Search results

From DD-WRT Wiki

You searched for Repeater/it

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below 87 results starting with #1.


View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. AP Repeater on DLINK Dir-300 (35 bytes)
  2. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: A repeater is just a very normal client which, at the same t...
    8: ...ATE instructions for creating a special UNIVERSAL repeater as explained below, not for linking the routers y...
    10: ...once you have this appliance setup, it will work with any open network.
    12: ... space, which is different from address space the repeater connects to.
  3. LaFonera Software Universal-Repeater (25,850 bytes)
    2: ...ory:LaFonera_Software_(en)|Software]] / Universal-Repeater'''
    6: ...a nice webpage for the original fonera-firmware. With the script "ponte2" universal repeating should b...
    8: ...t I think the basic functionality is running, but it should be tested and some things should be change...
    26: ...eating will be created. You can start the script with the command: "sh universalRepeating"
    28: ... file and repost it here, to apply more functionality to this script.
  4. Wlan Repeater (9,003 bytes)
    1: {{Languages|Repeater}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater'''
    11: ...s NOT for WIRED connections between two routers! It is a wireless connection only.
    14: ...ther unique subnet in your network. If you need a repeater-type solution in the same subnet you are in the w...
    19: *the security settings
  5. Repeater Bridge (20,647 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater Bridge'''
    5: ...e in the same subnet and look like two Ethernet switches connected by a cable to all computers on the ...
    9: ==Difference between Station Bridge and Repeater Bridge==
    11: ... still connect clients to your main router using either a cable connection or a wireless connection.
  6. Repeater/fr (31 bytes)
  7. Repeater Bridge/fr (12,531 bytes)
    1: {{Languages|Repeater Bridge}}
    6: ...sera ainsi possible de connecter des ordinateurs situés dans un local et d'autres dans un local dista...
    8: Mais un Pont sans fil standard a une limitation en ce que le segment de réseau créé autou...
    11: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
    23: ...igurer le routeur sous DD-WRT en Répéteur pont (Repeater Bridge).
  8. LaFonera Software Wireless-Repeater (2,067 bytes)
    2: ...ware_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
    9: This is a "Repeater Mode"
    25: Router Name : Whatever you want..i used Repeater
    40: Regulatory Domain: (ITALY)
    47: Wireless > Wireless Security
  9. Repeater (27 bytes)
    1: #REDIRECT [[Wlan Repeater]]
  10. Repeater Bridge/es (30 bytes)
  11. Repeater/es (23 bytes)
  12. Repeater Bridge/ru (1,365 bytes)
    1: {{Languages|Repeater Bridge}}
    10: [[Category:Switch/ru]]
  13. Repeater Bridge/pt (1,306 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...ainpage]] / [[Linking_Routers|Linking Routers]] / Repeater Bridge'''
    4: ...am na mesma sub-rede e irão aparecer como dois switches Ethernet conectados por um cabo para todos os...
    14: [[Category:Switch/pt]]
  14. WDS REPEATER on QCA (97 bytes)

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    10: Die Community hat wahrscheinlich kein Interesse mehr an einer ...
    15: it seems that the german community is not longer interested in this german-wiki.
    19: ....wikipedia.org/wiki/Artikel Artikel] verfassen, editieren und diskutieren.<br>
    25: ...aset SE505]''), Ravo und Askey unterst&uuml;tzt. Mit der Version V24 werden neue Geräte, auf dem 802....
    29: ...deen ausgetauscht, so dass beide von einander profitieren.
  2. Tutorials (8,775 bytes)
    32: *[[Easy torrenting with dd-wrt]]
    39: *[[Itunes remote]]
    41: *[[Linking Routers]] - WDS, Repeaters, OLSR, etc.
    45: *[[Multiple WLANs]] - Add additional SSID's
    48: ...s_with_netflow_and_ntop Network traffic analysis with netflow and ntop]
  3. Station Mode (5,583 bytes)
    4: ...tion) router is unbridged in a different subnet (with NAT), while a [[Client_Bridge|Station Bridge]] o...
    7: ...ports, or a separate WAP for multi-radio routers. It is not seen as a WAP, nor accepts wireless connec...
    9: ...etween them. Thus, when port forwarding is needed it must be configured at both routers - not just on ...
    11: ...m), [[Client_Bridged|Station Bridge (Routed)]], [[Repeater Bridge]], or use [[WDS_Linked_router_network|WDS]...
    25: ...ecific one (i.e. the primary router, instead of a repeater), enable MAC Filtering on the Wireless Tab, and a...
