implications
    30: ...ow one fun trick that might be useful for some people.
  335. Linksys EA6300 (1,995 bytes)
    1: ...pot.shoutwiki.com/wiki/Linksys_EA6300_v1 EA6300V1 hardware] with an FCC/IC ID suffix of ''EA6400'' is identi...
    5: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
    33: & two 5 GHz amplifiers
    53: '''EA6300V1''' hardware with an FCC/IC ID suffix of ''EA6400'' is identic...
    56: The following hardware uses '''''linksys-ea6350''''' firmware: see this ...
  336. Linksys EA6700 (1,713 bytes)
    3: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
    30: ...802.11a/b/g/n/ac transceiver Unidentified 5 GHz amplifiers (x2)
  337. TP-Link TL-WA7210v2 (310 bytes)
    7: =Hardware=
    10: *Amplifier SE2576L http://www.sige.com/files/PB_DST_SE2...
  338. Netgear WNR2000V3 (9,208 bytes)
    5: =Hardware=
    63: ...a Mac, you can use this command from Terminal to upload the firmware instead of tftp.exe: tftp -i 192....
    67: ...to TYPE a username and password into the boxes displayed.
    74: ...le size limitation of the partitioned nvram. Multiple 30/30/30 resets caused unit to brick, but I reco...
    77: ...1.0.1.26 directly from the Netgear website and simply use the existing Netgear GUI to downgrade it. I...
  339. Optware on K3-AC-ARM/Repositories (3,308 bytes)
    6: ...m this repository are broadly compatible with our hardware, although not all of them work out of the box wit...
    8: ...hing gets installed under /opt. This will break applications that use hard-coded paths; sometimes a co...
    9: ... available under DD-WRT (e.g. fuse) but if your application requires non-standard kernel modules (from...
    28: ...repository and are prepared to go public with it, please list it here.
  340. Asus RT-AC68U (13,295 bytes)
    9: =Hardware Specifications=
    159: This wiki applies to all versions of the RT-AC68* routers suppor...
    174: ...Note: If you forgot the username and/or password, please restore the router to the factory default sta...
    175: *Please refer to [https://www.asus.com/support/FAQ/10...
    177: <li>Click on Firmware Upgrade tab and Click Upload.</li>
  341. Netgear R7000 (13,608 bytes)
    10: =[https://wikidevi.wi-cat.ru/Netgear_R7000 Hardware Specifications]=
    63: ...e the [https://kb.netgear.com/000059633/How-do-I-upload-firmware-to-my-NETGEAR-router-using-a-TFTP-cli...
    71: *A login page displays.
    79: <li>Click the Upload button.</li>
    82: <li>When the router has finished completely rebooting, enter http://192.168.1.1 in the n...
  342. Asus RT-AC66U (13,665 bytes)
    1: <font color=darkred>Note that the two existing hardware revisions, "A1" and "B1", of this router are sign...
    3: =Hardware [https://web.archive.org/web/20191020204146/https...
    15: *Hardware Buttons: WPS, Reset, & Power
    20: ...se the ''asus-rt-ac66u/'' folder for this router (hardware revision "A1").
    31: #Please note that CFE version must be between 1.0.1.3...
  343. D-Link DIR-868L (15,767 bytes)
    7: =Hardware Specifications=
    46: * A login page will display. Default login is admin/no password. It is reco...
    50: <li> Click on Upload.</li>
    86: ...d select the appropriate previously downloaded ''tplink_archer-c7.bin'' file specific to your router m...
    103: # Unplug all cables (incl. power cable) from the router.
  344. Google Chromecast (756 bytes)
    23: [[Category:Networking hardware]]
  345. TP Link Archer C7 (13,863 bytes)
    5: =Hardware Specifications=
    63: .../dd-wrtv2/downloads/betas/2018/11-23-2018-r37837/tplink_archer-c7-v5/ 37837] for initial flash.'''
    69: ... applicable factory-to-ddwrt.bin file from the ''tplink_archer-c7-v1'' folder.
    70: ..._archer-c7.bin file from the current release's ''tplink_archer-c7-v1 folder''.
    77: .../dd-wrtv2/downloads/betas/2020/04-15-2020-r42910/tplink_archer-c7-v2/ 42910] for initial DD-WRT flash,...
  346. D-Link DIR-615 rev D2 (1,721 bytes)
    7: = Hardware Specs =
    39: =Hardware=
    40: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
    44: ==Pros of this hardware==
    48: * Easy to install DD-WRT on this hardware.
  347. Netgear R6300v2 (9,719 bytes)
    5: =Hardware Specs=
    95: ...n Broadcom routers, even if some details do not apply to an ARM device.
    137: ...supported. Just use the dd-wrt web interface and upload netgear firmware. Since netgear is not using t...
