Search results

From DD-WRT Wiki

You searched for Repeater/se

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 50 results starting with #1.


View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. AP Repeater on DLINK Dir-300 (35 bytes)
  2. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: ..., independent of the SSID and type of encryption used.
    8: ...ct two routers in your home. That is NOT what these instructions are for!''' If you are in the wrong ...
    10: ...der'''. Unlike WDS, once you have this appliance setup, it will work with any open network.
    12: ... space, which is different from address space the repeater connects to.
  3. LaFonera Software Universal-Repeater (25,850 bytes)
    2: ...ory:LaFonera_Software_(en)|Software]] / Universal-Repeater'''
    10: I placed the files which are nessesary on my websrver and made them available to the...
    12: '''To install the script you just run these commands:'''
    30: ...t i think some things are not working yet, so please take a look over it to make it working 100%.
    48: # setup_env. Function that setups environment
  4. Wlan Repeater (9,003 bytes)
    1: {{Languages|Repeater}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater'''
    13: ...ur host-router / AP except that you usually must use WPA2-AES ONLY for dd-wrt to work. Also, some ot...
    14: ...ther unique subnet in your network. If you need a repeater-type solution in the same subnet you are in the w...
    19: *the security settings
  5. Repeater Bridge (20,647 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater Bridge'''
    5: ...t their addresses from a DHCP server in the other segment.
    7: Use a wireless bridge to transparently connect comput...
    9: ==Difference between Station Bridge and Repeater Bridge==
  6. Repeater/fr (31 bytes)
  7. Repeater Bridge/fr (12,531 bytes)
    1: {{Languages|Repeater Bridge}}
    4: ...u de la box). NOUVEAU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil...
    6: ...ent dans un autre segment physique du réseau. Il sera ainsi possible de connecter des ordinateurs sit...
    8: ...uis la version V24 de DD-WRT, les clients peuvent se connecter indifféremment en ethernet ou sans fil...
    11: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
  8. LaFonera Software Wireless-Repeater (2,067 bytes)
    2: ...ware_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
    9: This is a "Repeater Mode"
    20: Fonera settings:
    22: Setup > Basic setup:
    23: ...figuration DHCP (because my primary access point use DHCP)
  9. Repeater (27 bytes)
    1: #REDIRECT [[Wlan Repeater]]
  10. Repeater Bridge/es (30 bytes)
  11. Repeater/es (23 bytes)
  12. Repeater Bridge/ru (1,365 bytes)
    1: {{Languages|Repeater Bridge}}
  13. Repeater Bridge/pt (1,306 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...ainpage]] / [[Linking_Routers|Linking Routers]] / Repeater Bridge'''
    4: ...r os seus endereços de um servidor DHCP em outro segmento.
    6: ...tes diferentes quando não for possível, ou não se queira utilizar cabos.
    8: ...ncipal usando uma conexão a cabo ou uma conexão sem fio.
  14. WDS REPEATER on QCA (97 bytes)
    1: This page is now deprecated, instead see: [[WDS_Linked_router_network|WDS Linked router n...

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    8: Diese Wiki wurde schon lange nicht mehr aktualisiert. V...
    10: Die Community hat wahrscheinlich kein Interesse mehr an einer Deutschen-Wiki.
    15: it seems that the german community is not longer intere...
    19: ...tp://de.wikipedia.org/wiki/Artikel Artikel] verfassen, editieren und diskutieren.<br>
    25: ...c/0,1935,de_de_0_11209_rArNrNrNrN,00.html Gigaset SE505]''), Ravo und Askey unterst&uuml;tzt. Mit der ...
  2. Tutorials (8,775 bytes)
    7: ...gs]] - Info and Recommendations on Basic Wireless settings
    8: ...] - Info and Recommendations on Advanced Wireless settings
    9: ...ss settings]] - Info specific to Qualcomm Atheros settings
    10: ...rom Where do I download dd-wrt, to how do I increase range.
    16: These tutorials have content most new users will understand and be able to deploy. Category...
  3. Station Mode (5,583 bytes)
    4: The secondary (station) router is unbridged in a differe...
    7: ...a separate WAP for multi-radio routers. It is not seen as a WAP, nor accepts wireless connections by o...
    9: ... routers must be on separate subnets, and NAT is used between them. Thus, when port forwarding is need...