  4. Glossary (58,851 bytes)
    10: '''If you are looking for a particular term it is best to use your browser's search function.'''
    15: ...ay implement some or all authentication methods, with the authenticator acting as a pass-through for s...
    19: ...fers up to 11 megabits per second under ideal conditions. Transmission occurs over 20 MHz of bandwid...
    22: ...conditions. It requires a radio capable of transmitting in this range. This was ratified by the IEEE...
    28: ...fers up to 54 megabits per second under ideal conditions. 802.11g equipment can typically operate in 8...
  5. Wireless Bridge (43,131 bytes)
    6: ... an older page on how to set up a client bridge. It is being kept as there might be info that some fi...
    12: ...eating two separate subnets. Since the computers within the different subnets cannot see each other di...
    17: ... for a better documented but lengthier procedure with some unnecessary steps.)
    19: ...ireless > Basic Settings). The following assumes it has the default IP address 192.168.1.1. Let's ca...
    22: ... Annoying! -- This doesn't seem to be a problem with the currently [http://www.dd-wrt.com/phpBB2/view...
  6. WAN Port (752 bytes)
    3: When the WRT is used as an Access Point (AP) or repeater (WDS), the WAN port can easily be configured as a...
    5: == Adding WAN Port to LAN Switch to use as an additional, normal LAN port==
    6: ... v2.4, post SP2 firmwares. These steps were done with build 12307 (2009 06 17). Other firmware builds ...
    10: ...Port appears. Check the box 'Assign WAN Port to Switch'.
  7. DD-WRT Docu (IT) (14,289 bytes)
    5: ...alla modifica o inviare una mail a maddler@dd-wrt-it.net. Grazie per la collaborazione.
    8: Nello spirito del Wiki e dell'Open Source chiunque può collab...
    13: ...ibile dalla collaborazione all'interno della comunità! Chiunque può scrivere, modificare e commentar...
    16: ...wireless più sicure, gestione avanzata del [[Quality of Service]] per l'allocazione della banda, supp...
    18: ==Funzionalità==
  8. DD-WRT Manual (SE) (30,300 bytes)
    10: ...de av samarbete! Alla är tillåtna att skriva, editera och kommentera artiklar.
    16: ...PG|thumb|Det nuvarande DD-WRT v23/v24 webbgränssnittet]]
    21: ...dyrbara firmwaren från Sveasoft. De är också fritt från produktaktiveringar eller spionfunktioner ...
    25: ...för högre trådlös säkerhet, avancerade [[Quality of Service]] kontroller för bandbreddsfördelni...
    62: ...ww.TZO.com/ TZO], [http://www.ZoneEdit.com/ ZoneEdit])
  9. Useful Scripts (54,380 bytes)
    4: ...th DD-WRT, giving it more features or customizing it towards your needs.
    9: ...ver you like. Have a good reason for doing this, it should be considered a hack until the feature is ...
    25: ...ative. Also note that if you're attempting this with [[Optware]], the files are ld-opt.so.conf and ld...
    33: ...ge everythings that suite your needs and save it with :x)
    41: ...hings like ls, cat, cp, etc, than you'll want to either adjust the above commands, or else put those t...
  10. Station Bridge (Routed) (4,967 bytes)
    9: ... hack and not a true transparent bridge like WDS. It will cause connection problems for more than a si...
    14: ...clients, all of which will be bridged through the Repeater Bridge device.
    32: #* Uncheck "Use DNSMasq for DNS", "DHCP-Authoritative", "Forced DNS Redirection"
    37: # Go to ''Security -> Firewall'' and disable SPI firewall [http://w...
    42: #* Hit SAVE (not apply)
  11. What is DD-WRT? (20,620 bytes)
    9: ...he firmware available for purchase from Sveasoft. It is also free of the product activation or trackin...
    11: ...ore secure wireless communication, advanced [[Quality of Service]] controls for bandwidth allocation, ...
    26: ...;" border=1 cellspacing=0 cellpadding=3 class="wikitable sortable"
    34: ! [[:Category:Monitoring|Moni-<br>toring]]
    46: | <!-- Monitoring: -->
  12. Version Features (31,493 bytes)
    1: ...rowser/src/router/rules/ rules] for finer granularity of available features.
    5: ...unit's version may slightly differ from another unit's version.
