Search results
From DD-WRT Wiki
You searched for Hardware/pl
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 100 results starting with #21.
View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).
Article title matches
- LaFonera Hardware Replace LEDs (6,702 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...[[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
7: = Replacing the green LEDs =
8: '''Today we learn how to replace the green LEDs of your LaFonera with blue ones... - LaFonera Hardware Logo-Removal (de) (2,955 bytes)
2: [[Category:LaFonera_Hardware_(de)]]
3: ...Fonera_(de)|LaFonera]] / [[LaFonera_Hardware_(de)|Hardware]] / Logo-Entfernung'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
11: ...ffektivste Weg um das Logo zu entfernen, ohne die Plastikoberfläche Deiner LaFonera zu beschädigen o...
24: ...en der Politur mit einem feuchten Tuch, damit das Plastik nicht angegriffen wird - LaFonera Hardware Logo-Removal (fr) (2,529 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...Fonera_(fr)|LaFonera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''... - LaFonera Hardware (de) (46 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(de)]] - LaFonera Hardware (fr) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(fr)]]''' - LaFonera Hardware 32MB SDRAM MOD (5,063 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / 32MB SDRAM MOD'''
19: ==Removing and replacing ram chips on the Fonera==
23: ... keep the chip on when a little bit of force is applied to the chip. The legs will 'pop' from the pads...
25: Get a sample ChipQuik SMD removal kit. It includes flux and s... - LaFonera Hardware Replace LEDs (de) (6,319 bytes)
1: [[Category:LaFonera_Hardware_(de)]]
2: ...onera]] / [[LaFonera_Hardware_(de)|Hardware]] / Replace LEDs'''
4: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
12: I think it is very simple to do this modification - if you have some solde...
28: [[image:LaFonera_Hardware_Replace_LEDs_-_08_preparation.jpg]] - LaFonera Hardware Replace LEDs (fr) (5,848 bytes)
2: [[Category:LaFonera_Hardware_(fr)]]
3: ...onera]] / [[LaFonera_Hardware_(fr)|Hardware]] / Replace LEDs'''
5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
7: = Remplacer les LEDs vertes =
8: '''Aujourd'hui nous allons voir comment remplacer les LEDs vertes de LaFonera par des bleues.''... - LaFonera Hardware Power from USB (8,045 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power from USB'''
6: ...hat limited by its power supply which needs to be plugged into a wall power socket. Wouldn’t it be n...
8: As we know from looking at the hardware specifications for the LaFonera, it takes DC powe...
10: This mod is quite simple; it requires no modification to the LaFonera, ju... - LaFonera Hardware New Paint Job (1,237 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / New Paint Job'''
8: This is '''SIMPLE''' mod. It shouldn't take you more then 2 Hours ... - LaFonera Hardware IO (en) (4,576 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IO'''
9: ...the time to make a schmatic of the LaFonera yet? Please fill in the
13: ...: http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable and here: http://tech.am/2006/10/06/au...
15: ... Reset TAP in Atheros AR2315 (from: Multiple sources) - LaFonera Hardware Modding (636 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Modding'''
7: [[Image:LaFonera_Hardware_Modding_-_01_front.jpg]]
9: [[Image:LaFonera_Hardware_Modding_-_02_side.jpg]]
11: [[Image:LaFonera_Hardware_Modding_-_03_ahead.jpg]] - Hardware-Specific/zh cn (32 bytes)
- Hardware-specific/zh cn (32 bytes)
- LaFonera hardware New Paint Job (45 bytes)
1: #REDIRECT [[LaFonera Hardware New Paint Job]] - LaFonera Hardware (en) (49 bytes)
1: #REDIRECT [[:Category:LaFonera_Hardware_(en)]]''' - LaFonera Hardware IO (39 bytes)
1: #REDIRECT [[LaFonera Hardware IO (en)]] - LaFonera Hardware Controlling AC-Loads via webinterface (4,497 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-loads via web-interface'''
31: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_04_overvi...
40: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_05_web-in...
46: : [[Image:LaFonera_Hardware_Controlling_AC-Loads_via_webinterface_-_06_web-in... - LaFonera Hardware SD-Card/Reader Position (6,152 bytes)
1: ...ry:LaFonera_Hardware_(en)|Hardware]] / [[LaFonera Hardware SD-Card|SD-Card]] / Reader Position'''
5: [[Image:Fonera_card_reader_complete-top.jpg|thumb|center|658px|Fonera with a blue ...
10: ...ad both) card reader to take apart, or [[LaFonera_Hardware_SD-Card#Cheap_SD_Card_.22reader.22_.28floppy_cabl...
13: ...ng Glue (epoxy resin or similar) OR Self adhesive plastic for a temporary solution.
16: ...fe/Utility knife with a blade sutable for cutting plastic. - LaFonera Hardware LCD Screen (3,119 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / LCD Screen'''
9: [[Image:LaFonera_Hardware_LCD_Screen_-_01_fonera_LCD.jpg]]
12: ...e because of playing with IR receiver. So why not playing with serial 128*128 LCD ?
14: ...nd animations. The uLCD model can only display simple stuff (line, cercle, text) and pixel after pixel... - LaFonera Hardware IR Receiver (4,545 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / IR Receiver'''
8: ...er, a diode, a resistor and a78L05 regulator as explained here. But this wont work with USB/serial ada...
10: ... used with USB/serial and embedded system with simple serial port like… La Fonera.
13: [[Image:LaFonera_Hardware_IR_Receiver_-_01_pcb.jpg]] - LaFonera Hardware LaFoneraPlus (12,883 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...egory:LaFonera_Hardware_(en)|Hardware]] / LaFoneraPlus'''
6: = LaFonera Plus =
7: There is a new Fon router : La fonera+ (plus). This router is quite similar than the classic...
