Search results

From DD-WRT Wiki

You searched for Nvram

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 250 results starting with #1.


View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    427: ...!''' Er bewirkt das Löschen der Einstellungen im NVRAM und setzt die DD-WRT-Firmware auf Standard-Werte ...
    459: ...stration/Backup] und dort unter "[http://routerip/nvrambak.tgz HERE (gilt nur für DD-WRT-Versionen)]...
    560: * Sollten Probleme auftreten, könnte das NVRAM gelöscht werden müssen. Öffnen Sie...
    562: <pre>mtd erase nvram</pre>
    565: wget http://openwrt.inf.fh-brs.de/~nbd/nvram-clean.sh
  2. Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
    495: nvram set clkfreq=240
    496: nvram commit
    500: nvram get clkfreq ODER cat /proc/cpuinfo ODER nvram show | grep clkfreq
  3. Alphabetischer Index (1,432 bytes)
    47: *[[DD-WRT_Doku_(DE)#NVRAM|NVRAM]]
  4. Static PPTP VPN Client (18,072 bytes)
    101: You will need to enable JFFS through nvram '''AND''' via the web interface - this was the on...
    114: nvram set rc_startup="sh /jffs/etc/config/my_startup.sh...
    115: nvram commit
    223: ...low using 10.177.0.0 and 255.255.0.0 (no need for nvram if you complete step 9)
  5. Tutorials (8,775 bytes)
    122: *[[Jffs|JFFS - Using nvram to enable Jffs]]
  6. Hardware (18,720 bytes)
    4: ==NVRAM==
    5: NVRAM (non-volatile RAM) also called flash space is the...
    11: *Show the whole NVRAM content:
    12: nvram show
    14: ...ch_pattern> (useful for quickly finding things in NVRAM):
  7. Recover from a bad flash (41,673 bytes)
    38: ...lue exists in the NVRAM. Here simply clearing the NVRAM should solve the problem.
    198: ...AM (the usual cause of the problem) wrt54g -erase:nvram
    203: ...is utility. You are better off flashing the CFE & NVRAM files & then using the normal TFTP method to flas...
    207: ...your hardware. Use the CFE editing tool "IMGTOOL_NVRAM" available from [http://www.bitsum.com/openwiking...
    256: ...rrupt NVRAM settings, this will help us clear the NVRAM. You won't lose your ability to reflash with DD-W...
  8. Glossary (58,851 bytes)
    376: === NVRAM ===
    379: ...[[Hard reset or 30/30/30]]). To erase the entire NVRAM chip with [[Glossary#JTAG|JTAG]] would actually ...
    381: See [[Hardware#NVRAM|NVRAM]] for more info.
  9. WDS Linked router network (21,712 bytes)
    141: ...mpts to save NVRAM files, e.g. nvram_host.bin and nvram_client.bin. These can be restored if the new setu...
  10. Linksys EA6500 V1 (23,843 bytes)
    313: ...o consider. I suggest keeping hard resort/erasing NVRAM as a last resort and if possible try a TFTP inste...
    332: ...ade_from_the_CLI | ABOVE]]]</strong></font> Erase NVRAM by:
    334: #::erase nvram</pre>
    358: ..._or_30/30/30 | 30-30-30/hard reset]] to clear the NVRAM variable that might have broken your setup. This ...
    383: ===Decrease NVRAM size===
  11. Telnet/SSH and the command line (18,436 bytes)
    22: ... set (via telnet or ssh) the sshd_authorized_keys nvram variable.
    24: nvram set sshd_authorized_keys=key1 key2 key3 etc
    63: root@wrt54g:~# nvram set sshd_authorized_keys='ssh-rsa AAAAB4NfaC3yc5 ...
    64: root@wrt54g:~# nvram commit
    240: ...''nvram show'' which list some 800-1200 lines. ''nvram show | more'' will list the results 1 page at a t...
  12. Wl command (24,951 bytes)
    432: print nvram variables to stdout
    434: Use '''nvram show'''!
    437: get the value of an nvram variable
    440: set an nvram variable
  13. Заводские установки (28,571 bytes)
    5: == NVRAM ==
    7: ''Нужно объединить с [[Hardware#NVRAM]].
    9: ...у перезагрузками. Данные в NVRAM также сохраняются между об...
    11: ...димо сбрасывать состояние NVRAM при перепрошивке, чтобы но...
    16: ...роисходит запись настроек NVRAM в двоичный файл. Из-за этог...
  14. Ipkg (tutorial) (10,613 bytes)
    107: nvram set rc_startup=/jffs/etc/init.d/*
    140: nvram set sys_enable_jffs2=1
  15. Iptables command (26,660 bytes)
    179: iptables -I INPUT -p tcp -m tcp -d `nvram get lan_ipaddr` --dport 22 -j logaccept
    180: ...an_ipaddr` --dport 2222 -j DNAT --to-destination `nvram get lan_ipaddr`:22
    224: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 8000 -j DNAT --to 192.168...
    229: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
    233: ... -t nat -I PREROUTING -p tcp -s 123.45.67.89 -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
  16. Quality of Service (14,843 bytes)
    147: ...wnlink` `nvram get wshaper_uplink` `get_wanface` `nvram get wan_mtu` 0
    152: ...link` `nvram get wshaper_downlink` `get_wanface` `nvram get wan_mtu` 0
    157: ...nvram set wshaper_downlink='''[downlink rate]'''; nvram set wshaper_uplink='''[uplink rate]''';
    158: ...nvram set wshaper_downlink='''[downlink rate]'''; nvram set wshaper_uplink='''[uplink rate]''';
    165: ..."red">If you need to alter down/up rates edit the nvram variables before restarting wshaper</font>
  17. Index:Misc/ja (966 bytes)
    18: * [[Hardware#NVRAM|NVRAM]]
  18. Separate LAN and WLAN (outdated) (15,234 bytes)
    37: Set the ''lan_ifname'' nvram variable to vlan0
    42: commit to nvram
    86: nvram set lan_ifname=vlan0
    87: nvram commit
    121: option dns $(nvram get wan_dns)
  19. IPv6 (tutorial) (36,148 bytes)
    99: * This guide only relies on nvram variables, so that '''jffs is not needed'''.
    635: ...soft.org/projects/ipv6/ipv6.html IPv6 Setup using NVRAM]
    740: ... up IPv6 using Hurricane Electric on DD-WRT v23 - NVRAM]
  20. Scripting (1,005 bytes)
    8: ... rely heavily on the javascript dd-wrt libraries, nvram program and on generic linux commands. Every rout...
    12: * [[Startup Scripts]] - web-GUI method, NVRAM method, and more
  21. Miscellaneous (1,602 bytes)
    34: * [[Hardware#NVRAM|NVRAM]]
  22. Startup Scripts (8,579 bytes)
    25: ...rtup'' variable in flash memory (also known as an NVRAM variable). Since flash memory doesn't get erased ...
    33: =NVRAM Method=
    45: nvram set rc_startup="
    52: When you give the command ''nvram commit'' the ''rc_startup'' variable is saved in ...
    54: nvram commit
  23. Samba filesystem (12,586 bytes)
    34: nvram set samba_user="username"
    35: nvram set samba_password="password"
    37: ...re -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  24. Journalling Flash File System (15,008 bytes)
    91: nvram set jffs_mounted=1
    92: nvram set enable_jffs2=1
    93: nvram set sys_enable_jffs2=1
    94: nvram set clean_jffs2=1
    95: nvram set sys_clean_jffs2=1
  25. OpenVPN (29,209 bytes)
    127: ...CATE-----</tt> is necessary; as it is stored in [[nvram]], everything else from that file should be remov...