    12: ...;" border=1 cellspacing=0 cellpadding=3 class="wikitable"
    101: | Bandwidth Monitoring
    616: | [[Linking_Routers |Repeater]]
  13. 什么是 "DD-WRT"? (53,158 bytes)
    27: ...;" border=1 cellspacing=0 cellpadding=3 class="wikitable sortable"
    35: ! [[:Category:Monitoring|Moni-<br>toring]]
    47: | <!-- Monitoring: -->
    59: | <!-- Monitoring: -->
    71: | <!-- Monitoring: -->
  14. Bridging (2,653 bytes)
    12: ... LAN. The subnet LAN has clients connected to it with cable connections. (On the firmware page, the me...
    25: ...secondary router. Security measures and access limits are controlled by your main router.
    28: ...Many problems occur, so you should stay away from it. Better use Atheros [[WDS#Atheros]]
    32: =Repeater Bridge=
    33: ...either your main router or your secondary router (repeater bridge).
  15. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: A repeater is just a very normal client which, at the same t...
    8: ...ATE instructions for creating a special UNIVERSAL repeater as explained below, not for linking the routers y...
    10: ...once you have this appliance setup, it will work with any open network.
    12: ... space, which is different from address space the repeater connects to.
  16. Firmware FAQ (40,468 bytes)
    14: OpenVPN support requires routers with at least 8mb flash, and for better speeds use AR...
    31: ...d_Devices|Supported Devices]]. There are routers with DD-WRT preinstalled, but they tend to be more ex...
    36: ...device wiki or a specific forum topic, specific initial flash instructions to use an older/very specif...
    41: ...[[Version Features]] feature differences (needs editing).
    43: *Atheros and Ralink routers use custom builds with a varying feature sets: do not ask for a differe...
  17. Range Expander (41 bytes)
    1: #REDIRECT [[Universal Wireless Repeater]]
  18. UWR (41 bytes)
    1: #REDIRECT [[Universal Wireless Repeater]]
  19. AutoAP (11,662 bytes)
    5: ...AP since 2009-07-13. This add-on was originally written for Broadcom Linksys WRT54* series routers and...
    7: ...paremeters are highly configurable, including ability to configure secure connections.
    9: ...d use this script on your router while in [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]], o...
    12: :''Before using this guide, it is recommended that you know how to:<br>''
    15: ... setup [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]] or...
  20. LaFonera Info Hardware-Specifications (3,830 bytes)
    10: * Ethernet: (1x) Altima AC101 (10/100 Mbit/s) [Auto-MDI(X)]
    17: * Reset Switch
    40: LaFonera complies with the following standards:
    45: * Humidity: 5% to 95% (Non-condensing)
    60: * Siemens Gigaset Wlan repeater 108
  21. LaFonera (en) (6,555 bytes)
    34: ...676 and beyond) are broken and do not boot, necessitating recovery via Redboot.
    37: ... been running version 12533 for months at a time with no major issues,
    53: ...n the forums / have least buggy features. As of writing the latest Fonera DD-WRT version was 04/25.
    56: ...t time, follow the [[LaFonera_Software_Flashing|Initial Flashing]] guide.
    65: ...red to OpenWrt Kamikaze with only 60MB. Kamikaze with all packages and source tarballs downloads about...
  22. Routeurs en mode réseau WDS (6,113 bytes)
    1: ... Wifi en utilisant plusieurs routeurs sans nécessité de les relier entre eux par de câbles. Un mail...
    3: ...WRT, ce mode fonctionne avec les niveaux de sécurité WEP, WPA et WPA2 activés. Allez toutefois jete...
    5: =Produits supportés=
    6: * 3Com OfficeConnect,3CRWE454G72, en mode Repeater
    8: * [http://www.dd-wrt.com/wiki/index.php?title=WDS_Linked_router_network#Setting_up_WDS_betwee...
  23. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    6: Someone should find some information or write a little tutorial.
    8: ...df/powerline/RP10_E.pdf Recom]. These units are quite expensive, several 10´s of euros each, but migh...
    12: ...rmation is based on our experience with the SMC unit.''
    15: ...too. We are pretty sure you'll fry your LaFonera with 12V, let alone 48V.
    18: ...gh CAT5. 12V 1A should be sufficient to run the unit at up to 160m of CAT5.
  24. LaFonera Software Universal-Repeater (25,850 bytes)
    2: ...ory:LaFonera_Software_(en)|Software]] / Universal-Repeater'''
    6: ...a nice webpage for the original fonera-firmware. With the script "ponte2" universal repeating should b...
    8: ...t I think the basic functionality is running, but it should be tested and some things should be change...