10: [[image:LaFonera_Hardware_LaFoneraPlus_-_01_case.jpg]] - Hardware-specific (5,910 bytes)
1: {{Languages|Hardware-specific}}
3: ...formation. Please also see [[:Category:Networking hardware tutorials]] and [[Supported_Devices]] for links t...
7: =Hardware Brand=
49: *[[Linksys Serial numbers|Identifying Hardware Versions]]
130: *[[Cisco Valet Plus M20]] - OpenVPN Router to Router Bridged Configuration Alternative (Hardware VPN) (5,716 bytes)
1: ...uter to Router Bridged Configuration Alternative (Hardware VPN) ===
2: ...are "like" vpn access for multiple computers or appliances)
6: ...nt side to more than one client, device, and or appliance that does NOT have built in VPN capabilities...
8: '''Examples Include:'''
24: # Port 8080 will be used in this example, change this if you like. - Hardware DIY/ru (33 bytes)
- Hardware DIY/zh cn (541 bytes)
1: {{Languages|Hardware_DIY}}
11: * [[:Category:LaFonera_Hardware_%28en%29|La Fonera的硬件摩丁部落]] - Hardware/ru (2,765 bytes)
1: {{Languages|Hardware}}
51: [[Category:Hardware/ru| ]] - Hardware-specific/fr (567 bytes)
1: {{Languages|Hardware-specific}}
4: ...omplète''' en anglais cliquez sur ce lien : '''[[Hardware-specific]]'''
Page text matches
- ¿Qué es DD-WRT? (4,318 bytes)
3: ...firmware libre bajo los términos de la licencia GPL para la mayoría de los router 802.11g basados en...
9: La nueva versión de DD-WRT (v23) ''es completamente un nuevo proyecto''. DD-WRT ofrece numero...
13: ...ados, y soporte software para la modificación de hardware SD-Card.<br>
30: ...ossary#Client Mode|Modo Cliente]] (soporta muúltiples conexiones de clientes)
39: ...Card|MMC/SD Card Support]] (requiere modificar el hardware) - Kismet on Linux (4,875 bytes)
25: The /tmp directory is the only place on the wrt which is writable as it is stored o...
48: ...ld be different if running another version of the hardware - this works with v2.2 of the wrt54g).
63: If this works, it will display some messages ending with 'Allowing connections...
91: logtemplate=%n-%d-%i.%l
93: logtemplate=%h/%n-%d-%i.%l - Wrt54g kismet with linux server (9,309 bytes)
6: ...d itself. The client is the user interface to display the results on your screen. The server is the ...
12: ...s reported to the user via the client will not display the correct signal strength.
42: The /tmp directory is the only place on the wrt's file system which is writable as ...
56: ...drone and kismet_drone.conf files the the correct place, delete the unwanted files and then make the d...
94: ... machine at a time to connect to the drone and display the results.) - Linksys WRT610N (11,615 bytes)
2: ... was a top-of-the-line consumer Linksys device (replaced by the [[Linksys E3000|E3000]]) with the foll...
10: ...or Broadcom devices. It's responsible for initial hardware configuration and subsequent booting of the (Linu...
26: ... time on your WRT610N, you need to use a trailed (hardware-specific) build:
29: ...s://download1.dd-wrt.com/dd-wrtv2/downloads/'' in place of ''ftp://ftp.dd-wrt.com/''
36: For example, these are 2.4 kernel builds, only for v1 router... - Feature requests (17,201 bytes)
19: ...Content filtering features. (And make it plug and play. Too many linux distributions require the user ...
25: ...mes" in order to save space, and allow people to upload news ones to the jffs parition as needed.
29: ...easily added further downstream, whereas the best place to put VoIP and VPN functions is at the "upper...
31: ...verse proxy (or similar capability) to allow multiple servers behind the router to share a single IP. ...
37: * Allow the router to replace AirPcap: Wireless Packet Capture for Wireshark... - Wiederbeleben (2,917 bytes)
15: ...R am Port 1 per TFTP geflasht werden. Bei einigen Hardware-Revisionen ist der Port 1 am Switch der 4. Slot.
81: [[Category:Flashing networking hardware/de]] - Wiki discussion (5,344 bytes)
4: ...slation and optimisation of Russian part of Wiki, please, link to that new version [[DD-WRT_(RU)]] fro...
7: ...ir models from the current main page. The various hardware specific guides can be found via the Miscellaneou...
21: ...d is [[Glossary:free software|free]] under the [[GPL]].
27: ...s a long one. Is that OK? Do we need a brief explanation and a more detailed one?
33: ...to tell if it's bricked, all the common little complaints etc. But this is almost too large for an FA... - Espanol (5,507 bytes)
1: {{Template:Bienvenido}}
18: ...uración]]''' <br/>Las tareas de configuración explicadas
106: ...ar!#Suministrando Hardware o Dinero|Suministrando Hardware o Dinero]] - USB storage (55,588 bytes)
9: ...then I looked at this guide. It is excessively complex and antiquated in many areas for current versio...
13: ...ready formatted in exFAT and already successfully plugged in and used on a Windows 7 device.
15: Plug the drive into the available USB port.<br>
16: ...the contents the same as you would with Windows Explorer. Reboot if necessary.
26: == Applications == - Wake-on-LAN (tutorial) (10,143 bytes)
4: ...his (especially the latter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers hav...
14: ...atic_DHCP#Configuration|static DHCP]]. In the example below, we assume your router LAN is 192.168.1.x ...
15: ...T device's Web Interface to send test packets, in place of a second PC.
38: * A good place to start is here: [http://www.smallnetbuilder....