    186: ...CATE-----</tt> is necessary; as it is stored in [[nvram]], everything else from that file should be remov...
  26. Static DHCP (7,133 bytes)
    43: nvram set static_leasenum=X (where X is the total numbe...
    44: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
    57: nvram set static_leasenum=X (where X is the total numbe...
    58: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
    62: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
  27. Bootvorgang (68,911 bytes)
    97: 0x003f0000-0x00400000 : "nvram"
    250: nvram NVRAM utility.
    339: ==='''nvram'''===
    342: CFE> help nvram
    346: NVRAM utility.
  28. Firewall Builder (7,019 bytes)
    37: ..., because you don't want to store the data in the NVRAM now, but in the jffs file system)
    45: nvram set rc_firewall=/jffs/firewall/firewall.fw
    47: nvram commit
  29. Beschreibung der einzelnen Einstellungen (25,263 bytes)
    170: ...lan.de/index.php?title=DD-WRT_Doku_%28DE%29#NVRAM nvram] anzeigen lassen.
    325: ...://192.168.1.1/nvrambak.tgz http://<YourRouterIP>/nvrambak.tgz] in den Browser heruntergeladen werden.<br...
    326: ...://192.168.1.1/nvrambak.bin http://<YourRouterIP>/nvrambak.bin]
  30. Linksys WRT610N (11,615 bytes)
    11: root@ap-ssn:~# '''nvram show|egrep 'bootnv|pmon''''
    101: nvram set safe_mode_upgrade=on
    102: nvram commit
    132: nvram set "pci/1/1/macaddr"=00:90:4C:D6:02:2a
    133: nvram commit
  31. JTAG-adapter (3,810 bytes)
    60: ...you can modify are cfe (the broadcom bootloader), nvram (the system nonvolatile ram), kernel(the system) ...
    63: ...easiest way to debrick is to erase the kernel and nvram. After a powercycling the router it will wait for...
  32. JTAG-adapter/de (3,751 bytes)
    7: ... ganz gezielt bestimmte Bereiche (CFE, Kernel und NVRAM) des Intel-Flash-Chips zu sichern, löschen oder ...
    58: <pre>./wrtjtag -erase:nvram</pre>
    61: Es wird nun der NVRAM-Bereich gelöscht. Nach erfolgreichem Löschen de...
  33. Transparent web proxy (7,628 bytes)
    42: LAN_IP=`nvram get lan_ipaddr`
    43: LAN_NET=$LAN_IP/`nvram get lan_netmask`
  34. USB storage (55,588 bytes)
    388: ... mount a partition, and run a boot-script file in NVRAM
    435: You need to add the ''mount'' command to the NVRAM stored startup script, only add "&" to the end of...
    438: ...e|Option 3C.2]] for further example of using this NVRAM boot script method.
    465: Save in NVRAM using web-GUI -> Administration -> Commands
    594: ...a)''' Start your extra software directly from the NVRAM stored commands (see [[Startup_Scripts]]), or bet...
  35. Simple Network Management Protocol (12,816 bytes)
    40: nvram set snmpd_conf="syslocation <your_location>
    48: nvram commit
  36. DNSMasq als DHCP Server (3,337 bytes)
    41: echo -ne `nvram get lan_ipaddr` >> /etc/hosts
    42: echo -e "\t"`nvram get router_name` >> /etc/hosts
  37. DNSMasq as DHCP server (15,841 bytes)
    59: Use NVRAM for client lease DB enabled DNSmasq does not star...
  38. HTTP Redirect (3,828 bytes)
    30: nvram set http_redirect_enable=0
    31: nvram commit
  39. NoCatSplash (16,616 bytes)
    122: ...also have to type "nvram set NC_Verbosity=3" and "nvram commit"<br/>
    144: ; nvram entries:
    145: nvram show | grep NC
  40. Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
    4: ...leshooting section, and then issuing a 'mtd erase nvram' command. Then you can overwrite OpenWRT with DD-...
    67: ... use troubleshoot-mode and it kind of repairs the NVRAM... (worked for me, Esa Häkkinen 2006-02-02 <esa....
    73: ...ter (username: root , password: admin , mtd erase nvram [enter], reboot [enter].
    75: ...ram (username: root , password: admin , mtd erase nvram [enter], reboot [enter]. This will bring back the...
    77: '''Please note:''' Clearing nvram will also change the MAC addresses from 00:07:40:...
  41. VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
    28: nvram set vlan0ports="1 2 3 5*"
    29: nvram set vlan2ports="0 5*"
    31: nvram set rc_startup='
    44: nvram set rc_firewall='
    50: nvram commit
  42. Separate LAN and WLAN (5,383 bytes)
    13: nvram get wl0_ifname
  43. TP Link Archer A7v5 (7,003 bytes)
    44: ...eset the router, telnet in and issue the command "nvram erase && reboot" without the quotes.
  44. Mesh Networking with OLSR (6,999 bytes)
    185: <pre>iptables -t nat -A POSTROUTING -o $(nvram get wan_ifname) -j MASQUERADE
    186: ...m get eth1_netmask) -d $(nvram get eth1_ipaddr)/$(nvram get eth1_netmask) -j MASQUERADE
    187: ...ram get lan_netmask) -d $(nvram get lan_ipaddr)/$(nvram get lan_netmask) -j MASQUERADE
  45. DD-WRT Manual (SE) (30,300 bytes)
    208: ...an (observera att manualens sätt att nollställa NVRAM minnet, att hålla reset knappen intryckt i 15 se...
    319: ...nvändarnamn: root , lösenord: admin , mtd erase nvram [enter] , reboot [enter].
    321: ...nvändarnamn: root , lösenord: admin , mtd erase nvram [enter], reboot [enter]. Detta kommer väcka upp ...
    323: '''OBS:''' Att nollställa nvram kommer även att ändra MAC adressen från 00:07:...
  46. Useful Scripts (54,380 bytes)
    77: ...LL - Location & Name of script File with all nvram variables
    78: ... - Location & Name of script File with essential nvram variables
    79: ... - Location & Name of script File with dangerous nvram variables
    80: ... - Location & Name of script File with preferred nvram variables
    85: MAC=`nvram get lan_hwaddr | tr -d ":"`
  47. Switched Ports (21,983 bytes)
    8: ...f "basic" setups that are not properly handled in NVRAM by the GUI
    23: ...mands'' GUI!) and run these commands to check the nvram variables for your default vlan configuration bef...
    25: nvram show | grep vlan.*ports | sort
    26: nvram show | grep port.*vlans | sort
    27: nvram show | grep vlan.*hwname | sort
  48. Router Slowdown (14,417 bytes)
    80: ...o set this value before booting (and there was no nvram setting for that?).
    95: nvram set ip_conntrack_max=16384
    96: nvram commit
    157: ...ering, the 'prefix' var is there to save space in nvram.
    201: nvram set clkfreq=216
  49. PPTP Server Configuration (20,228 bytes)
    264: ...d to the client, you can set/commit the following nvram params:
    268: nvram set pptpd_dns1=ip-address-of-first-dns-server
    269: nvram set pptpd_dns2=ip-address-of-second-dns-server
    270: nvram set pptpd_wins1=ip-address-of-first-wins-server
    271: nvram set pptpd_wins2=ip-address-of-second-wins-server
  50. USRobotics USR5461 (11,735 bytes)
    10: USR5461 has only 2MB of NVRAM which contains 128KB compressed CFE (Boot Loader)...
    122: ...he router is flashing the new firmware image into NVRAM, and then reboots, all on its own.
  51. Broadcom CFE backup (3,803 bytes)
    34: The same can be done with the ''nvram'', ''kernel'', etc.