    26: ...eating will be created. You can start the script with the command: "sh universalRepeating"
    28: ... file and repost it here, to apply more functionality to this script.
  25. LaFonera (de) (7,731 bytes)
    2: ...dest dich hier: '''[[Main_Page|DD-WRT Wiki Hauptseite]] / LaFonera'''
    21: ...rma [http://de.wikipedia.org/wiki/FON FON] Ihren Mitgliedern zur Verfügung stellt um ein flächendeck...
    25: * [[:Category:LaFonera_(de)|Alle Kategorien]] mit Informationen über Deine LaFonera
    39: ...enigsten fehlerhaften Funktionen. Zum aktuellen Zeitpunkt ist die letzte Version vom 20.06.2007.
    44: ...stmalig gegen DD-WRT auszutauschen, folge der Anleitung zum [[LaFonera_Software_Flashing|erstmaligen f...
  26. LaFonera (fr) (6,073 bytes)
    38: ..., suivez ce guide: [[LaFonera_Software_Flashing|Initial Flashing]] .
    52: ...le svn, mais je n'ai pas pu vérifier si tout était compilable.
    62: * FTP-Server,SAMBA, Bit-Torrent-Client
    64: ...rfaces virtuels pour perturber les lamer à proximité ;)
    66: ...s" -> QoS: 4 ports ethernet pour ajuster les priorité (et seulement 1 port sur la Fonera ;) )
  27. Wlan Repeater (9,003 bytes)
    1: {{Languages|Repeater}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater'''
    11: ...s NOT for WIRED connections between two routers! It is a wireless connection only.
    14: ...ther unique subnet in your network. If you need a repeater-type solution in the same subnet you are in the w...
    19: *the security settings
  28. LED Scripts (37,693 bytes)
    9: ...o you will likely need to change the scripts to suit your model. To detect which GPIO's control which ...
    11: '''The example LED scripts below are usually written using the GPIO info for the Linksys WRT54G. Re...
    13: ...e other utility. PROC_GPIO is a driver, and thus it must be compiled for your specific kernel. Broad...
    20: GPIO 2 Output ADM_EECS (LED - white, Cisco button v. 3.0+)
    29: Here is a short summary of my experiments with WRT150N v1.1 on dd-wrt.v24_mini_generic firmware...
  29. Repeater Bridge (20,647 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater Bridge'''
    5: ...e in the same subnet and look like two Ethernet switches connected by a cable to all computers on the ...
    9: ==Difference between Station Bridge and Repeater Bridge==
    11: ... still connect clients to your main router using either a cable connection or a wireless connection.
  30. VPNC (17,424 bytes)
    1: vpnc is supposed to work with:
    4: *Cisco PIX / ASA Zecurity Appliances
    7: ...ncentrator using vpnc without auto-reconnect and without connect on startup==
    8: ... the correct settings before they use the script with auto-reconnect.
    11: ...re is currently no gui for this, but don't worry, it won't be complicated.
  31. Changelog (7,371 bytes)
    14: ...]], [[Repeater Bridge]], and [[Universal Wireless Repeater]] modes
    24: ** Support for devices with 128MB RAM ([http://svn.dd-wrt.com/browser?rev=92...
    27: ** Additional themes/styles for the [[Web Interface]]
    30: *'' Bandwidth Monitoring and Traffic Graphs'':
    32: ** monitor multiple interfaces
  32. Repeating Mode Comparisons (6,438 bytes)
    4: ...stribution System) vs ''R'' (Repeater) vs ''RB'' (Repeater Bridge) ==
    6: ...elated to repeating using "WDS" vs "Repeater" vs "Repeater Bridge" modes.
    10: * On both WDS and R/RB (both R and RB), the repeater and base can broadcast different SSIDs.
    11: ** On WDS with WPA, both routers need to have the same SSID (TO...
    13: ...ning the main-router, but also be repeated by the repeater (TODO: Confirm).
  33. Linking Routers (4,395 bytes)
    9: ...(or a modem), besides the default gateway router with wireless access points. For a visual comparison ...
    10: ...ed mode to extend a wired network using wireless with two or more routers.'''
    12: === Access Point / Switch ===
    13: ...in Windows Network. This works with all devices with LAN ports, and does not require dd-wrt to be ins...
    15: * [[Switch]] - Similar config as WAP, but radio disabled (...
  34. Repeater Bridge/fr (12,531 bytes)
    1: {{Languages|Repeater Bridge}}
    6: ...sera ainsi possible de connecter des ordinateurs situés dans un local et d'autres dans un local dista...