    156: ...elect the factory reset option from the firmware upload GUI drop-down menu:<br>
    161: **Select radio button, then ''Apply'' settings
  348. ASUS RT-AC52U (1,023 bytes)
    6: = Hardware Specs =
    38: =Hardware=
    41: ==Pros of this hardware==
    47: ==Cons of this hardware==
  349. Netgear WNDR4300 (7,508 bytes)
    4: |+ Hardware Specifications
    38: ...ware or DD-WRT. Installation of DD-WRT is very simple and can be done in a few steps.
    68: #*A login page displays.
    75: #Click the Upload button.
    83: ... -> Factory Defaults'', select 'Yes' and click 'Apply Settings'.
  350. Asus RT-AC88U (9,626 bytes)
    5: =Hardware [http://techinfodepot.shoutwiki.com/wiki/ASUS_RT-...
    102: # Place the router in Rescue Mode:
    103: ## Unplug the router's power cord (you may try waiting a ...
    105: ## Keep long pressing the Reset button and plug the cord to DC IN at the same time.
    106: ##* '''Notice:''' Please DO NOT release the Reset button until the Res...
  351. Asus T-Mobile Cellspot (9,687 bytes)
    7: ...n.techinfodepot.shoutwiki.com/wiki/ASUS_TM-AC1900 Hardware Specifications]=
    73: ...are (1703 for example), enable Telnet, and then replace the CFE (preferrably with an Asus RT-AC68U ver...
    115: ...ration -> System -> Enable Telnet=Yes -> click 'Apply'
    123: ...ac-router-by-asus-free-for-postpaid-25-deposit '''HARDWARE NVRAM RESET:''']
    136: 3) Place router in recovery mode and install [[Merlin f...
  352. Netgear R6300 (10,406 bytes)
    4: This is only for '''v1''' (MIPS) hardware, which has "R6300" printed on the bottom label.<b...
    7: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Netgear_...
    92: ...re is supported. Use the DD-WRT Web interface to upload Netgear firmware using the [[Netgear_R6300#DD-...
    95: Please note that all DDWRT builds for many years now...
    109: Since end of 2017 DDWRT has implemented "Shortcut Forwarding Engine" (Setup -> Bas...
  353. Linksys EA6400 (6,756 bytes)
    1: EA6300V1 hardware with an FCC/IC ID suffix of ''EA6400'' is identic...
    3: =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
    32: & two 5 GHz amplifiers
    53: *EA6300v1 hardware with FCC/IC ID suffix of ''EA6400'' is identical ...
    64: ...al flash to DD-WRT. One was previously able to simply flash the EA6400 directly with a DD-WRT image in...
  354. TP Link Archer C9 (15,608 bytes)
    4: ...depot.shoutwiki.com/wiki/TP-LINK_Archer_C9_seires Hardware] [https://wikidevi.wi-cat.ru/TP-LINK_Archer_C9_v1...
    158: ... Download '''factory-to-ddwrt.bin''' from the '''tplink_archer-c9v1''' directory from one of the links...
    159: .../dd-wrtv2/downloads/betas/2016/04-05-2016-r29409/tplink_archer-c9v1/factory-to-ddwrt.bin build 04-05-2...
    167: #Open a browser and go to http://tplinkwifi.net (or http://192.168.0.1 if you have not...
    170: ...omatically after the upgrading has been finished. Please wait about 3-5 minutes.
  355. Linksys EA6900 (7,071 bytes)
    4: ==Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_...
    60: Please refer to this forum thread for the latest inf...
    68: ...ing window is 64, if by then the utility has not uploaded the older Linksys firmware, power cycle the ...
    70: .... So the best way is to just start clicking the upload button as soon as you see the pings back with ...
    72: ... the partition with the old Linksys firmware you uploaded. Once you are on that firmware you can then...
  356. Linksys EA8500 (25,401 bytes)
    3: ==Hardware==
    5: [https://wikidevi.com/wiki/Linksys_EA8500 Hardware Spec]
    41: ===Upload via Web UI===
    43: ...EADME on http://mrjcd.com/Malachi/KONG-EA8500/. Upload the Kong Build [http://mrjcd.com/Malachi/KONG-...
    44: When the installation is complete (a “Reboot” button appears on the UI), res...
  357. Hash (98 bytes)
    3: <noinclude>[[Category:Flashing networking hardware]]</noinclude>
  358. Checksum (98 bytes)
    3: <noinclude>[[Category:Flashing networking hardware]]</noinclude>
  359. TP Link Archer C8 (4,590 bytes)
    5: ...fodepot.shoutwiki.com/wiki/TP-LINK_Archer_C8_v1.x Hardware] Specifications==
    98: .../dd-wrtv2/downloads/betas/2016/12-15-2016-r30949/tplink_archer-c8v1/ factory-to-ddwrt.bin]
    100: #Also from the Archer GUI, upload the factory-to-ddwrt.bin file.