  52. Motorola WR850G (8,284 bytes)
    19: ...ot of other motorola-specific data got wiped from NVRAM also, so it probably won't be possible to revert ...
  53. DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
    17: ...es eingebettetes Flash-Image, welches sich in den NVRAM-Abschnitt setzt, wenn etwas fehlerhaft ist oder d...
    45: ...ellungen erwähnt (offensichtlich wird sie in das NVRAM-Image eingesetzt, dort gibt es eine Zeichenkette ...
    91: ...o?): führen Sie <b> NIEMALS </b> <code>mtd erase nvram</code> auf dem WR850G aus.<br>
    96: ...07 fast voll unterstützt. Da die MAC-Adressen im NVRAM gespeichert werden, werden sie bei einem Reset au...
    208: ... arbeitet nur, wenn alle DD-WRT-Einträge aus dem NVRAM entfernt worden sind, aber was soll's)</i><br>
  54. WEB server (4,541 bytes)
    49: ... is to set the http_lanport nvram variable in the nvram:
    51: nvram set http_lanport=81
    52: nvram commit
    71: nvram set rc_firewall=""
    72: nvram commit
  55. WR850G v1 (26,232 bytes)
    34: ...asp</code> page as well which gives access to all NVRAM settings.)</i><br>
    43: ...t makes it really hard: 4.03, with more than 1000 NVRAM entries created by DD-WRT, doesn't allow to resto...
    86: ...ware reset to write this encrypted strings to the nvram. But, as stated below we can '''never do a factor...
    90: ...ace, clear the username/password variables in the nvram, by executing the
    94: nvram set http_username=
  56. Spanning Tree Protocol (29,361 bytes)
    371: ... which link is which.. hmm. that is stored in the nvram variables
    377: root@Main:~# nvram show | grep wds[23]_ | sort
    458: root@Media:~# nvram show | grep wds[12]_ | sort
  57. Factory Defaults (25,206 bytes)
    6: =NVRAM=
    8: ''Merge needed with [[Hardware#NVRAM]].
    10: ...t stores persistent settings between reboots. The NVRAM is also retained between flashes of different fir...
    12: ...t the new firmware encounters known values in the NVRAM.
    17: ...save your settings to a file, you are dumping the NVRAM settings to a binary file. Because of this, you s...
  58. Installation (20,950 bytes)
    88: ...This is probably not needed, but if the memory or nvram is almost full, a firmware update can brick it. ...
    95: ... [[Hard_reset_or_30/30/30#Erasing_NVRAM|erase the nvram]].
    155: ...e version changes) via ''erase nvram'' '''or''' ''nvram erase''
    156: ...ee [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]] for details.
    172: nvram set dns_dnsmasq=1
  59. Netgear R9000 (8,270 bytes)
    89: ...ion -> Factory Defaults"'' page or via telnet/ssh nvram erase && reboot.
  60. Netgear WNR834Bv1 (3,922 bytes)
    11: ...unless the nvram has been erased using the CFE's "nvram erase" command then it will need flashing with th...
  61. Linksys WRT54G-TM (9,840 bytes)
    119: 2a). nvram set et0macaddr=your mac here (format = XX:XX:XX:X...
    120: Example: nvram set et0macaddr=00:10:20:30:40:A1
    126: 5a). nvram commit
    130: Note: the nvram set et0macaddr and the nvram commit can be combined in the commands box.
    133: nvram set et0macaddr=xx:xx:xx:xx:xx
  62. Asus WL-500W (8,082 bytes)
    15: ...ighly''' recommended as well as a clearing of the NVRAM. Starting from a clean slate will provide the sm...
  63. Dual-WAN for simple round-robin load equalization (7,746 bytes)
    12: nvram set vlan0ports="1 2 3 5*"
    13: nvram set vlan2ports="4 5"
    14: nvram set vlan2hwname=et0
    15: nvram commit
    29: if [ "$(nvram get wan2_ipaddr)" != "$WAN2_IPADDR" ]; then
  64. Access To Modem Configuration (8,284 bytes)
    17: ...m get wan_ifname) for `nvram get wan_ifname)` if `nvram get wan_ifname)` does not work.''
    24: ifconfig `nvram get wan_ifname`:0 10.0.0.2 netmask 255.255.255.0
    27: iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE
    32: ...5.255.255.0<br>iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE
    36: ...ish to enter it manually, you should run '''echo `nvram get wan_ifname`''' to get your WAN interface name...
  65. Wireless access point (16,324 bytes)
    137: if test `hostname` != `nvram get wan_hostname`; then
    138: nvram set wan_hostname=`hostname`;
    139: nvram set router_name=`hostname`;
    140: nvram commit;
    149: route add default gw `nvram get wan_gateway`
  66. WHR-HP-G54 (24,374 bytes)
    91: 0x003f0000-0x00400000 : "nvram"
    140: ''Note: <code>nvram show | grep gpio</code> shows '''14''' available ...
    153: <pre>nvram get boardflags</pre>
    157: <pre>nvram set boardflags=0x3758
    158: nvram commit
  67. Instalación (27,687 bytes)
    105: ...rante 30 segundos. De esta manera, se vaciará la NVRAM, la configuración que hubiera y el usuario/passw...
    129: ... '''Nota:''' El paso 2b (la limpieza manual de la NVRAM) es recomendada para asegurarse que el radio obte...
  68. Soporte (7,376 bytes)
    47: También, nunca olvides limpiar tu nvram (resetear tu router a los valores de fabrica) ant...
    71: ... WL-500G Deluxe despues de flash DD-WRT fallido o NVRAM Corrupta.
    77: ...por OLEG de http://www.wl500g.info . Renombralo a nvram.trx!
    96: ...md) de windows y escribe: tftp -i 192.168.1.1 PUT nvram.trx, and wait 5 min. Reinicia tu router y ejecuta...
  69. WAN Traffic By Month (1,740 bytes)
    13: You can look at the raw data in NVRAM.
    17: nvram show | grep traff[-_]
    22: The traffic data is kept in nvram variables that look like this:<br>
    31: nvram get traff-06-2008
    34: nvram set traff-04-2008="1:1 1:1"
  70. Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
    85: ...e inferior del router. Sigue esto con el comando 'nvram commit' y luego 'reboot'.
  71. Dynamic DNS (28,564 bytes)
    780: <pre>nvram set ddns_loglevel=[debug|info|notice|warning]</pr...
    783: <pre>nvram set ddns_loglevel=debug</pre>
    792: <pre>nvram unset ddns_loglevel && service ddns restart</pre>
  72. Lentitud del Router (4,693 bytes)
    71: nvram set clkfreq=216
    72: nvram commit
  73. Telnet/SSH y la Linea de Comandos (8,677 bytes)
    29: ...telnet o ssh) la variable sshd_authorized_keys de nvram.
    31: nvram set sshd_authorized_keys=key1 key2 key3 etc
  74. Tutorial de instalación para WRT54G v4 (8,925 bytes)
    48: ...del router por unos 30 segundos. Esto limpiara tu NVRAM, la configuración y reseteará la contraseña a ...
    131: ... mas arriba. Nota: el paso 2b (limpieza manual de NVRAM) es recomendada para asegurarte que el radio obte...
  75. Instala tu Buffalo WBR-G54, WLA-G54, ... (5,367 bytes)
    65: ... "a prueba de fallos" y de alguna forma repara la NVRAM... (a mi me funcionó, Esa Häkkinen 2006-02-02 <...
    70: ...r (usuario: root , contraseña: admin , mtd erase nvram [enter], reinicia [enter].
    72: ...M (usuario: root , contraseña: admin , mtd erase nvram [enter], reinicia [enter]. Esto devolvera los pue...