47: ...the full path to "/usr/sbin/wol" is important. Simply "wol" will not work. - DD-WRT Docu (FR) (22,239 bytes)
3: {{Template:Bienvenue}}
8: ... une documentation technique et d'installation complète pour le firmware [http://www.dd-wrt.com/ DD-W...
13: ...c], lequel a été construit sur la distribution GPL originale de Linksys et sur d'autres projets open...
14: ==Liste complète des fonctionnalités==
23: ...de client (Support de connexion pour clients multiples) - Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
17: ...e added Buffalo header. After successful transfer please wait 2-3 min., or until router reboots.
56: WLA-G54C hardware versions:
67: ... Reset-button, let it enter troubleshoot mode (couple minutes), then power off second time, and power ...
75: ...ys, ch.6, no encryption). Once you are connected, please telnet to the router and erase nvram (usernam...
77: '''Please note:''' Clearing nvram will also change the ... - DD-WRT Docu (IT) (14,289 bytes)
5: ...bile che siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifi...
16: ...orto software per l'utilizzo di SD-Card (modifica hardware).
27: *Client Mode (supporta client multipli)
57: *il supporto al WRT54G v.5 è stato implementato come da [http://www.bitsum.com/openwiking...
143: ...er alcuni esempi di scripting guarda [[Script Examples]] - VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
11: ...ess which will be your private one wl0. You can apply WPA to this in the usual way. Then set up your f...
13: ... 1 on the screen as this corresponds to port 4 in hardware.
14: * Early hardware: http://www.tonns.org/openwrt/WRTSL54GS_layout_re...
15: * GL hardware: http://garycourt.com/wp-content/images/WRT54_sw2...
58: ...ve not implemented bandwidth shaping nor Hotspot splash page, but it's a start. - TP Link Archer A7v5 (7,003 bytes)
1: ==HARDWARE==
9: This is the placeholder for the A7v5.
10: This is a work in progress by MSOENGINEER, so please be patient while he adds to this device wiki....
12: ...router with Q.o.S. turned on is only good for ISP plans up to 150mbps. YOU'VE BEEN WARNED.
14: ...ster, go back to stock which uses other dedicated hardware inside the A7v5 to improve network translation wh... - Återställ från en dålig flash (907 bytes)
10: [[Category:Flashing networking hardware/se]] - Debugging PPPOE Problems (2,511 bytes)
29: === Uplink ===
59: line should display a session number and the hardware address
62: If your uplink does not work properly or your DSL modem - Useful Scripts (54,380 bytes)
9: ...hould be considered a hack until the feature is implemented permanently.
25: ...if you're receiving segmentation faults or your applications are failing to run, and even then only if...
27: ...e above mentioned way of altering things is to simply copy /etc/profile to /jffs/etc, change PATH and ...
50: Credit to hardwarewizard and frater
106: # example command lines - Recover from a bad flash/it (583 bytes)
12: [[Category:Flashing networking hardware/it]] - Switched Ports (21,983 bytes)
2: <font color=red>'''NOTE: This Wiki applies to DD-WRT versions prior to r46604. DD-WRT r4...
4: This page explains proper command line configuration of VLANs on...
17: ...sical or virtual wireless interfaces using [[Multiple WLANs]].
46: ==Explaining the connection between Hardware, VLANs, and NVRAM Variables==
50: ===Visible Hardware, Internal Ports, and VLANs=== - Afterburner (1,547 bytes)
3: ... available on all DD-WRT enabled G routers. It is hardware independent. Afterburner will only improve speeds...
16: * G Plus
28: ...www.wi-fiplanet.com/news/article.php/3330731 wi-fiplanet.com
31: [[Category:Applications]] - USRobotics USR5461 (11,735 bytes)
5: The major hardware features of USR5461 router are listed in this tab...
7: ... not recognized by DD-WRT firmware. Therefore, in place of the so-called "30/30/30 Reset" which requir...
12: ...ilds (file size about 1700 KB) or DD-WRT '''micro-plus''' builds (file size less than 1870 KB) for ins...
18: Note: In the example bellow we will use Brain Slayer's 13525 build: <...
27: Please, read and understand all instructions in this... - LaFonera Hardware serial to ethernet (1,034 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / serial to ethernet''' - Motorola WR850G (8,284 bytes)
3: The Motorola WR850G is based on very similar hardware to the Linksys WRT54G except that it stores the M...
5: The following instructions will only work with hardware versions v2 and v3 or the WR850G and the WR850GP....
7: ...n though DD-WRT v23 SP1 and later knows about the hardware it is being installed on, you risk bricking the r...
9: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
23: ...e from *ATTENTION - These links are out of date. Please go to the main index, choose downloads, and s... - DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
16: ...r Funktion her ähnlich wie das BIOS in einem PC: Hardwareinitialisierung, interaktive Einstellungen, Betrie...
59: Es gibt keinen GPL-Quell-Code für die Version 4.03. Überprüfe 5.1...
116: ==Hardware==
214: ...feld und <b>nicht Enter drücken</b> - click <b>APPLY</b> stattdessen!<br>
226: Nun kommen wir zum kompliziertem Teil: benutzen Sie die <b>WAN-Nummer für... - WR850G v1 (26,232 bytes)
5: ... to fill them in - but make sure they apply to <b>hardware version 1</b> of the WR850G.</i>
12: ...ortunately, there are a few pitfalls if you own a hardware version 1 (the one with the AC/DC converter in th...
15: ...n't understand what the commands below are doing, please check with a good Linux/Unix textbook first,
18: ... windows, or make your boss angry etc. You are completely on your own!