    11: ...ation Bridge (Routed)]], [[Repeater Bridge]], or use [[WDS_Linked_router_network|WDS]]. Further explan...
    13: ....</font>''' The other radio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can a ...
  4. Glossary (58,851 bytes)
    10: ... particular term it is best to use your browser's search function.'''
    15: ..., EAP permits the use of a backend authentication server, which may implement some or all authenticati...
    16: - (paraphrased and exerpted from the Internet Engineering Task ...
    19: ... range. Supports transfers up to 11 megabits per second under ideal conditions. Transmission occurs...
    22: ...nown as OFDM allowing it to reach 54 megabits per second under ideal conditions. It requires a radio ...
  5. Wireless Bridge (43,131 bytes)
    6: ...but ***THESE INSTRUCTIONS SHOULD NOT BE USED*** Use the more complete and up to date guide to do the ...
    12: ... via [[Client Mode Wireless]] cannot share a DHCP server.[[Image:standard_bridge_large.jpg|right|thumb...
    14: In the case in which we are interested, a wireless device run...
    17: (Editorial Note: Also see [[Wireless_Bridge#Example|Example]] further down...
    19: ...Client-Bridged" mode. Let's call that WRT54G the secondary.
  6. WAN Port (752 bytes)
    3: When the WRT is used as an Access Point (AP) or repeater (WDS), the WAN port can easily be configured as a...
    5: == Adding WAN Port to LAN Switch to use as an additional, normal LAN port==
    6: ...ate of this article. v2.4, post SP2 firmwares. These steps were done with build 12307 (2009 06 17). Ot...
    9: # Set WAN 'Connection Type' to Disabled.
    10: # Down the Basic Setup page, the option WAN Port appears. Check the b...
  7. DD-WRT Docu (IT) (14,289 bytes)
    5: ...e siano presenti imprecisioni o parti incomplete. Se vuoi puoi provvedere tu stesso alla modifica o in...
    8: ...ue può collaborare a questo lavoro (collettivo). Se vuoi unirti al gruppo, sarai il benvenuto!
    16: ...s più sicure, gestione avanzata del [[Quality of Service]] per l'allocazione della banda, supporto so...
    21: *Server PPTP VPN
    23: *SSH Client e Server ([http://matt.ucc.asn.au/dropbear/dropbear.ht...
  8. DD-WRT Manual (SE) (30,300 bytes)
    1: ...svenska delen av denna wiki är ouppdaterad. För senaste informationen, var vänlig till till den eng...
    19: ...com]. Den första versionen av '''DD-WRT''' var baserad på [http://www.wrt54g.com/ Alchemy Firmware] ...
    25: ...gre trådlös säkerhet, avancerade [[Quality of Service]] kontroller för bandbreddsfördelning, och...
    33: * Asus WL-500G deluxe (sedan 2005-11-01 utgåvan av v23beta2)
    34: * Siemens SE505
  9. Useful Scripts (54,380 bytes)
    1: {{Languages|Useful_Scripts}}
    2: ...iki mainpage]] / [[Index:Scripting|Scripting]] / Useful Scripts
    6: To find out how to load scripts onto the router, see [[Startup Scripts]].
    13: head -n1 /etc/profile | sed s!=!=/mmc/bin:/whatever/bin:! >> /tmp/newProfile
    14: tail -n1 /etc/profile | sed s!=!=/mmc/lib:/whatever/lib:! >> /tmp/newProfile
  10. Station Bridge (Routed) (4,967 bytes)
    9: ...onnection problems for more than a single client. See [[Linking Routers]] for a description of each of...
    11: ...s a wired LAN using a wireless connection, as opposed to an [[Wireless_Access_Point|Access Point]] tha...
    12: ....</font>''' The other radio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can be...
    14: ...clients, all of which will be bridged through the Repeater Bridge device.
    16: ...outers will be at 192.168.1.1, so use something else not in the DHCP range.
  11. What is DD-WRT? (20,620 bytes)
    3: ...L for many Wi-Fi 4 and Wi-Fi 5 wireless routers based on a Broadcom or Atheros chip reference design.
    5: ... the original [[wikipedia:GNU_General_Public_License|GPL]]'d Linksys firmware and a number of other op...
    9: ...devices, or even the firmware available for purchase from Sveasoft. It is also free of the product act...