    74: '''Toma en cuenta:''' Limpar la NVRAM cambiará las direcciones MAC de 00:07:40:xx:xx:x...
    76: nvram set et0macaddr=xx:xx:xx:xx:xx:xx
  76. 什么是 "DD-WRT"? (53,158 bytes)
    705: nvram get wl0_corerev<br>
  77. Enable 16MB RAM on WRT54GS v5 (585 bytes)
    3: nvram set sdram_init=0x0A
    4: nvram set sdram_ncdl=0
    5: nvram commit
  78. Optware (46,421 bytes)
    740: nvram set sys_enable_jffs2=1
  79. Multiple DDNS Accounts (7,338 bytes)
    16: ...nt information in nvram. On router startup, these nvram values are written into files in /tmp/ddns for in...
  80. 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
    69: ... use troubleshoot-mode and it kind of repairs the NVRAM... (worked for me, Esa Häkkinen 2006-02-02 <esa....
    74: ...ter (username: root , password: admin , mtd erase nvram [enter], reboot [enter].
    76: ...ram (username: root , password: admin , mtd erase nvram [enter], reboot [enter]. This will bring back the...
    78: '''Please note:''' Clearing nvram will also change the MAC addresses from 00:07:40:...
    80: nvram set et0macaddr=xx:xx:xx:xx:xx:xx
  81. MN-700 (10,914 bytes)
    14: ...lds will brick the router, you will have to clear NVRAM through JTAG (recovery mode will NOT work).
    28: There are several ways the MN-700's NVRAM can be reset.
    33: ...m firmware to be installed on the MN-700 to reset NVRAM.
    80: === NVRAM Protection ===
    81: ...ver boots) and can only be unbricked by resetting NVRAM through a JTAG connector. I can't define ''exces...
  82. Universal Wireless Repeater (9,297 bytes)
    63: nvram set wl_ssid=""
  83. Configuraciones, (COMO HACERLO o HOWTOs) (8,212 bytes)
    203: los valores NC_ de la nvram.
    234: ...e presentacion de dd-wrt guarda los valores en la nvram con
    235: el siguinte comando: nvram show | grep NC_
  84. Firmware FAQ (39,448 bytes)
    62: ...iewtopic.php?p=1112621#1112621 expand the default nvram]
    121: ...(sometimes called factory defaults) are stored in NVRAM. For more information, see [[Factory_Defaults|Fac...
    177: == How do I clear the NVRAM? Reset to factory/firmware defaults? Cold reboot?...
    184: ...ssue is found] (to verify it isn't related to the nvram)
    188: ... the new firmware, or similarly, if almost out of nvram. Flashing to or from other third-party firmware ...
  85. Dual WAN with one as standby backup (4,340 bytes)
    19: dynamic will require some changes (hint: <code>nvram set wan2_proto=dynamic</code>)
    22: ...ed the first WAN connection (tied to vlan1) using nvram
    29: nvram set vlan0ports="1 2 3 5*"
    30: nvram set vlan2ports="4 5"
    31: nvram set vlan2hwname=et0
  86. Known incompatible devices (18,777 bytes)
    1087: ... BCM5354 SOC<br>2MB Flash/8MB RAM<br>incompatible nvram size
    1094: ...BCM5356 SOC<br>4MB Flash/16MB RAM<br>incompatible nvram size
    1108: ...BCM5356 SOC<br>4MB Flash/16MB RAM<br>incompatible nvram size
  87. Version 5 And 6 Router Information (5,963 bytes)
    43: Some report that you can clear the nvram by plugging in the router while shorting pin 16. ...
  88. Reset And Reboot (4,732 bytes)
    11: ...ehaviour here is for it to not actually clear the nvram, although many people think of it and phrase it t...
    16: ...results. Some platforms will completely empty the nvram and depend on another stage of the bootloader or ...
    21: ...o do it three times till it fully cleared out the nvram on mine" I think this forum poster actually meant...
    28: It should be noted that this will not clear the nvram nor reset the router back to factory/firmware def...
    30: === Clearing The nvram ===
  89. D-Link DIR-615 rev C (10,866 bytes)
    59: ...tes. (I don't know if it has to build anything in NVRAM, but better safe than sorry.)
  90. Miscellaneous/zh cn (971 bytes)
    21: * [[Hardware#NVRAM|NVRAM]]
  91. Installation/ja (27,080 bytes)
    165: Restore factory defaults using erase nvram command or reset button
  92. Gateworks Avila/Cambria Installation (14,682 bytes)
    188: ...create -b 0x00800000 -f 0x050FC0000 -l 0x00020000 nvram
  93. 启动脚本 (7,822 bytes)
    25: ...rtup'' variable in flash memory (also known as an NVRAM variable). Since flash memory doesn't get erased ...
    27: =NVRAM Method=
    39: nvram set rc_startup="
    46: When you give the command ''nvram commit'' the ''rc_startup'' variable is saved in ...
    48: nvram commit
  94. AutoAP (11,662 bytes)
    25: nvram set wl_ssid=""
    65: ...vior of AutoAP script by setting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to pre...
    68: nvram set autoap_prefssid="my_net*key*abcdef1234"
    69: nvram commit
    74: =NVRAM Variables=
  95. Linksys WRTSL54GS (13,481 bytes)
    119: 0x007e0000-0x00800000 : "nvram"
    225: nvram set jffs_mounted=1
    226: nvram set enable_jffs2=1
    227: nvram set sys_enable_jffs2=1
    228: nvram set clean_jffs2=1
  96. Micro-plus (26,693 bytes)
    137: ...xr-x 1 root root 3583 Jan 1 2009 nvram
    519: mtd3: 00010000 00010000 "nvram"
  97. LaFonera Software Flashing (30,993 bytes)
    172: ...oot header does not care about network setting in NVRAM, therotically maybe they are right but my device ...
    306: fis create -f 0xA83D0000 -l 0x00010000 -n nvram
    339: ...edBoot> fis create -f 0xA83D0000 -l 0x00010000 -n nvram
    350: =Resetting NVRAM=
    351: ...tion is corrupted/incorrect, try resetting of the NVRAM. Power up the unit, and wait about 2 minutes, the...
  98. Routeurs en mode réseau WDS (6,113 bytes)
    41: ...les fichiers de la nvram (i.e. nvram_host.bin, et nvram_client.bin). Les configurations pourront être re...
  99. LaFonera Software Chilispot (12,365 bytes)
    105: fis create -f 0xA83D0000 -l 0x00010000 -n nvram
  100. LaFonera Software Universal-Repeater (25,850 bytes)
    683: nvram set wl_ssid=""
  101. Detached Networks using VLAN (3,305 bytes)
    21: ...rt with port 1 then the first line would read: '''nvram set vlan0ports="1 2 5*"''', and just delete the s...
    24: nvram set vlan0ports="1 5*"
    25: nvram set vlan2ports="2 5*"
    26: nvram set vlan3ports="3 5*"
    27: nvram set vlan4ports="4 5*"
  102. VLAN Detached Networks (Separate Networks With Internet Access) (3,314 bytes)
    21: ...with port 1 then the first line would read: '''“nvram set vlan0ports=”1 2 5*”''', and just delete t...
    26: nvram set vlan0ports="1 5*"<br>
    27: nvram set vlan2ports="2 5*"<br>
    28: nvram set vlan3ports="3 5*"<br>
    29: nvram set vlan4ports="4 5*"<br>
  103. VLAN Detached Networks (Separate Networks With Internet) (10,214 bytes)
    9: ...or SSH into the router and take care of necessary NVRAM detail. See [[Switched Ports]].