24: I don't understand yet, hopefully the GPL source of fw 5.13 will give me some clues: all by... - Airodump and using/overriding libraries (6,898 bytes)
1: ...rienced odd errors. In this example, we will be exploring Airodump, a part of the AirCrack package, wh...
16: wget http://downloads.openwrt.org/people/nbd/ar7/packages/aircrack_2.41-1_mipsel.ipk
23: ==Will Aireplay work?==
24: ...ost it! If anyone has any info or wishes to help, please let me know!
27: ...n error, then you're good to go! However, many people will get an error such as this: - Spanning Tree Protocol (29,361 bytes)
7: ...bled repeaters, or in an ad hoc network with multiple ad hoc connections.
67: ...mittant and bugged me greatly, in that I could simply turn off Link3 and have no issues at all for mon...
86: brctl comes with the following options I will explain in a moment
194: ...lue containing the last active flag value (my example indicates a topology change has been detected)
211: ...ercial hardware. Priority is one of the "needs to play nice" ones where the default 100 will make the ... - Point-to-Point PPTP Tunneling usando dos DD-WRT (3,530 bytes)
3: ...siguiente configuracion fue hecha con dos wrt54g (hardware version 2.2) y el firmware "DD-WRT v23 SP1 (04/13...
159: *En el ejemplo el rango de ip que se dio para clientes vpn ("Cl... - Factory Defaults (25,206 bytes)
8: ''Merge needed with [[Hardware#NVRAM]].
14: For example, let's say that Firmware A sets the imaginary va...
27: ...s for it to not actually clear the NVRAM. Many people think of it and phrase it that way. What it is s...
29: .... On some less-supported hardware this may have unpleasant results.
32: ...y other avenue of unbricking should be tried multiple times before resorting to this. - Installation (20,950 bytes)
2: ... DD-WRT on a router in most cases is almost as simple as installing a program onto your computer. Howe...
7: Please check the [https://dd-wrt.com/support/router-...
11: For a list of devices working with DD-WRT, please see '''[[Supported Devices]]'''.
13: ...r a list of devices '''not''' working with DD-WRT please see '''[[Known incompatible devices]]'''.
15: ...Brick_%28electronics%29 Bricking] your router''', please finish reading this entire page first. You w... - Netgear R9000 (8,270 bytes)
2: '''NOTE: This wiki also applies to the R8900 and XR700'''<br>
12: Please note, Wireless-AD (60GHz) support is untested...
14: 10g interface - supported SFP hardware info: [https://forum.dd-wrt.com/phpBB2/viewtopic....
17: =[https://wikidevi.wi-cat.ru/Netgear_R9000 Hardware Specifications]=
72: # You will see a notice about the file you uploaded being older than the firmware currently on t... - Accton (82 bytes)
1: Please refer to [[Installation]] and [[Hardware-specific]] pages for further info. - D-Link (234 bytes)
1: ...Category:Networking hardware tutorials|Networking hardware tutorials]] pages for further info. - Linksys WRT54G v2.2 (1,689 bytes)
3: ==Hardware Specifications==
16: #Click ''Upgrade'' then when complete, wait FIVE FULL minutes
26: #Click ''Upgrade'' then when complete, wait FIVE FULL minutes - USRobotics USR8200 (6,454 bytes)
23: ...uses the telnet interface into the router to accomplish it's task. <br>
52: ....). Use the MAC address at the bottom of the unit plus 3. The one printed on the bottom is for the WAN...
58: *Plug your LAN cable into the WAN port.
110: =Hardware=
149: http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Hardware%282f%29USRobotics%282f%29USR8200.html#head-e0357e... - Linksys WRT54G-TM (9,840 bytes)
8: ...WRT54G-TM and WRT54G-RG are identical in terms of hardware '''but not the firmware''' so the CORRECT FILES M...
20: ...ller to speed up the process, otherwise once you upload the '''CFE_Updater-WRT54G-TM.bin''' you will n...
36: ...able to tell when the router is ready for a TFTP upload.
40: ...go to the Administration Tab - Firmware Upgrade. Upload the '''CFE_Updater-WRT54G-TM.bin''' to the rou...
42: ... the Upgrade button to allow the CFE_Updater to replace the stock CFE on the router and for it to eras... - Verizon FiOS - Using Your Own Router (6,751 bytes)
1: ...torial should be able to help those who want to replace their Verizon-provided Actiontec router with o...
9: ...Coax WAN and Ethernet WAN. This is pretty self-explanatory: coax means the TV type cable, ethernet me...
17: ...f (in case someone gets tangled in it). '''Do not plug in the cable yet.'''
20: ...n't have another means of accessing the Internet, please save yourself some trouble and save the page....
26: #Power off the Actiontec, and plug the Ethernet cable into the Data port of the ON... - LaFonera Hardware i2c (6,202 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / i2c'''
10: [[Image:LaFonera_Hardware_i2c_-_01_overview.jpg]]
12: My kernel implementation use 4 GPIO on SW1 (1-2-5-6) near the Et...
16: ... on i2c-parport-light. Linux i2c stack is very complete, all i have to do is to use bit-banging i2c AP... - What is DD-WRT? (20,620 bytes)
3: ...mware|firmware]] released under the terms of the GPL for many Wi-Fi 4 and Wi-Fi 5 wireless routers bas...
5: ... original [[wikipedia:GNU_General_Public_License|GPL]]'d Linksys firmware and a number of other open s...
11: ... allocation, and software support for the SD-Card hardware modification.<br>
13: The ''DD'' in DD-WRT is the German car numberplate code for Dresden.
36: ! [[:Category:Applications|Serv-<br>ices]] - Version Features (31,493 bytes)
8: ... information about which versions can run on your hardware.