  360. Firmware FAQ/ja (38,399 bytes)
    34: ...mware builds are beta releases with no or limited hardware testing. '''Proceed with caution!'''
    44: ...'. Always read the newest build thread first. Example: [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=...
    60: ...rks OEM fimware that have special procedures to replace the CFE (bootloader). '''To upgrade, use the g...
    98: ...55.255.255.0. Then ping 192.168.1.1. If you get replies, then your router is not dead.
    100: ...er while it is booting. If you're able to get a reply for a short time, you should be able to reflash ...
  361. Установка (37,694 bytes)
    17: ...и которую можно в разделе [[Hardware-specific]] (англ.). Однако, чтобы ...
    29: ...ормацию страницы раздела [[Hardware-specific]], посвященную конкрет...
    32: ...й модели страницы раздела [[Hardware-specific]]''', чтобы точно опреде...
    33: ...ть же, проверьте страницу [[Hardware-specific]] для ссылок на подроб...
    45: ... маршрутизатора в разделе [[Hardware-specific]]. Это будет похоже на ...
  362. Известные несовместимые устройства (19,966 bytes)
    32: | '''Hardware<br>revision'''
    454: | KA2DI614-PLUS<br>(invalid FCC id)
    1107: ...132 CPU<br>4MB Flash/32MB RAM<br>U-Boot must be replaced
    1114: ...341 SOC<br>4MB Flash/32MB RAM<br>U-Boot must be replaced
    1121: ...531 SOC<br>4MB Flash/32MB RAM<br>U-Boot must be replaced
  363. Asus RT-AC66U B1 (4,728 bytes)
    1: The Asus RT-AC66U B1 is a hardware revision of [[Asus_RT-AC66U]] that deviates signi...
    3: ...204404/https://wikidevi.com/wiki/ASUS_RT-AC66U_B1 Hardware] Specifications==
    32: ...' Builds for RT-AC68U can be found in the typical place: [[Index:FAQ#Where_do_I_download_firmware.3F|W...
    41: To comply with regulatory amendments, we have modified our...
    43: Please check our official websites for the certified...
  364. Глоссарий (7,710 bytes)
    6: Синонимы: g+ SuperSpeed, G Plus, HSM, 125* High Speed, Turbo G, SpeedBooster, 1...
    10: ...и названиями: g+ SuperSpeed (ZyXEL), G Plus или HSM (Belkin), 125* High Speed или Tur...
    48: ...ние доступом к среде, также Hardware Address, также физический адре...
  365. (Free Generator) Board Kings Hack Tool Gems Mod Generator Cheats No Human Verification iOS Android zr3Eg1FqerSh5Mj (5,660 bytes)
    1: ... in the world, but if no one sees it, no one will play it. invest time and Coins Energy in advertising...
  366. (Premium Tips) Board Kings Cheats Hack Unlimited Gems Mod Generator No Jailbreak or Root No Human Verification UD74sOgTHm1kmZv (2,517 bytes)
    1: ...site, depending on your game platform. Only a few players have access to certain packages (e.g. mobile...
  367. (Premium) Board Kings APK Hack Latest Version 2023 New Generator Gems Mod Cheats for Free NUEOQ11xCEASsE6 (3,692 bytes)
    1: ...ou to create your Coins Energy.Then you can start playing.With a Coins Energy or progress code, you do...
  368. (Latest Cheats) Board Kings Free Gems Mod Generator 999K Gems Mod Free 2023 in 5 minutes 3M7ZkNBzhRVzABF (3,486 bytes)
    1: ...ou to create your Coins Energy.Then you can start playing.With a Coins Energy or progress code, you do...
  369. (Premium Guide) Board Kings Cheats Free Board Kings Generator Working Gems Mod Generator No Human Verification kdDA8zq7qqXo7gX (1,932 bytes)
    1: ... free Coins Energy Generator immediately.The slow hardware update cycle of Coins Energy Generator is ideal f...
  370. D-Link DIR-862L (7,991 bytes)
    7: ...fodepot.shoutwiki.com/wiki/D-Link_DIR-862L_rev_A1 Hardware] Specifications==
    45: ...e firmware, open a web browser such as Internet Explorer and enter: ...
    50: ...It may take up to 5 minutes for the upgrade to complete.
    51: #*Do not unplug, power off, or otherwise disrupt the router whi...
    59: ...e firmware, open a web browser such as Internet Explorer and enter: ...
  371. D-Link DIR-880L (4,344 bytes)
    15: ...https://wikidevi.wi-cat.ru/D-Link_DIR-880L_rev_A1 Hardware Specifications]=
    69: ...-ddwrt.bin files results in a boot loop or brick, please refer to the Recovery section below to enter ...

View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for