    108: ...with port 1 then the first line would read: '''“nvram set vlan0ports=”1 2 5*”''', and just delete t...
    115: nvram set vlan0ports="1 5*"
    116: nvram set vlan2ports="2 5*"
    117: nvram set vlan3ports="3 5*"
  104. OpenVPN - Site-to-Site Bridged VPN Between Two Routers (15,515 bytes)
    237: ...to make sure your router won't brick due to large nvram text, you can store everything on the /jffs parti...
  105. FON Hotspot (52,719 bytes)
    405: echo -en "\nradiusnasid `nvram get wl0_hwaddr|sed -e s/:/-/g`\n" >>/jffs/chilli....
    583: You can work around that in nvram; these preferences are saved in the variable fon_...
    585: nvram set fon_userlist="keith=somepass michael=anotherp...
    587: before the nvram commit statement; this should set up your FON loc...
    630: echo -en "\nradiusnasid `nvram get wl0_hwaddr|sed -e s/:/-/g`\n" >>/tmp/chilli.c...
  106. Default internal device network (6,480 bytes)
    12: ...varies according to model.''' Do the command: <tt>nvram show | grep vlan.*ports</tt> to find out which on...
    17: ...els continue to use port 5 instead of 8. Do a <tt>nvram show | grep vlan.*ports</tt> to find out which on...
  107. LaFonera Hardware Power from USB (8,045 bytes)
    104: ...ially brick your router if you tried to write out nvram settings while underpowered -- if, for example, t...
  108. WLAN separate from LAN, with independent dhcp, etc (8,524 bytes)
    105: nvram set dnsmasq_enable=0
    106: nvram commit
    184: ...les -I FORWARD -i eth1 -d `nvram get wan_ipaddr`/`nvram get wan_netmask` -m state --state NEW -j DROP
  109. Linksys WRT300N v1, v1.1 (6,576 bytes)
    95: ...outer and reconfigure from scratch, do not use an nvram backup
    109: **while sleep 1; do if [ `nvram get wl0_security_mode` = "disabled" ]; then gpio ...
  110. Linksys WRT54G2 v1.0 (18,520 bytes)
    31: ..., wait 3 min for the router to finish writing new nvram defaults, etc. It should reboot on its own at lea...
  111. UMA (3,425 bytes)
    57: ...Log on to the router via telnet/ssh type 'wl -i $(nvram get wl0_ifname) wme' (the command should return 1...
  112. 安装 (16,952 bytes)
    70: ...厂默认设置" 功能并不总是清理整个 nvram 区段。
    76: erase nvram
    122: ...】 。这是由于 SP2 使用了加密方式在 NVRAM 中存储密码。这将导致您在复位路由...
  113. LED Scripts (37,693 bytes)
    41: ...''': "gpio disable 6" will completely erase your NVRAM (i.e. do a complete reset on your router)
    231: WIFI=`nvram get ath0_net_mode`
    236: nvram set ath0_net_mode=mixed
    244: nvram set ath0_net_mode=disabled
    288: WIFI=`nvram get ath0_net_mode`
  114. Прошивка WL-500W (10,168 bytes)
    64: ...азать путь до файла wl500g-clear-nvram.trx/
    70: [[Image:Clear-nvram.jpg]]
    156: ...му что CPU все еще обновляет nvram, поэтому можно следить за е...
  115. Прошивка WL-500W с подробными скрин-шотами (10,274 bytes)
    72: ...азать путь до файла wl500g-clear-nvram.trx/
    78: [[Image:Clear-nvram.jpg]]
    166: ...му что CPU все еще обновляет nvram, поэтому можно следить за е...
  116. Repeater Bridge (20,647 bytes)
    40: ...between steps, as Save will commit the changes to NVRAM withough activating them (which Apply does), to p...
  117. Installation/fr (33,890 bytes)
    171: ... réglages usine en utilisant la commande'' erase nvram'' ou le bouton de réinitialisation.
  118. Optware, the Right Way (36,809 bytes)
    366: ...t's thing, and enjoy not having to manually reset nvram settings!
    374: Now your router will automatically backup your nvram setting every night. This more convenient than d...
    544: ... a blacklist of malicious Ad Host DNS names. The nvram variables that are changed are ''Use Local DNS'' ...
  119. LaFonera Software Heartbeat-dev (11,355 bytes)
    96: WLMAC="$(nvram get ath0_hwaddr )" #the WLAN mac-adress
    97: MAC="$(nvram get et0macaddr)" #the WAN mac-adress
    259: WLMAC="$(/usr/sbin/nvram get ath0_hwaddr)"
    260: ETMAC="$(/usr/sbin/nvram get et0macaddr)"
  120. WHR-HP-AG108 (13,246 bytes)
    164: ...e3c0000 -b 0x80041000 -l 0x00010000 -e 0x00000000 nvram
    166: * This writes an empty nvram to flash. Wait a while.<br>
    178: nvram 0xBE3C0000 0xBE3C0000 0x00010000 0...
    180: ...lash root.fs, lzma_vmlinus, and reflash the empty nvram. Don’t mistype this time.<br>
  121. Buffalo (19,760 bytes)
    264: ...If you experience problems, you may need to erase NVRAM by starting a telnet session and entering one (or...
    266: <pre>mtd erase nvram</pre>
    269: wget http://openwrt.inf.fh-brs.de/~nbd/nvram-clean.sh
    270: chmod a+x /tmp/nvram-clean.sh
    271: /tmp/nvram-clean.sh
  122. JTAG (27,197 bytes)
    38: ...router's operating system), the [[wikipedia:NVRAM|NVRAM]], (where information particular to your router a...
    44: ... will rebuild itself. You don't need to jtag the nvram.
    52: 2. Erasing the NVRAM or kernel.
    124: ... bricked routers, ALL you have to do is erase the nvram and the kernel. You do that with these commands:...
    126: tjtag -erase:nvram
  123. Linksys E1500 (7,663 bytes)
    100: *#The nvram "overclocking" parameter must also be set to the ...
    101: nvram set clkfreq=''{cpu,ddr,axi}''
    102: nvram set overclocking=''{cpu}''
    103: nvram commit && reboot
  124. Broadcom detection (3,378 bytes)
    9: ...ork for every device/hardware, except the cfe and nvram grabbing stuff.
    42: * cfe.bin & nvram.bin via [[JTAG-Adapter]] ([[CFE_backup#by_JTAG|CF...
    51: ...the nvram if you do a "save settings" and name it nvram.bin<br>
    52: Also don't forget to get a nvrambak.bin for us.
  125. Ad blocking (10,674 bytes)
    218: ...all script stored in NVRAM. If you overflow your NVRAM, expect random behavior.
  126. Linksys WRT1900AC (7,260 bytes)
    55: '''Backup the NVRAM beforehand in case something goes wrong, to resto...
  127. OpenDNS (7,637 bytes)
    72: ...REROUTING -i br0 -p udp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
    73: ...REROUTING -i br0 -p tcp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
    85: ...192.168.1.128/25 -p udp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
    86: ...192.168.1.128/25 -p tcp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
  128. Dual WAN with failover (6,281 bytes)
    16: nvram set vlan0ports="1 2 3 5*"
    17: nvram set vlan2ports="0 5"
    18: nvram set vlan2hwname=et0
    19: nvram commit
    36: if [ "$(nvram get wan2_ipaddr)" != "$WAN2_IPADDR" ]; then
  129. Setuserpasswd command (986 bytes)
    10: *This command automatically commits changes into nvram.
    13: *The username and password are stored securely in nvram variables, hashed with salt.