    8: Mais un Pont sans fil standard a une limitation en ce que le segment de réseau créé autou...
    11: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
    23: ...igurer le routeur sous DD-WRT en Répéteur pont (Repeater Bridge).
  35. Repeteur sans fil (12,493 bytes)
    3: ...sera ainsi possible de connecter des ordinateurs situés dans un local et d'autres dans un local dista...
    5: Mais un Pont sans fil standard a une limitation en ce que le segment de réseau créé autou...
    8: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
    20: ...igurer le routeur sous DD-WRT en Répéteur pont (Repeater Bridge).
    28: ...econdaire fonctionne sous DD-WRT V24 dans le mode Repeater Bridge
  36. Station Bridge (5,355 bytes)
    10: ... hack and not a true transparent bridge like WDS. It will cause connection problems for more than a si...
    14: ...and is not fixable]. While it can sometimes work without encryption, there is no guarantee nor officia...
    33: #* Uncheck "Use DNSMasq for DNS", "DHCP-Authoritative", "Forced DNS Redirection"
    38: # Go to ''Security -> Firewall'' and disable SPI firewall [http://w...
    44: ...eless -> Wireless Security'' and enter the ''Security Mode'' and other information same as Primary rou...
  37. LaFonera Software Wireless-Repeater (2,067 bytes)
    2: ...ware_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
    9: This is a "Repeater Mode"
    25: Router Name : Whatever you want..i used Repeater
    40: Regulatory Domain: (ITALY)
    47: Wireless > Wireless Security
  38. Repeater (27 bytes)
    1: #REDIRECT [[Wlan Repeater]]
  39. 教程 (8,580 bytes)
    28: * [[Itunes remote|iTunes遥控器]]
    48: * [[Quality of Service]] (QoS)
    49: * [[Repeater Bridge|中继桥接]]
    63: * [[Switched Ports|用VLANS重新配置交换机的端口]...
    89: * [[Dual WAN with one as standby backup]]
  40. 桥接 (2,407 bytes)
    10: ... LAN. The subnet LAN has clients connected to it with cable connections. (On the firmware page, the me...
    16: ...secondary router. Security measures and access limits are controlled by your main router.
    18: ...either your main router or your secondary router (repeater bridge).
    20: ...e of your radio bandwidth will be consumed by the repeater function.
    25: ...des not discussed here are '''AP, Adhoc''' and''' Repeater'''. Although these modes employ the router's radi...
  41. 连接路由器 (1,174 bytes)
    3: ... routers in order to create wifi networks or just repeaters.
    14: * [[Mesh Networking with OLSR]]
    19: * [[Repeater Bridge]] - DHCP Server & NAT <u>disabled</u>, cli...
    20: * [[Universal Wireless Repeater]]
    21: * [[Repeater]] - DHCP Server & NAT <u>enabled</u>, clients on ...
  42. Remote Access (1,381 bytes)
    6: ===Switch/Wireless Access Point===
    7: ...er, forward port X to the LAN IP address of the Switch/WAP, where X = 22 for SSH, 23 for Telnet, 80 fo...
    9: ===Repeater===
    10: ...er forward that port to the WAN IP address of the Repeater.
    12: ===Repeater Bridge===
  43. Linking Subnets with Static Routes (4,896 bytes)
    1: {{Languages|Linking Subnets with Static Routes}}
    4: ... the interfaces you use should be unbridged to do it correctly.
    8: ...lt only the WAN port is unbridged while the LAN switch (which is a hardware bridge) and wireless inter...
    10: Ways to create additional subnets include:
    12: * Configure VLAN's if your switch supports them
  44. Basic Wireless Settings (24,713 bytes)
    7: ...n your router, it may be on a different screen or it is not supported. If in doubt, ask on the forums.
    17: ...er plus antenna gain, example: * 20 dBm TX power with a 10 dBi gain antenna has an EIRP of 30 dBm.
    18: * 24 dBm TX power with a 6 dBi gain antenna has an EIRP of 30 dBm.
    22: ...36 dBm while its max allowed TX power is 30 dBm, with Canada selected and antenna gain at 0 dBi, the r...
    32: ...vides Dynamic Frequency Selection (DFS) and transmit Power Control (TPC) to the IEEE 802.11a MAC.''
  45. Linksys WRT54G v2.0 (9,258 bytes)
    8: ...ower from the router for 30 seconds and then plug it back in)
    13: #Hit upgrade
    14: ...u get a message that the upgrade is successful, wait FIVE FULL minutes before continuing.