17: | Micro Plus [[Version_Features#Notes|(2)]][[Version_Feature...
18: | Micro Plus ssh [[Version_Features#Notes|(2)]][[Version_Fea...
423: | [[NoCatSplash |NoCat]]
554: | Micro Plus [[Version_Features#Notes|(2)]][[Version_Feature... - WHR-HP-G54 (24,374 bytes)
6: ... actually own or operate a WHR-HP-G54, and can completely test settings. Add any background informatio...
8: * Please include - antenna type, environment (indoor, ...
15: ... a file via web gui with a size of 3817472 Bytes. Please update this with the Maximum file size you ca...
21: ... away than the [[WHR-G54S]] due to the on-board amplifier and BCMxxxxE/EL-series Broadcom 'BroadRange ...
36: hardware watchpoint : no - Hashes & Checksums (15,359 bytes)
2: A hash (or checksum) is a simple type of redundancy check that is used to detect ...
23: ...d installing a handy freeware app named [http://implbits.com/Products/HashTab.aspx HashTab].
25: Once HashTab is installed, simply right-click on the downloaded firmware file, go ...
30: ...Terminal. (It's in the Utilities folder inside Applications.) Type:
237: ...e will be flashed and a checksum error will be displayed at the end, but the router will not reboot in... - ¿Qué es "DD-WRT"? (11,698 bytes)
7: ... su código fuente esta disponible bajo licencia GPL.
10: ...c], que a su vez se basa en el firmware original GPL de Linksys y en otros proyectos. '''DD-WRT''' se ...
24: *<b>Modo Cliente</b> (soporta múltiples clientes conectados)
121: | [[NoCatSplash|NoCat]]
251: ...er - que tiene que pagar los costes del servidor, Hardware y otras cosas. - LaFonera Hardware Coloured Chassis (2,817 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Coloured Chassis'''
15: [[image:LaFonera_Hardware_coloured_chassis.jpg]]
26: From testing on spare plastic I have found that you can get a smooth finis...
33: ...is to prime the surface. (no need to sand because plastic adheres better than metals); - Vxworkskiller de (757 bytes)
1: ...ven Firmware zu flashen ohne auf JTAG oder andere hardware modifikationen zurückzugreifen - Instalación en el enrutador Motorola WR850G (7,207 bytes)
1: El router Motorola WR850G esta basado en hardware muy similar al Linksys WRT54G, excepto que almace...
4: ...ción sobre la version al reverso, esta basado en hardware levemente distinto, y (al menos con DD-WRT v23fin...
6: ...omenzando con algunas versiones v23SP1, conoce el hardware (como detectarlo, que valores de fábrica estable...
10: ...oceso de varios pasos para obtener la versión completa o un solo paso para el firmware "mini". '''Rec...
12: ...e muchas de las funcionalidades de la versión completa y puede ser suficiente para la mayoria de los ... - Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
5: ...o con mi <code>v5</code>. Lo que aquí resumo, simplificando un poco.
42: ...a instalar WRT54G G/GS v5-v6 sin modificación de hardware. (en inglés)
49: ...a.org/wiki/JTAG Cable JTAG]. Este [http://forums.hardwarezone.com/showthread.php?p=18118180#post18118180 li...
58: ...un Cable JTAG]) -- ([http://wiki.openwrt.org/doc/hardware/port.jtag.cables Como hacer un Cable JTAG]).''
69: ...ebricker tool auto detectara el chip de flash. Explicitar los parametros del chip como '/fc:01' rara ... - Netgear WNDR4500 (3,670 bytes)
2: = Hardware Specs = - 什么是 "DD-WRT"? (53,158 bytes)
3: ...第三方[[wikipedia:Firmware|固件]],采用 GPL 协议,支持基于 Broadcom 或 Atheros 芯片...
5: ...是基于 [[wikipedia:GNU_General_Public_License|GPL]] 的 Linksys固件及许多其它开源程序。...
37: ! [[:Category:Applications|Serv-<br>ices]]
125: ...Glossary#Client Mode|Client Mode]] (supports multiple connected clients)
233: ..." | [[Glossary#MMC/SD Card|MMC/SD Card Support]] (hardware modification required) - Optware (46,421 bytes)
7: Please note:
20: ... all required files under /opt with 1000 ported applications. With buildroot toolchain, system library...
21: ...packages, but still far smaller than glibc based aplications.
29: ...package or optware-devel meta package provides complete development toolchain for compiling programs o...
31: ...mended to unmount /jffs and then mount eg. mmc in place of /jffs. - Quick list of Optware packages (104,401 bytes)
11: * alac-decoder - 0.1.0-2 - A decoder for the apple lossless file format
17: ...rver and client library for writing proxy-based applications.
22: ... server technology for embedding in devices and applications. Supports embedded javascript, CGI, Virtu
32: * asterisk-sounds - 1.2.1-1 - Supplementary asterisk-sounds.
43: ...14-moh-freeplay-alaw - 0.0.0-1 - asterisk-moh-freeplay-alaw - Development (20,697 bytes)
17: ...distribution costs and better represent the multi-platform capabilities of this kit, the binary tools ...
19: # A compatible platform. The following are specifically supported (...
30: ..., installing the Mac OS X Developer Tools will supply the needed GNU C and C++ compilers and make util...
68: I've written two scripts that simplify the process considerably. Basically, it's a on...
76: Simply run extract_firmware.sh with the following param... - 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
28: ...e added Buffalo header. After successful transfer please wait 2-3 min., or until router reboots.
69: ... Reset-button, let it enter troubleshoot mode (couple minutes), then power off second time, and power ...
76: ...ys, ch.6, no encryption). Once you are connected, please telnet to the router and erase nvram (usernam...