    11: ...ure wireless communication, advanced [[Quality of Service]] controls for bandwidth allocation, and sof...
    24: For new features, code, and issue tickets, see the SCM and project management at https://svn.dd...
  12. Version Features (31,493 bytes)
    1: ...onfigs, includes, and [https://svn.dd-wrt.com/browser/src/router/rules/ rules] for finer granularity o...
    3: ==Atheros Based Devices (incl. UBNT)==
    5: ... of the firmware available per model. The feature set in Atheros builds are generally limited by the a...
    7: ==Broadcom Based Devices==
    8: ... have several different versions available to choose from. Consult '''Note 4''' in the [http://www.dd-...
  13. 什么是 "DD-WRT"? (53,158 bytes)
    5: ... 又是基于 [[wikipedia:GNU_General_Public_License|GPL]] 的 Linksys固件及许多其它开源程...
    37: ! [[:Category:Applications|Serv-<br>ices]]
    49: | <!-- Services: -->
    61: | <!-- Services: -->
    73: | <!-- Services: -->
  14. Bridging (2,653 bytes)
    7: ...rom a drop down menu on the '''Wireless > Basic Settings''' page.
    9: ...ollowing to determine which type is best for you. See the linked tutorials for information and example...
    16: See [[Client_Bridged]]
    21: ... subnet is created. Wired clients connect to your secondary router. Both routers are in the same LAN.
    25: ... set up port forwarding on your secondary router. Security measures and access limits are controlled b...
  15. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: ..., independent of the SSID and type of encryption used.
    8: ...ct two routers in your home. That is NOT what these instructions are for!''' If you are in the wrong ...
    10: ...der'''. Unlike WDS, once you have this appliance setup, it will work with any open network.
    12: ... space, which is different from address space the repeater connects to.
  16. Firmware FAQ (39,448 bytes)
    6: ...ary|Glossary]]. If you still don't know, search elsewhere on the internet or ask on the forums.
    10: ..._devices|Known incompatible devices]]. Otherwise search the forums.
    18: ... end router, but is no longer manufactured, only used and refurbished units are available.
    19: ... end router, but is no longer manufactured, only used and refurbished units are available.
    25: One can also search on Amazon for [https://amzn.to/3LQ1Ili DD-WRT...
  17. Range Expander (41 bytes)
    1: #REDIRECT [[Universal Wireless Repeater]]
  18. UWR (41 bytes)
    1: #REDIRECT [[Universal Wireless Repeater]]
  19. AutoAP (11,662 bytes)
    5: ...RT54* series routers and their clones. See Links section at the bottom of this page for further infor...
    7: ...ghly configurable, including ability to configure secure connections.
    9: ...d use this script on your router while in [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]], o...
    14: ... use the [[Web Interface]]<br>
    15: ... setup [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]] or...
  20. LaFonera Info Hardware-Specifications (3,830 bytes)
    12: * Antenna Connector: RP-SMA Connector (Reverse SMA)
    17: * Reset Switch
    31: * No extra pad for a second antenna. Possible internal PCB antenna?
    32: ... RX, TX, Power. (I may have RX and TX swapped [[User:Daemondust|Daemondust]] 19:19, 26 Apr 2007 (CEST...
    34: (see http://zone-sys.net/fon2200/)
  21. LaFonera (en) (6,555 bytes)
    13: ...=48px | height=48px }} <!--Feel free to change these icons-->
    24: ...r that the [http://en.wikipedia.org/wiki/FON FON] service utilizes in order to spread Wi-Fi to whereve...
    32: ...ssfully flashed r29218 and have no problems. - [[User:Harre|Harre]] 14:51, 16 March 2016 (CET)
    37: (Note on 2012-01-11) [[User:Alvin|I]] have been running version 12533 for mo...
    39: ...d-wrtv2/down.php?path=downloads%2Fobsolete%2Frelease+candidates%2FDD-WRT+v24+RC5%2FFonera/ 2007-11-23 ...
  22. Routeurs en mode réseau WDS (6,113 bytes)
    1: ...me réseau sans fil. Ceci permet d'étendre le réseau Wifi en utilisant plusieurs routeurs sans néce...
    6: * 3Com OfficeConnect,3CRWE454G72, en mode Repeater
    8: ...om/wiki/index.php?title=WDS_Linked_router_network#Setting_up_WDS_between_a_DD-WRT_router_and_an_Apple_...