    19: ...tially I used the version as indicated above, but it was unstable. My ISP provides a download speed of...
    26: ...f course we know it does. As for the instructions it gave that he refers to, they were not very clear,...
  46. Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
    1: ... that you will brick your V1.x unit by installing it..</div>
    5: ...'</big></font> '''During configuration or while writing to Flash memory, the only things that should b...
    7: ...P2 images. The following sequence was performed with the HTML GUI and Microsoft Internet Explorer Web...
    8: # Restore factory defaults with the original firmware.
    9: ...int carefully, as not all firmware versions work with all hardware versions.
  47. D-Link DIR-600vB / 300vB (9,032 bytes)
    18: !Switch:
    31: ...ld [[D-Link_DIR300_rev_A|DIR-300 Rev A]] router, its install procedure is already [[D-Link_DIR300_re...
    33: ... the hardware revision before buying or borrowing it.
    42: ...sh firmware. Translation: You're unlikey to brick it.
    45: ...[Repeater Bridge]] mode, which is similar, but a bit more complicated to set up.
  48. Asus RT-N16 (18,355 bytes)
    5: ...peeds with an IPv4 SPI firewall. For speed tests without SFE, see [[Asus_RT-N16#Performance|Performanc...
    47: !Switch Chip
    56: ...s shows the main board for the Asus RT N16 along with the location for the ''[[JTAG]]'' headers.]]
    64: :* Install the INITIAL trailed build '''22118 K2.6_mini_RT-N16.trx'''...
    71: #Download the INITIAL trailed DD-WRT firmware: [https://download1.dd...
  49. Linksys WRT320N v1.0 (5,706 bytes)
    14: *Switch: Broadcom BCM53115
    15: *WAN/LAN: 4 / 1 (Gigabit ethernet)
    17: ... for more info regarding how to hard reset this unit.'''
    20: *For initial flash, a trailed build (with the model in the file name) is '''required''': [...
    21: *After initial flash, upgrades can use any non-trailed generi...
  50. Что такое DD-WRT? (41,715 bytes)
    13: ...ршенствованную систему [[Quality of Service]] для распределения ...
    35: ...ww.tzo.com/ TZO], [http://www.zoneedit.com/ ZoneEdit], custom, and others)
    54: *Show Status of Wireless Clients and WDS with System Uptime/Processor Utilization
    55: *[[Glossary#Site Survey|Site Survey]]
    58: ... scripts ([http://wrt-wiki.bsr-clan.de/index.php?title=Startup_Scripts startup script])
  51. Linksys WRE54G (1,698 bytes)
    2: ...sys. It uses the WDS protocol and is compatible with a number of Linksys routers and access points us...
    11: Only the revision 1 hardware is compatible with DD-WRT at this time. Marvell has not released d...
    13: ...st generic Broadcom builds under 2MB (after the initial flashing).
    26: == Additional Information ==
    27: ... 2MB of ROM, it has 16MB of RAM, which could make it useful for running services.
  52. Firmware FAQ/zh cn (35,646 bytes)
    39: *'''Buffalo [http://fyad.org/109tk WHR-HP-G54]''' It has better range than the Linksys routers due to ...
    40: *'''Asus WL-500G''' It has USB ports that can be used for network attach...
    42: ...s support the 802.11N standard and have gigabit switches. They can run dd-wrt mega and have USB. Use ...
    44: ...falo is not shipping 802.11a/b/g devices in the United States (legal problem). [http://www.buffalotech...
    66: ...r the active network connection. You should find it on the fifth line!
  53. Www coverage (2,543 bytes)
    2: ...q=DD-WRT%2Crockbox google trends DD-WRT compared with e.g. RockBox]
    9: .../article.php/3885061 Create Your Own VPN Server with DD-WRT]
    14: ...ge Your Home Wi-Fi Performance, and Boost Reliability]
    15: ...atest-Hits-DD-WRT.htm Wi-Fi Planet’s Greatest Hits: DD-WRT]
    24: ....php/10724_3655041_2 DD-WRT Tutorial 5: Wireless Repeater]
  54. Enlazando routers (3,056 bytes)
    12: === Access Point / Switch ===
    15: ...figuración similar a WAP, pero con radio deshabilitado (acepta solo conexiones por cable)
    18: ...ando un segundo router. El segundo router no necesita ninguna conexión por cable.
    19: ...do</u>, clientes en <u>misma subred</u> del AP anfitrión (router primario). Esto es, todas las comput...