  130. Watchguard Firebox II (9,880 bytes)
    117: nvram set wan_hwaddr=00:11:22:33:44:55
  131. Reverse Proxy using Entware (5,257 bytes)
    73: #:<pre>nvram set http_lanport=81 (click enter)</pre>
    74: #:<pre>nvram commit (click enter)</pre>
  132. Netgear R6400v1 (2,598 bytes)
    52: To restore default nvram settings either:
    61: ...ee [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]], as this is build-dependent.
    67: ...ter this is done. Do NOT restore an nvram backup (NVRAMBAK) from previous builds in these cases, as it wi...
  133. Asus RT-AC56U (3,895 bytes)
    59: nvram set clkfreq=1200,800 (click enter)
    60: nvram commit && reboot (click enter) - router may freez...
  134. The Easiest Tunnel Ever (8,961 bytes)
    49: ...ables -t nat -I POSTROUTING -o br0 -j SNAT --to $(nvram get lan_ipaddr)</pre>
    96: ...lows you to specify custom additional interfaces (nvram set dnsmasq_addif=oet1). But, the easiest way is ...
  135. Dmesg command (4,876 bytes)
    62: 0x003f0000-0x00400000 : "nvram"
  136. Linksys WRT600N (4,396 bytes)
    24: 0x007f0000-0x00800000 : "nvram"
    30: 0x007f0000-0x00800000 : "nvram"
  137. Hard reset or 30/30/30 (5,274 bytes)
    19: ...OT''' attempt to hard reset/30-30-30 or erase the nvram on a Linksys EA series router as it may erase the...
    39: The following procedure will clear out the NVRAM and set dd-wrt back to default values:
    49: ...e the command "erase nvram". This will reset the nvram partition to defaults for this Make of router.</f...
    60: ==Erasing NVRAM==
    65: nvram erase && reboot
  138. Asus WL-520GU (18,825 bytes)
    71: There are several ways the WL-520GU's NVRAM can be reset.
    75: # Using telnet enter '''erase nvram''' command
    76: ...r it. The File pack contains both '''wl500g-clear-nvram.trx''' and the '''wl500g-recover.trx''' utilities...
    82: #Upload '''wl500g-clear-nvram.trx''' and wait for the transfer to complete. Un...
  139. Linksys WAP54G (10,094 bytes)
    8: ...rk on this device, so it is not possible to clear NVRAM using the reset button. This can be problematic i...
    17: nvram set et1macaddr=<''your MAC address minus 1 here''...
    18: nvram commit
    30: nvram set et1macaddr=00:11:22:33:44:54
    31: nvram set boardnum=2
  140. V24: WLAN separate from LAN, with independent DHCP (6,261 bytes)
    25: ...I PREROUTING -i eth1 -d $(nvram get lan_ipaddr)/$(nvram get lan_netmask) -j DROP
    26: ...I PREROUTING -i br0 -d $(nvram get eth1_ipaddr)/$(nvram get eth1_netmask) -j DROP
    47: ...-I FORWARD 1 -i eth1 -d $(nvram get lan_ipaddr)/$(nvram get lan_netmask) -j DROP
    48: ...-I FORWARD 2 -i br0 -d $(nvram get eth1_ipaddr)/$(nvram get eth1_netmask) -j DROP
    55: ...will have to convert them from the text stored in nvram to the integer expected by the command line.
  141. Linksys WRT54GL (7,215 bytes)
    44: 0x003f0000-0x00400000 : "nvram"
  142. Preventing Brute Force Attacks (8,921 bytes)
    96: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 21 -j DNAT --to 192.168.1...
  143. FirewallExample (2,098 bytes)
    10: LAN_IP=$(nvram get lan_ipaddr)
    11: WAN_IP=$(nvram get wan_ipaddr)
  144. LaFonera Software Easy Flashing (8,139 bytes)
    60: * "Create Nvram Partition (for DD-WRT)".
    115: ... will also need to check the box for creating the nvram partition for DD-WRT. Don't forget to choose your...
  145. USB on ASUS WL500GPV2 (9,930 bytes)
    10: ...mend a fresh firmware flash and a clearing of the NVRAM, starting with a clean slate will provide the sma...
  146. Netgear WAG 102 (7,486 bytes)
    279: ...FFA0000 -b 0x80041000 -l 0x00010000 -e 0x00000000 nvram
  147. Buffalo WHR-G54S and WHR-HP-G54 SD/MMC mod (23,750 bytes)
    141: ...ressed", which will cause the router to reset the NVRAM to factory default values. It should be clear tha...
  148. Accton Software Flashing (14,547 bytes)
    171: =Resetting NVRAM=
    172: ...tion is corrupted/incorrect, try resetting of the NVRAM. Power up the unit, and wait about 2 minutes, the...
    178: '''2.''' Enter the following command to erase the NVRAM partition.
    189: You're all done. DD-WRT will rebuild the NVRAM and it will be fresh as spring!
  149. WHR-G300N (9,476 bytes)
    40: ...est of these steps are to merely ensure that your NVRAM is cleared of all the old data.
  150. Buffalo N450 (831 bytes)
    35: ...ash to User-Friendly Firmware you need to set the nvram variable bver_override to 1
  151. Dual Access PPTP (10,667 bytes)
    152: if [ "$(nvram get wan_gateway)" != "XXX.XXX.XXX.XXX" ]; then
    154: nvram set $param
  152. Drucker Sharing X86 Based (3,079 bytes)
    32: ...xr-x 2 root root 1024 Jan 1 1970 nvram
    50: ./nvram:
    52: ...-r-- 1 root root 24704 Jan 1 1970 nvram.db
    57: '''5. Es muss nun die nvram Variable angepasst werden:'''
    60: nvram set rc_startup="/usr/local/rc_startup/rc_init.sh"
  153. Connection Limit Notifier (3,207 bytes)
    65: =NVRAM variables used=
  154. Slim samba2 (13,876 bytes)
    160: ... automatically copy the IP settings of the dd-wrt NVRAM settings to the smb.conf file.
  155. HDsamba2 (25,237 bytes)
    112: ...lete the jffs relocation during startup by typing nvram set rc_startup="" in the console.
  156. EoIP Routing (4,684 bytes)
    9: ...larly the section on configuring EoIP settings in NVRAM.
  157. 教程 (8,580 bytes)
    94: * [[Jffs/zh_cn|JFFS - 使用 nvram 来启用 Jffs]]
  158. 其它 (969 bytes)
    20: * [[Hardware#NVRAM|NVRAM]]
  159. VPN (the easy way) v24+ (38,319 bytes)
    19: ==Enough NVRAM storage space?==
    20: ...ntly stored in the NVRAM area.''' Overfilling the NVRAM area is likely to brick your router'''.
    22: ...ZE of 1024 you need about 5200 bytes available in NVRAM on the server-side before you push SAVE in the we...
    23: ...ZE of 2048 you need about 6000 bytes available in NVRAM on the server-side.
    25: To test how much NVRAM space is left (and used) telnet or ssh into your ...
  160. Overclocking (1,155 bytes)
    11: <pre>nvram get clkfreq</pre>
    13: <pre>nvram get clkfreq
    19: <pre> nvram set overclocking=600</pre>
    25: nvram get clkfreq
    26: nvram set clkfreq=600,300,150
  161. Asus TFTP Flash (17,505 bytes)
    52: ...ile Pack] which contains both the '''wl500g-clear-nvram.trx''' and '''wl500g-recover.trx'''
    59: ...t router in recover-mode and load '''wl500g-clear-nvram.trx'''
    78: ...router in recover-mode and upload '''wl500g-clear-nvram.trx'''
    84: ...'Step 11:''' Use tftp to transfer '''wl500g-clear-nvram.trx''' to the router. The commands are as follows...