    16: ...dimax.com.tw/html/english/frames/b-download.htm Mise à jour firmware]]
    17: ...hack SWA-103 (Waveline Micro AccessPoint) en mode Repeater
  23. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    8: ...10´s of euros each, but might be ideal in this case.
    12: ...t and component placement). This information is based on our experience with the SMC unit.''
    21: ...0m of CAT5. ''(It does run very hot and I'm surprised the box hasn't melted in our summer heat which e...
    23: ... the ethernet connector and we simply attached these pairs to the standard 5V power in plug, in the bo...
    25: ...he power drain cycles when under load and idle cause the voltage to jump too much and inevitably eithe...
  24. LaFonera Software Universal-Repeater (25,850 bytes)
    2: ...ory:LaFonera_Software_(en)|Software]] / Universal-Repeater'''
    10: I placed the files which are nessesary on my websrver and made them available to the...
    12: '''To install the script you just run these commands:'''
    30: ...t i think some things are not working yet, so please take a look over it to make it working 100%.
    48: # setup_env. Function that setups environment
  25. LaFonera (de) (7,731 bytes)
    2: ...indest dich hier: '''[[Main_Page|DD-WRT Wiki Hauptseite]] / LaFonera'''
    10: ...=48px | height=48px }} <!--Feel free to change these icons-->
    17: ...rea_(de)|LaFonera Test Bereich]]''' <br/> Spielwiese
    30: ...d-wrt.com/dd-wrtv2/down.php?path=downloads%2Frelease+candidates%2FDD-WRT+v24+RC2%2FFonera/ DD-WRT v24 ...
    39: ...em Test der vielen Beta-Versionen von DD-WRT erweisen sich oben genannte als die am meisten in den For...
  26. LaFonera (fr) (6,073 bytes)
    10: ...=48px | height=48px }} <!--Feel free to change these icons-->
    21: ...dia.org/wiki/FON FON] utilise dans le but de diffuser du WIFI dans les lieux où ils sont installés.
    28: ....com/dd-wrtv2/down.php?path=downloads%2Fbeta+releases%2Ffonera+builds%2F2007+-+0323/ 03/23] - Mode Cli...
    30: ....com/dd-wrtv2/down.php?path=downloads%2Fbeta+releases%2Ffonera+builds%2F2007+-+0310/ 03/10] - Mode Cli...
    32: ....com/dd-wrtv2/down.php?path=downloads%2Fbeta+releases%2Ffonera+builds%2F2007+-+0218/ 02/18]
  27. Wlan Repeater (9,003 bytes)
    1: {{Languages|Repeater}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater'''
    13: ...ur host-router / AP except that you usually must use WPA2-AES ONLY for dd-wrt to work. Also, some ot...
    14: ...ther unique subnet in your network. If you need a repeater-type solution in the same subnet you are in the w...
    19: *the security settings
  28. LED Scripts (37,693 bytes)
    5: To find out how to load scripts onto the router, see [[Startup Scripts]].
    9: ...ch GPIO's control which LED's on Broadcom devices see [[Broadcom_detection#We_finally_installed_DD-WRT...
    13: You can't use the GPIO's on Atheros chips (Fonera, Meraki, etc....
    17: Pin Direction Name Use
    23: GPIO 5 Output ADM_EEDI (Unknown) Seems to cycle all LED colors disabled.
  29. Repeater Bridge (20,647 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater Bridge'''
    5: ...t their addresses from a DHCP server in the other segment.
    7: Use a wireless bridge to transparently connect comput...
    9: ==Difference between Station Bridge and Repeater Bridge==
  30. VPNC (17,424 bytes)
    1: vpnc is supposed to work with:
    2: *Cisco VPN concentrator 3000 Series
    7: == This describes how to use DD-WRT to connect to a Cisco VPN Concentrator usi...
    8: ...nc and find out the correct settings before they use the script with auto-reconnect.
    9: ...ter to automatically reconnect on connection loss see further down
  31. Changelog (7,371 bytes)
    1: See the [http://svn.dd-wrt.com/timeline Timeline] fo...
    3: == v24 SP2 (preview release) ==
    9: ...detected and proper LED/Reset button functioning (see [[Supported Devices]]).