    20: ...u>, clientes en <u>diferente subred</u> del AP anfitrión (router primario). Las computadoras no se pu...
  55. Repetidor Puente (12,373 bytes)
    1: {{Languages|Repeater Bridge}}
    2: Traducción del artículo [[Repeater Bridge]] del wiki de DD-WRT en inglés <tt>--0...
    7: ...gmentos están en la misma subred y parecen dos switches ethernet conectados por un cable a todos los ...
    9: ...quiere- tender un cable ethernet entre las dos habitaciones.
    13: ...puente inalámbrico ''standard'' es que sólo permite a los clientes por cable conectarse al router se...
  56. QCA wireless settings (60,838 bytes)
    11: ...hp?t=47708 this thread] for some info about VAPs with Qualcomm Atheros.
    20: ...her options if you are advanced and know you need it
    23: ... equivalent to Broadcom & Mediatek's Repeater and Repeater Bridge modes.
    41: ... -> N-Only if all you use is 802.11n clients for either of them. For 802.11a/n 5 GHz radios, Mixed & N...
    45: ...tandard with 20Mhz wide bands and 54Mbit upper limit (legacy mode)
  57. Repetidor (11,082 bytes)
    1: {{Languages|Repeater}}
    2: Traducción del artículo [[Repeater]] del wiki de DD-WRT en inglés <tt>--15 Julio...
    11: ...cer cambios en la configuración del router/AP anfitrión aunque algunas revisiones o ajustes pueden s...
    12: ... misma subred estás en el lugar equivocado. Necesitas leer primero [[Enlazando_routers|Enlazando Rou...
    15: ...as saber las credenciales de acceso del router anfitrión:
  58. Repeater Bridge/ru (1,365 bytes)
    1: {{Languages|Repeater Bridge}}
    10: [[Category:Switch/ru]]
  59. AutoAP/zh cn (11,622 bytes)
    2: ...paremeters are highly configurable, including ability to configure secure connections.
    4: ...常情况下,你需要将本脚本用于[[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]]...
    7: :*[http://hi.baidu.com/lqqql77/blog/item/3881112cf7b88532359bf716.html autoap.sh脚本...
    45: ...rent, rename it to <code>autoap.sh</code> and put it into <code>/jffs/</code> using [[SSH]].
    52: :* After you have it working, [[SSH]] can be disabled.
  60. Advanced wireless settings/zh cn (56,094 bytes)
    9: ...s to cause problems. This should be left to auto with current builds.
    12: * Allows either Open System or Shared Key authentication to be...
    14: '''How it works:'''
    19: ...it default key to encrypt the challenge text, and it sends the encrypted text to the access point.
    20: ...ey. The access point compares the decrypted text with the original challenge text. If the decrypted te...
  61. What is DD-WRT?/pt (52,338 bytes)
    8: Atualmente a DD-WRT é disponível gratuitamente, porem um modelo diferente de negócio est...
    10: ... não são encontradas em firmwares OEM nos dispositivos, ou mesmo em firmwares disponíveis para comp...
    13: ...ção de banda para controles avançados de [[Quality of Service]] (Qualidade do Serviço) e suporte a...
    18: =Requisitos=
    21: ...or Linksys WRT54G/GL/GS ou outro roteador [[Dispositivo Suportado|suportado]].
  62. DD-WRTとは何ですか? (57,691 bytes)
    13: ...]]、バンド幅割り当ての為の拡張[[Quality of Service]]制御、SDカードハードウェ...
    25: ...;" border=1 cellspacing=0 cellpadding=3 class="wikitable sortable"
    33: ! [[:Category:Monitoring|Moni-<br>toring]]
    45: | <!-- Monitoring: -->
    57: | <!-- Monitoring: -->
  63. TP-Link TL-WDR3600 (9,665 bytes)
    11: ...y.tp-link.com/us/home/kb/detail/398 TP-Link Community > Knowledge Base > Updating Your Firmware]<br>
    12: ...y.tp-link.com/us/home/kb/detail/542 TP-Link Community > Knowledge Base > Upgrading Your Router Firmwar...
    25: ...om/phpBB2/viewtopic.php?t=179126 TL-WDR3600 intermittent slowdown WIRED]<br>
    31: ...=258441 TPLINK TL-WDR3600 v1 slow usb disk read/write]<br>
    32: ...ic.php?t=259152 Problem with WDR3600 when other Switch is Uplinked to Port]<br>
  64. What is DD-WRT?/fr (53,667 bytes)
    9: ...he firmware available for purchase from Sveasoft. It is also free of the product activation or trackin...