78: '''Please note:''' Clearing nvram will also change the ...
91: Once the router runs DD-WRT, please use the generic version when upgrading firmwa... - MN-700 (10,914 bytes)
3: ...WRT, a new bootloader must be installed through a hardware hack (until someone comes up with a WinCE killer ...
11: ...re wondering, the MN-500 has completely different hardware than the MN-700, so the instructions provided by ...
14: ...SP2 and eariler are not supported on the MN-700. Please use build SVN 3953 (link below) or higher. Ea...
18: # Follow one (or a combination) of the hardware hack guides listed in the Introduction section ab...
20: # Put the WRT in hardware restoration mode (hold down the reset button whil... - Contribute (3,059 bytes)
6: ...t the development of DD-WRT and how you can help, please visit the [[:Category:Developer resources]] s...
13: * You don't need to know HTML, Wiki is edited in plain text.
14: ...ry fast and categories are auto-updatable. An example for a category can be found on the bottom of thi...
21: ...ainSlayer]] — has to pay server costs, new hardware and, most importantly, food and shelter.
34: The more people we have contributing to the project the better t... - Firmware FAQ (40,468 bytes)
36: ...d-wrt file names for first time flashing- where applicable in the folders).
38: ... many many routers). Always go to the appropriate hardware device forum and look at the recent build reports...
46: ...mware builds are beta releases with no or limited hardware testing. '''Proceed with caution!'''
55: ...'. Always read the newest build thread first. Example: [https://www.dd-wrt.com/phpBB2/viewtopic.php?t=...
72: ...rks OEM fimware that have special procedures to replace the CFE (bootloader). '''To upgrade, use the g... - Known incompatible devices (18,777 bytes)
23: If you bricked your router, please first consult the [[Index:Support|support]] p...
24: ...velopers confirm the incompatibility with DD-WRT, please edit this page.
33: | '''Hardware<br>revision'''
448: | KA2DI614-PLUS<br>(invalid FCC id)
1122: ...132 CPU<br>4MB Flash/32MB RAM<br>U-Boot must be replaced - Bountiful BWRG1000 (105 bytes)
3: [[Category:Networking hardware tutorials]] - Version 5 And 6 Router Information (5,963 bytes)
1: ..., including the most relevant and valuable links. Please add information, including new links you find...
19: For more complete information on hardware revisions, visit Wikipedia:<br/>
20: http://en.wikipedia.org/wiki/Wrt54g#Hardware_revisions
23: ...ons which can result in a freezed router". This applies to all neutered routers.
40: ...connected to any network, even though you have it plugged into the neutered router. - Reset And Reboot (4,732 bytes)
11: ...g in the reset button is to leave a network cable plugged in to your computer and the router, then wat...
16: .... On some less-supported hardware this may have unpleasant results, so use the following two reset met...
17: ... reset, Admin tab, then factory defaults. Click apply and wait 5 min. The router is now reset and shou...
21: ...d have unpleasant results "on some less-supported hardware". - D-Link DIR-615 rev C (10,866 bytes)
4: =Hardware=
6: ...self. This means it's quick and easy to check the hardware revision before buying or borrowing it.
10: ==Pros of this hardware==
13: * Fairly new hardware (released in 2009?), so it's widely available for...
15: * Easy to install DD-WRT on this hardware (just flash through the web interface as per belo... - Internal device network (4,651 bytes)
1: ... internal network connects the internal physical(=hardware):
8: Via the user interface you can modify how the hardware is logically interconnected with each other and w...
16: ...es are limited by the software implementation and hardware.
24: **Please note that the (above) (DD-WRT) [[firewall]] n...
26: ...ll#Network-based_application_firewalls|proxying/application]]/[[wikipedia:Deep packet inspection|deep ... - Miscellaneous/zh cn (971 bytes)
6: ...efinitions and considerable explanations. A great place for reference and general browsing.
10: There are some pages that describe specific hardware with only loose
21: * [[Hardware#NVRAM|NVRAM]]
23: * [[Hardware#Overclocking|路由器超频]]
25: * [[Hardware#Hardware_Modifications|硬件改造]] - LaFonera Hardware SD-Card (6,579 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / SD-Card'''
46: I read on several websites, that some people managed to wire a SD Card (or a MMC) to a Fonera...
50: [[Image:LaFonera_Hardware_SD-Card_-_01_overview.jpg|the finished result]]
57: ... is to locate the SW pins (near the antenna).. simply solder some wires like this: - LaFonera Hardware Power-Sources (2,124 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-Sources''' - Linksys WRT54G/GL/GS/GX (4,360 bytes)
6: ...box or the underside of the router) represent the hardware revision:
23: CDFG = WRT54G v8.0 (purchased 7-16-2007 Hemet Staples)<br>
87: ...neric.bin file....or one of the micro_plus, micro_plus_ssh mentioned above.
132: ...s greater than the CFE imposed maximum of 250mhz, please see [[http://www.bitsum.com/openwiking/owbase... - Linksys WRT54GS v7.0 & 7.2 (5,118 bytes)
3: ==Hardware==
15: '''This flash method applies to EON, INTEL, and SAMSUNG(?) flash chips.'''<...
25: # Unplug the router, then hold the reset button while re...
62: ... I installed from the Linksys GUI Admin options, upload went about half way then tried to reboot, and ... - Installation/ja (27,080 bytes)
15: ...イスの場合、デバイス固有の情報が[[Hardware-specific]]ページで見つかるかもしれま...
24: ...とはいえ、ピーコック スレッドと [[Hardware-specific|ハードウェア固有の情報]]ペ...
26: ...クページの背景を知ったあとでは、[[Hardware-specific|ハードウェア固有の情報]]ペ...