    14: ...]], [[Repeater Bridge]], and [[Universal Wireless Repeater]] modes
    15: ** Default Wireless TX Power increased to 70mW (from 28mW)
  32. Repeating Mode Comparisons (6,438 bytes)
    4: ...stribution System) vs ''R'' (Repeater) vs ''RB'' (Repeater Bridge) ==
    6: ...elated to repeating using "WDS" vs "Repeater" vs "Repeater Bridge" modes.
    7: Please note that some lines still require confirmation (...
    8: ...our results differ from those indicated here, please add comments providing your HW and DD-WRT version...
    10: ... WDS and R/RB (both R and RB), the repeater and base can broadcast different SSIDs.
  33. Linking Routers (4,395 bytes)
    4: See also: [https://www.dd-wrt.com/wiki/index.php/Cat...
    6: This tutorial discusses various alternatives for linking routers to crea...
    9: ...nts. For a visual comparison between these modes, see [[Repeating_Mode_Comparisons#Router_Mode_Compari...
    13: ... on the same network segment, and will be able to see one another in Windows Network. This works with...
    17: === Repeater / Repeater Bridge ===
  34. Repeater Bridge/fr (12,531 bytes)
    1: {{Languages|Repeater Bridge}}
    4: ...u de la box). NOUVEAU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil...
    6: ...ent dans un autre segment physique du réseau. Il sera ainsi possible de connecter des ordinateurs sit...
    8: ...uis la version V24 de DD-WRT, les clients peuvent se connecter indifféremment en ethernet ou sans fil...
    11: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
  35. Repeteur sans fil (12,493 bytes)
    1: ...u de la box). NOUVEAU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil...
    3: ...ent dans un autre segment physique du réseau. Il sera ainsi possible de connecter des ordinateurs sit...
    5: ...uvelle version V24 de DD-WRT, les clients peuvent se connecter indifféremment en ethernet ou sans fil...
    8: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
    10: Dans le cas qui nous intéresse, le routeur secondaire sous DD-WRT est configuré en Répéteur ...
  36. Station Bridge (5,355 bytes)
    10: ...onnection problems for more than a single client. See [[Linking Routers]] for a description of each of...
    12: ...s a wired LAN using a wireless connection, as opposed to an [[Wireless_Access_Point|Access Point]] tha...
    13: ....</font>''' The other radio(s) would normally be set as ''AP''. For example, the 2.4GHz radio can a ...
    14: ...c.php?p=1128573#1128573 will usually crash] in these modes.
    16: ...outers will be at 192.168.1.1, so use something else not in the DHCP range.
  37. LaFonera Software Wireless-Repeater (2,067 bytes)
    2: ...ware_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
    9: This is a "Repeater Mode"
    20: Fonera settings:
    22: Setup > Basic setup:
    23: ...figuration DHCP (because my primary access point use DHCP)
  38. Repeater (27 bytes)
    1: #REDIRECT [[Wlan Repeater]]
  39. 教程 (8,580 bytes)
    13: * [[Advanced_wireless_settings/zh_cn|无线高级设置]]
    22: * [[DNSMasq as DHCP server|用DNSMasq 作DHCP服务器]]
    32: ...ex.php?n=Milkfish-dd.RouterConfiguration Milkfish Setup]
    47: * [[ProFTPd Server|proftpd的服务器]] (And some other good to...
    48: * [[Quality of Service]] (QoS)
  40. 桥接 (2,407 bytes)
    3: ...rom a drop down menu on the '''Wireless > Basic Settings''' page.
    8: ...ollowing to determine which type is best for you. See the linked tutorials for information and example...
    12: ... subnet is created. Wired clients connect to your secondary router. Both routers are in the same LAN.
    16: ... set up port forwarding on your secondary router. Security measures and access limits are controlled b...
    18: ...either your main router or your secondary router (repeater bridge).
  41. 连接路由器 (1,174 bytes)
    3: ... routers in order to create wifi networks or just repeaters.
    15: * [[http://dev.wifidog.org/wiki/doc/gateway-server/WifiDogAndOlsr|WifiDog + OLSR]]
    19: * [[Repeater Bridge]] - DHCP Server & NAT <u>disabled</u>, clients on <u>same sub...
    20: * [[Universal Wireless Repeater]]
    21: * [[Repeater]] - DHCP Server & NAT <u>enabled</u>, clients on <u>different...