    11: ...firmware, by its very nature, will contain bugs. It is not recommended to install beta firmware on la...
    13: ...ore secure wireless communication, advanced [[Quality of Service]] controls for bandwidth allocation, ...
    15: What does dd stand for in dd-wrt? Sash: its the german car numberplate code for Dresden.
    26: ...;" border=1 cellspacing=0 cellpadding=3 class="wikitable sortable"
  65. À propos de DD-WRT (56,213 bytes)
    2: ...uteurs ieee802.11a/b/g/h/n conçus autour de circuits intégrés Broadcom ou Atheros.
    4: ...'s software de commencer à faire payer leur produit, fermant ainsi la porte à l'Open Source.
    6: ...ment, bien qu'un modèle économique différent soit [http://forum.bsr-clan.de/ftopic4612.html à l'...
    8: ...s obligations d'activation et de traçage du produit mise en œuvre par Sveasoft .
    12: ...res, des réglages de [[Quality of Service|qualité de service ]] pour l'allocation de bande passan...
  66. FON Failover Router (7,655 bytes)
    1: ...n cable connection, and now has a FON connection within reach, courtesy of his neighbours on BT.
    3: ..., I wanted a solution that would (eventually) permit failover routing for the whole network, wired and...
    5: '''Prerequisites:'''
    8: * Third-party hotspot (BTWiFi or FON) within wireless range
    9: * Secondary repeater to connect to the public access hotspot, also run...
  67. Repeater Bridge/pt (1,306 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...ainpage]] / [[Linking_Routers|Linking Routers]] / Repeater Bridge'''
    4: ...am na mesma sub-rede e irão aparecer como dois switches Ethernet conectados por um cabo para todos os...
    14: [[Category:Switch/pt]]
  68. Netgear WNR2000v3 (8,712 bytes)
    1: ...rmation which is now being asked in forum posts quite frequently.
    5: ...tures), RAM and gigabit Ethernet which don't make it a great candidate. However if you still want to f...
    9: ...nal archived DD-WRT support forum which has the initial support announcement/details]
    13: ...itable for flashing due to the space limitations. Its been reported that build 26446 also works as the...
    19: ...ccept DD-WRT with a small subset of the firmware, it is compiled as a .img as this is the firmware ext...
  69. Guest Network (7,869 bytes)
    4: ...LAN (local network), thereby protecting your security.
    7: ...ccess (''Multiple DHCP Server'' is not available with the WAN disabled). '''In the DD-WRT GUI:'''
    13: ...new "Virtual Interface" (e.g. wl1.1), preferably with WPA2-AES
    15: *In ''Additional DNSMasq Options'', add the IP address and ra...
    22: ...easy Guest Network capability to DD-WRT starting with build 23020. See [[Guest WiFi + abuse control fo...
  70. KRACK Vulnerability and DD-WRT (9,266 bytes)
    2: ...with WPA2 and see the unencrypted data going over it.
    3: ...NOT support 802.11r-2008 Fast Roaming which means it's server code is not vulnerable. (many commercia...
    7: While it is true that these same issues exist on WiFi netw...
    14: ==Location of vulnerability in DD-WRT==
    15: DD-WRT vulnerability depends on the router model version's chipset.
  71. Firmware FAQ/ja (38,399 bytes)
    27: *It does '''NOT''' have Recommended Builds, and the f...
    31: *Atheros and Ralink routers use custom builds with a varying feature sets: do not ask for a differe...
    32: *Note: Atheros and Ralink routers with 4mb flash will '''not''' have features like Hots...
    34: ... with no or limited hardware testing. '''Proceed with caution!'''
    39: *https://secure.dd-wrt.com/site/support/other-downloads?path=betas
  72. Соединение маршрутизаторов (8,260 bytes)
    14: * [[Switch|Коммутатор]] (англ. Switch) - аналогично точке беспро...
    18: ...тель в режиме моста]] (англ. Repeater Bridge) - беспроводной повтори...
    19: ...ь]] (или ретранслятор, англ. Repeater) - беспроводной повторител...
    20: ...торитель]] (англ. Universal Wireless Repeater) - использует сценарий кома...
    33: * [[Mesh Networking with OLSR]]
  73. Объединение сегментов сети статическими маршрутами (9,854 bytes)
    3: {{Languages|Linking Subnets with Static Routes}}
    20: ...та (Client mode) или повторителя (Repeater mode) (без сетевого моста!).

View (previous 500) (next 500) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for