29: * Use the '''brand-specific information in the [[Hardware-specific]]''' page to accurately identify which m...
30: ... and find the files you need. Again, check the [[Hardware-specific]] page for links to detailed instruction... - D-Link DIR-400 (5,069 bytes)
5: ==[https://wikidevi.wi-cat.ru/D-Link_DIR-400_A1 Hardware] Specifications==
66: ...''' and press Enter. Wait until the process is complete:</li>
76: ...ss Enter (this one will take a while. '''DO NOT UNPLUG YOUR ROUTER''')</li> - Gateworks Avila/Cambria Installation (14,682 bytes)
5: ...>Please note: The details in these instructions apply specifically to the GW2348-4 board.
9: ...ies Network Processor boards provide an excellent platform for building high performance
15: ...lling DD-WRT on the GW2348 board is relatively simple. To install the firmware you will need the foll...
17: * DC power supply (12 to 24 V, 1 A)
18: * Coaxial power plug (2.5 mm x 5.5 mm available from Radio... - Linksys WAP54G Hardware Spec (3,039 bytes)
5: Hardware spec:<br>
20: While the howtos and photos needed for the implementation of this module for the models of WRT54G...
36: Power supply:
45: [http://downloads.openwrt.org/people/inh/reference/mmc.gif] - Mikrotik Routerboard RB/532 (3,688 bytes)
6: ...hput Ethernet and wireless based networks. Its simple and robust design ensures reliable non-stop oper...
12: There are 2 versions of the Routerboard 532, the 'plain' 532, and the 532A. The key difference is tha...
22: ''please note, this information was more or less copie...
54: | IDT internal SoC hardware watchdog timer
77: [[Category:Networking hardware tutorials]] - Supported Devices (240,439 bytes)
8: ...may actually be really bad builds for your router hardware and cause a lot of issues.
12: ..."beta" FTP/HTTPS site to see if you can find your hardware.
13: ...ee how they work for a particular piece of router hardware.
14: ...quotes with the word AND (in uppercase) plus your hardware or issue to perform your search.
21: ...ation-to-be-removed-in-firefox-90/ Built-in FTP implementation to be removed in Firefox 90]<br> - AutoAP (11,662 bytes)
65: ...tting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to prefer to connect to a cert...
75: What follows is a complete list of included [[Hardware#NVRAM|NVRAM]] variables and what they do (with de...
87: ...is appended directly, preceeded by a "*key*". Example: "My Home", WEP key:1234567ab -> "My*Home*key*12...
89: :'''nvram set autoap_aplimit="10"'''
97: ...e amount of time to wait for a DHCP renewal to complete. If the routers you're accessing are fairly qu... - Linksys WRTSL54GS (13,481 bytes)
2: ... are open for many different applications of this hardware. - Micro-plus (26,693 bytes)
4: ... micro version. There is also a version of Micro-plus with SSH support.
8: ==Can my device run micro-plus?==
11: ...ces which currently have the ability to run micro-plus must have a small CFE (bootloader) of 128K in s...
14: ....bin''' is '''128K''', you can safely flash micro-plus and enjoy the benefits.
15: #*DO NOT flash micro-plus if your cfe.bin is larger than 128K (most are a... - LaFonera Info Hardware-Specifications (3,830 bytes)
3: ...Fonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications'''
5: == The Hardware Specifications ==
15: * Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, ...
29: * Powersupply: 7.5v, 1A Output
40: LaFonera complies with the following standards: - LaFonera (en) (6,555 bytes)
16: ...=Yast_hardware_info.png | link=:Category:LaFonera_Hardware_(en) | width=48px | height=48px }}
17: ...Fonera_Hardware_(en)|LaFonera Hardware]]''' <br/> Hardware related documentation
19: |style="width:36px;"|{{Click || image=Playground.png | link=LaFonera_TestingArea_(en) | wi...
20: |'''[[LaFonera_TestingArea_(en)|Playground]]''' <br/> Testing area
63: will download the complete source-files in a directory called DD-WRT. - LaFonera Software Flashing (30,993 bytes)
1: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
34: ...P file server] on your Windows machine (it's a simple no-installer-needed HTTP server). If the link do...
36: ...x.bytesex.org/misc/webfs.html webfs] as well. [Simple alternatives welcome]
39: #*Simple TFTP server for Windows: http://www.jounin.net/t...
40: #*If you're running Linux, here's the simplest cross-distribution way to setup a TFTP server ... - LaFonera Hardware Second-Antenna (7,482 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Second-Antenna'''
9: The process should be pretty self explainitory, though I'm sure others may have other th...
19: ... drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to...
24: ...ng is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna c... - LaFonera Hardware JTAG (268 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
4: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / JTAG'''
7: For now take a look at [[LaFonera_Hardware_IO_(en)]] - LaFonera Hardware USB (9,766 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / USB'''
13: ... LaFonera, so read this article first: [[LaFonera_Hardware_Serial-Cable-Port]].
20: * 1x USB type B PCB socket [http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=43990&doy=12...
21: * 1x USB type B plug [http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=12m3&ModuleNo=226... - LaFonera Software Chilispot (12,365 bytes)
17: ...re needed are here and here (only download if you plan to setup a http/ftp server locally, which is ou...
18: ...nd root.fs build of ddwrt for atheros WiSOC based hardware, I used root.fs and vmlinux.bin.l7 ((06/10/07) st...
46: ... SSH. This should work with other firmwares, too. Please change the name server according to your ISP ...
66: 5. Your LaFonera should not be able to completely boot, because the FIS directory will be eras...