  42. Remote Access (1,381 bytes)
    4: ...P and port number, as you will need to specify those in order to connect from a remote location.
    9: ===Repeater===
    10: ...er forward that port to the WAN IP address of the Repeater.
    12: ===Repeater Bridge===
    13: ...uter, forward port X to the LAN IP address of the Repeater Bridge, where X = 22 for SSH, 23 for Telnet, 80 f...
  43. Linking Subnets with Static Routes (4,896 bytes)
    4: ...ubnets is called routing, and the interfaces you use should be unbridged to do it correctly.
    11: * Set the wireless interface to 'Unbridged'
    16: ==Baseline Reference Example==
    18: ...ter2 and/or Router3 could also be using Client or Repeater mode (not bridged!).
    24: ...ubnet addresses invisible on their WAN side. Because each router has an interface connected to the 192...
  44. Basic Wireless Settings (24,713 bytes)
    1: {{Languages|Basic Wireless Settings}}
    3: = Basic Wireless Settings =
    7: Note, if you do not see a certain setting on your router, it may be on a different scr...
    9: ...|Advanced Wireless Settings]] for the rest of the settings not found on this page.
    13: ...'Available Settings:''' 115+ different countries (several countries share the same regulations)
  45. Linksys WRT54G v2.0 (9,258 bytes)
    5: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router
    6: #Set a static IP on your computer (e.g. 192.168.1.7, ...
    8: ...e router (unplug the power from the router for 30 seconds and then plug it back in)
    9: ... and NOT a page that says Management Mode. If you see management mode, power cycle the router again.
    10: #Leave the username blank and enter "admin" as the password
  46. Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
    1: ...or:red; font-weight:bold'>'''WARNING''' - Do not use V24 RC6.X builds on the WRT v1.X units. There is ...
    7: ... HTML GUI and Microsoft Internet Explorer Web browser:
    11: ...or 30 seconds (I didn't cycle power or anything else on the router.)
    12: # Then I got the DD_WRT GUI. I reset it to factory defaults with the GUI, although th...
    13: # Upgrade to DD-WRT v23sp2_standard_generic. I selected the "restore factory defaults after flashin...
  47. D-Link DIR-600vB / 300vB (9,032 bytes)
    31: ...0_rev_A| well documented elsewhere]]. Rev B1 is based on Ralink RT3050 SoC and from all accounts, incl...
    33: ...rsion is also stuck on the bottom of the router itself. This means it's quick and easy to check the ha...
    35: ...ctory default IP for this router is 192.168.0.1, user is "admin", password is blank.
    38: * 4 MB board, so no need to use "micro" DD-WRT builds.
    40: ...d amount were sold, they are fairly easy to find used.
  48. Asus RT-N16 (18,355 bytes)
    5: ...n IPv4 SPI firewall. For speed tests without SFE, see [[Asus_RT-N16#Performance|Performance]].
    60: ...ewtopic.php?t=51486 Peacock announcement thread]. See [[Index:FAQ#Where_do_I_download_firmware.3F|Wher...
    63: :* Restore Factory Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]])
    65: :* Restore Factory Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]]) or via DD-WRT webGUI
    68: ...3F|Where do I download firmware]] for links and research New Build and model-specific threads.
  49. Linksys WRT320N v1.0 (5,706 bytes)
    8: *Flash/RAM: 8MB (serial) / 32MB
    17: ...s not work" for more info regarding how to hard reset this unit.'''
    21: *After initial flash, upgrades can use any non-trailed generic (not nv60k nor nv64k) K2....
    22: ...ini_wrt320n.bin), then from the Linksys webgui, reset to defaults.
    23: #Router default address is 192.168.1.1: Set your pc to a static IP e.g. 192.168.1.6 subnet 2...
  50. Что такое DD-WRT? (41,715 bytes)
    13: ...ствованную систему [[Quality of Service]] для распределения кана...
    32: *[[Glossary#DHCP Server|DHCP Server]] ([http://udhcp.busybox.net/ udhcp] or [http...
    42: *[[Glossary#OpenVPN| OpenVPN Client & Server]] (only in -vpn build of the firmware)
    45: *[[Glossary#PPTP VPN Server & Client|PPTP VPN Server & Client]]
    57: *[[Glossary#Secure Shell|SSH server & client]] ([http://matt.ucc.asn.au/dropbear/...

View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for