    86: tftp -i 192.168.1.1 put wl500g-clear-nvram.trx
  162. Corerev List (3,597 bytes)
    9: nvram show|grep corerev
    13: nvram get wl0_corerev
    14: nvram get wl1_corerev
  163. Linksys WRT54G v4.0 (10,550 bytes)
    85: ...f the router for 30 seconds. This will clear your NVRAM, the configuration and reset the password to ''ad...
    148: ...ve. Note: step 2b (the manual way of clearing the NVRAM) is recommended to make sure the radio gets the c...
  164. D-Link DIR-320 64 Mb RAM Upgrade/ru (6,833 bytes)
    52: == Изменение NVRAM ==
    55: ...мо изменить SDRAM_INIT параметр NVRAM, для этого выполните в конс...
    57: nvram set sdram_init=0x0013
    58: nvram commit
  165. Insufficient ram (4,134 bytes)
    37: ...ervice makes pretty traffic graphs, but will load nvram.
  166. D-Link DIR-320 64 Mb RAM Upgrade (1,761 bytes)
    24: ...9-r12874/ here] and have to update the SDRAM_INIT NVRAM parameter. I you don't perform this step the BCM5...
    28: nvram set sdram_init=0x0013
    29: nvram commit
    32: If you erase the NVRAM you need to execute the previous commands again.
  167. D-Link DIR-330 (24,059 bytes)
    54: Direct link to the CFE and NVRAM that you will need for JTAG support:
    93: # At the '#' prompt, type 'erase nvram' hit <enter><br>
    96: ...his is the process of initializing the router and NVRAM.<br>
    110: # Technically, you are done. But, erase the NVRAM again just to ensure total success and normal ope...
    114: # At the '#' prompt, type 'erase nvram' hit <enter><br>
  168. Asus WL500-- old descriptions (33,699 bytes)
    9: ...46 This file pack] which contains '''wl500g-clear-nvram.trx''' (filesize: 1,585,152 bytes) and '''wl500g-...
    22: ...e Restoration Tool</b> and upload <b>wl500g-clear-nvram.trx</b>. Wait until upload is complete and it reb...
    93: 5. Choose the '''wl500g-clear-nvram.trx''' file and upload it to the router. Wait 2-3...
    118: ...0g.dyndns.org/wl500g-clear-nvram.trx wl500g-clear-nvram.trx]<br>
    153: * Tftp-ed clear-nvram in 4s, like explained a bit later, waited 2min, s...
  169. Linksys WRT54G v2.0 (9,258 bytes)
    23: ... > 5 by typing in the ''Admin->Commands'' window "nvram get wl0_corerev" which returned "7". [[What_is_D...
  170. Linksys WRT54G v1.0 & 1.1 (6,312 bytes)
    23: ... router to determine corerev (see Peacock step 4, nvram get wl0_corerev) to confirm that corerev=4. There...
  171. Micro Redboot (3,960 bytes)
    40: ...sec the device will be reseted to defaults (reset nvram) as known. <br>
  172. Linksys WRT54G2 v1.3 & WRT54GS2 v1.0 (5,285 bytes)
    29: ..., wait 5 min for the router to finish writing new nvram defaults, etc... It should reboot on its own at l...
    45: ..., wait 5 min for the router to finish writing new nvram deafults, etc... It should reboot on its own at l...
  173. Belkin F5D8235-4 v2000 (9,430 bytes)
    98: 0x007e0000-0x007f0000 : "Nvram"
  174. Asus RT-N16 (18,355 bytes)
    17: !NVRAM
    63: ... Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]])
    65: ... Default settings ([[Hard_reset_or_30/30/30|Clear NVRAM]]) or via DD-WRT webGUI
    82: ...set]]. The following procedure will clear out the NVRAM and set dd-wrt back to default values:
    86: #:''Note on Asus hardware reset'' for NVRAM clear: do not use the Reset button. See [http://w...
  175. VLAN Detached Networks - Linksys E2500 (3,616 bytes)
    15: ...o causes unpredictable results. Also, there is an nvram variable wan_default set to vlan2. Modifying this...
    29: nvram set vlan0ports="2 3 5"<br>
    30: nvram set vlan1ports="0 1 5*"<br>
    31: nvram set vlan2ports="4 5"<br>
    32: nvram commit<br>
  176. Linksys WRT54G v7.2 (2,482 bytes)
    23: ..., wait 3 min for the router to finish writing new nvram deafults, etc... It should
  177. Multiple WLANs (14,425 bytes)
    26: nvram get wl0_corerev
    137: ...nat -I POSTROUTING -o `get_wanface` -j SNAT --to `nvram get wan_ipaddr`
    158: ...bles -I FORWARD -i br1 -d `nvram get wan_ipaddr`/`nvram get wan_netmask` -m state --state NEW -j DROP
    162: ...bles -I FORWARD -i br1 -d `nvram get lan_ipaddr`/`nvram get lan_netmask` -m state --state NEW -j DROP
    166: ...tables -t nat -I POSTROUTING -o br0 -j SNAT --to `nvram get lan_ipaddr`
  178. Remote Scripts (12,481 bytes)
    233: while \[\[ \\( \$(nvram get wanup) -eq 0 \\
    349: send "nvram set rc_startup=\"[aggregated_launch_string [linde...
    352: -re {root@.*:} {exp_send "nvram commit\n"}
    364: send "nvram set rc_startup=\"\
    370: -re {root@.*:} {exp_send "nvram commit\n"}
  179. Linksys WRT320N v1.0 (5,706 bytes)
    35: *K3X builds have software expanded nvram, so is a workaround versus [http://www.dd-wrt.com...
    42: ...[Switched Ports]] for manual configuration of the nvram variables.
    57: erase nvram && reboot
    73: nvram set clkfreq=300,150,75
    74: nvram commit
  180. Asus RT-N12 (12,946 bytes)
    47: ===Clear NVRAM===
    48: To clear NVRAM on all models, hold the red WPS button for 20 sec...
    88: #Click on the link below Reboot to reset the NVRAM.
  181. Upgrading WL-500g Premium WL-500W and WL-700gE RAM to 128MB (4,737 bytes)
    21: nvram set sdram_init=0x000b
    22: nvram set sdram_config=0x0032
    23: nvram commit
    39: nvram set sdram_init=0x0011
    40: nvram set sdram_config=0x0062
  182. Belkin F5D7230-4 v2xxx and Lower (10,950 bytes)
    129: <pre>nvram set lan_ifnames="eth0 vlan0"
    130: nvram set port0vlans=0
    131: nvram set lan_ifname=eth0
    132: nvram set wan_ifname=vlan1
    133: nvram set wan_ifnames=vlan1
  183. Asus WL500W (2,622 bytes)
    29: ...changes. This is because the CPU is still writing NVRAM variables. Watch the CPU usage, once it falls Bel...
  184. Belkin F5D7230-4 v2000,v2000de + Belkin F5D7231-4 v1102,v1003ee, and v1103uk (2,181 bytes)
    21: ::nvram set Belkin_ver=2000<br>
    22: ::nvram commit<br>
    34: nvram set wan_to_lan=yes<br>
    35: nvram commit<br>
    40: nvram unset wan_to_lan<br>
  185. MyPage (36,169 bytes)
    26: Mypage depends on the NVRAM variable '''mypage_scripts'''. Usually this varia...
    37: ...o setup the variable using nvram. (See [[Hardware#NVRAM|Hardware]])
    42: ...on the default refresh interval stored inside the NVRAM partition (default:3 sec.).
    53: ...This file can be used as import file to reset the NVRAM partition.