78: ... have the first 8 secs to access to RedBoot via a plain Telnet connection. (I would avoid using the bu... - LaFonera Hardware Power-over-Ethernet (3,201 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Power-over-Ethernet'''
8: ...e to use DC/DC-converter inside LaFonera. For example RP10-4805SE from [http://www.recom-international...
12: ...ntical when opened up, same circuit and component placement). This information is based on our experie...
23: ... attached these pairs to the standard 5V power in plug, in the box where the unit is to be mounted. - LaFonera Hardware Serial-Cable-Port (6,917 bytes)
1: [[Category:LaFonera_Hardware_(en)]]
2: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Serial-Cable-Port'''
7: | [[Image:LaFonera_Hardware_Serial-Cable-Port_01.jpg]]
17: See [[LaFonera_Hardware_Disassembling|LaFonera Hardware Disassembling]] for how to dissassemble your rout...
19: [[Image:LaFonera_Hardware_Serial-Cable-Port_02.jpg]] - LaFonera Software Debricking (6,898 bytes)
18: ...d that’s about it. You can find some [[LaFonera Hardware Serial-Cable-Port | instructions for making a ser...
24: Then just take your favorite terminal application and connect to serial port using baud rate...
27: ...er your screen, quickly connect TX line. Other people just tried booting and connecting the serial cab...
60: I played a little with it but in the end had to ask so...
66: ...t even go with the TFTP variant. (Thanx to the people in the comments for pointing out the two easier ... - LaFonera Hardware Disassembling (1,764 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
8: | [[Image:LaFonera Hardware Disassembling 01.png]]
11: Included is a 5 v Ac/Dc converter and a simple user manual.
20: [[Image:LaFonera Hardware Disassembling 02.jpg]] - LaFonera Software Universal-Repeater (25,850 bytes)
10: I placed the files which are nessesary on my websrver ...
28: You can change the file and repost it here, to apply more functionality to this script.
30: ..., but i think some things are not working yet, so please take a look over it to make it working 100%.
168: # nosbeacon disables the use of hardware beacon timers for ath1
347: #simply discover strongest external AP dyanamic IP con... - Siemens SE505 (3,810 bytes)
1: ... follow the guidelines for your specific router. Please see [[Installation]] for more information. R...
9: ...rivial File Transfer Protocol (TFTP) is a very simple Filetransferprotocol.
16: ...o this rule. This can be done by yast oder you simply type as root user:
57: [[Category:Networking hardware tutorials]]
58: [[Category:Hardware]] - Hardware DIY (1,115 bytes)
1: {{Languages|Hardware_DIY}}
3: ==Hardware List==
5: ...the Hardware link at the bottom of the page. Some hardware mods are located on their router's particular wik...
13: [[Category:Hardware]] - SES Button (2,058 bytes)
21: ===Example to test custom button script===
53: [[Category:Networking hardware]] - LaFonera Hardware Cooling-System (11,159 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Cooling-System'''
16: ...nd the life of this nifty little unit we shall simply add a clutch looking fan to the top. (how the fa...
28: *Pliers
51: 3. After making sure you have the right placement on the cover. Transfer the marked hole and... - LaFonera Software Client-Bridge (9,933 bytes)
7: ...less interface (from a host router). You can then plug a device (Laptop, PC, Games console, etc) in to...
11: ...ile shares to be seen in Windows under My Network Places. Your main router also acts as the DHCP issue...
30: HARDWARE - TESTED INFORMATION (MY CONFIGURATION)
42: *3. NOTE: after each PAGE - hit APPLY (wait) before going on to next step - LaFonera Hardware Controlling AC-Loads (4,663 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Controlling AC-Loads'''
13: ...ld process, maybe we could create a controlling application together.
15: == Hardware ==
18: [[image:LaFonera_Hardware_Controlling_AC-Loads_-_01_ready_to_start.jpg]] - LaFonera Hardware Roboter Controlling (2,339 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Roboter Controlling'''
13: ...ld process, maybe we could create a controlling application together.
15: == Hardware ==
16: The complete Robot, ready mounted - front view - How to open my router (2,424 bytes)
19: ..., push straight down and then forward to push the plastic bezel away from the router, as seen in figur...
34: ...n the halves are approximately ¼ inch apart, the plastic strip and AOSS button will lift away from th...
38: ...tom half. As you do this, you will see the clear, plastic LED manifold come into view. Carefully lift ...
52: [[Category:Networking hardware]]
53: [[Category:Hardware]] - Default internal device network (6,480 bytes)
10: ...guration works like this ''(parenthesis are pre-N hardware)'':
12: The internal [[Separate_Lan_and_WLan#Hardware|network switch device]] has 6 [[Switched_Ports|po...
21: ...r via trunking (note that by extension you can completely isolate a network by ''not'' including port ...
25: ...d|wireless part of it]], which adds some extra complexity.
27: ...tween vLan1 ''(vLan0)'' and eth1; rather, '''it employs a [http://linux-net.osdl.org/index.php/Bridge ... - LaFonera Hardware Logo-Removal (2,569 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Logo-Removal'''
5: ...a_Hardware_Logo-Removal_(de)|deutsch]] [[LaFonera_Hardware_Logo-Removal_(fr)|français]]
11: ...e way to get rid of the logo without removing any plastic from the top or creating unnecessary scratch...
23: ...Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with '''... - LaFonera Hardware Replace LEDs (6,702 bytes)
2: [[Category:LaFonera_Hardware_(en)]]
3: ...[[:Category:LaFonera_Hardware_(en)|Hardware]] / Replace LEDs'''
5: ...Replace_LEDs_(de)|deutsch]] [[LaFonera_Hardware_Replace_LEDs_(fr)|français]]
7: = Replacing the green LEDs =
8: '''Today we learn how to replace the green LEDs of your LaFonera with blue ones...
View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).