    64: '''mypage7.sh''' is named '''NVRAM'''.<br>
  186. Linksys WRT610N v2.0 (9,448 bytes)
    23: ...ww.dd-wrt.com/wiki/index.php/Linksys_WRT610N_v2.0#NVRAM_Erase_breaks_Management_Mode this].
    85: == NVRAM Erase breaks Management Mode ==
    86: ...g the technique above. It appears that after the nvram is erased (via a 30-30-30 reset for example) the ...
    121: ... I found was that DD-WRT actually likes the extra NVRAM better. YMMV. Cheers!
  187. Netgear WNDR3300 (18,349 bytes)
    29: 0x003f0000-0x00400000 : "nvram"
  188. Netgear WNR834Bv2 (9,270 bytes)
    64: ...vent that you accidentally erase this part of the NVRAM, you can only recover your router by flashing it ...
    79: * Functional NVRAM backup is [http://www.dd-wrt.com/phpBB2/download....
  189. ASUS RT-G32 (9,327 bytes)
    119: ...es -t mangle -A PREROUTING -i ! `get_wanface` -d `nvram get wan_ipaddr` -j MARK --set-mark 0xd001<br />ip...
  190. Overclocking BCM 47xx CPU's (7,179 bytes)
    102: nvram set clkfreq=(value) example: 480,240,120
    104: nvram commit
  191. Netgear R6400v2 (2,478 bytes)
    57: ...veral methods to reset to default settings (clear NVRAM).<br>
    70: ...e && reboot` for [[Hard_reset_or_30/30/30#Erasing_NVRAM build 35770 and later]].<br>
    72: ... for certain upgrades as well]. Do NOT restore an nvram backup as it will undo the reset.
  192. Netgear R6700v3 (5,388 bytes)
    99: If you need to reset (clear historical NVRAM settings) select factory reset option from drop d...
    105: ...nd pass the following command (without quotes): "nvram erase && reboot" <br>
    107: ... after upgrading avoided issues (do NOT restore a NVRAMBAK from previous build it basically will undo you...
  193. Netgear AC1450 (2,333 bytes)
    54: If you need to reset (clear historical NVRAM settings) select factory reset option from drop d...
    60: ...nd pass the following command (without quotes): "nvram erase && reboot" <br>
    62: ... after upgrading avoided issues (do NOT restore a NVRAMBAK from previous build it basically will undo you...
  194. Часто задаваемые вопросы (69,439 bytes)
    61: ...iewtopic.php?p=1112621#1112621 расширяют NVRAM] по умолчанию.
    122: ...настройками) сохраняются в NVRAM. Для получения дополнитель...
    183: == Как очистить NVRAM? Сброс к заводским настрой...
    191: ...иться, что она не связана с NVRAM):
    195: ...ом, если почти отсутствует NVRAM. Перепрошивка на или с друг...
  195. Что такое DD-WRT? (41,715 bytes)
    95: nvram get wl0_corerev<br>
  196. Asus WL-500g Premium V2 (13,166 bytes)
    195: erase nvram
  197. Linksys E2000 (7,786 bytes)
    40: nvram #03 007F1000 -> 007FFFFF (61440)
    44: nvram #02 007F1000 -> 007FFFFF (61440)
    113: nvram set clkfreq=300,150,75
    114: nvram commit && reboot
    127: **Erase nvram from CLI highly recommended. Working: 2.4GHz WiFi...
  198. Linksys WRT310N v2.0 (6,551 bytes)
    23: ...h two options, to upload a new firmware and Reset NVRAM.
    24: #* Click 'Reset NVRAM' Wait a few seconds and return the router to Mana...
  199. Installation/it (26,496 bytes)
    176: Restore factory defaults using erase nvram command or reset button
  200. Public Sub-Net Over Dynamic WAN (5,015 bytes)
    60: WANIP=`nvram get wan_ipaddr`
  201. Instalación en el enrutador Buffalo WHR-G54S y WHR-HP-G54 (6,604 bytes)
    54: <pre>nvram show | grep boardflags
    63: nvram set boardflags=0x2758
    64: nvram commit
    73: ...experimentas problemas, puede que debas borrar la NVRAM, ingresando via una sesion Telnet y ejecutando un...
    75: <pre>mtd erase nvram</pre>
  202. Instalación en el enrutador WRT54G-TM (12,061 bytes)
    152: nvram set et0macaddr=tu MAC (formato = XX:XX:XX:XX:XX:X...
    155: nvram set et0macaddr=00:10:20:30:40:A1
    160: nvram commit
    164: ...den simplificar, '''nvram set et0macaddr''' y '''nvram commit''' se combinan en la caja de comandos.
    167: nvram set et0macaddr=xx:xx:xx:xx:xx
  203. Firmware FAQ/zh cn (35,646 bytes)
    100: ...(sometimes called factory defaults) are stored in NVRAM. For more information, see [[Factory Defaults]].
    106: ...-xxx after unsuccesfull DD-WRT flash or Corrupted NVRAM.
    136: ...hell of windows and type: tftp -i 192.168.1.1 PUT nvram.trx, and wait 5 min. Reboot your router and do st...
    183: == How do I clear the NVRAM? Reset to factory/firmware defaults? Cold reboot?...
    204: ...s page. This will store the lease database in the NVRAM.
  204. “三八”文件系统 (9,386 bytes)
    33: nvram set samba_user="username"
    34: nvram set samba_password="password"
    36: ...re -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  205. Samba文件系统 (9,371 bytes)
    34: nvram set samba_user="username"
    35: nvram set samba_password="password"
    37: ...re -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  206. Iptables command/zh cn (24,472 bytes)
    175: iptables -A INPUT -p tcp -m tcp -d `nvram get lan_ipaddr` --dport 22 -j logaccept
    176: ...an_ipaddr` --dport 2222 -j DNAT --to-destination `nvram get lan_ipaddr`:22
    220: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 8000 -j DNAT --to 192.168...
    225: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
    229: ... -t nat -I PREROUTING -p tcp -s 123.45.67.89 -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
  207. Linksys WRT54G v4.0/zh-cn (10,821 bytes)
    81: ...f the router for 30 seconds. This will clear your NVRAM, the configuration and reset the password to ''ad...
    144: ...ve. Note: step 2b (the manual way of clearing the NVRAM) is recommended to make sure the radio gets the c...
  208. 固件FAQ/zh cn (23,519 bytes)
    100: ...(sometimes called factory defaults) are stored in NVRAM. For more information, see [[Factory Defaults]].
    106: ...-xxx after unsuccesfull DD-WRT flash or Corrupted NVRAM.
    136: ...hell of windows and type: tftp -i 192.168.1.1 PUT nvram.trx, and wait 5 min. Reboot your router and do st...
    183: == How do I clear the NVRAM? Reset to factory/firmware defaults? Cold reboot?...
    204: ...s page. This will store the lease database in the NVRAM.
  209. Reset And Reboot/zh cn (4,877 bytes)
    11: ...ehaviour here is for it to not actually clear the nvram, although many people think of it and phrase it t...
    16: ...results. Some platforms will completely empty the nvram and depend on another stage of the bootloader or ...
    21: ...o do it three times till it fully cleared out the nvram on mine" I think this forum poster actually meant...
    32: It should be noted that this will not clear the nvram or set the router back to factory/firmware defaul...
    34: === 请除静态式记忆体(nvram)并恢复为固件或韧体(Firmware)的内定或...
  210. Hard reset or 30/30/30/zh cn (4,123 bytes)
    18: The following procedure will clear out the NVRAM and set dd-wrt back to default values:
    19: ...易失性存储器)[http://zh.wikipedia.org/zh-cn/NVRAM]:
    35: ====擦除NVRAM:====
    40: ... color=red>[CAUTION] - On some devices, resetting NVRAM in this fashion may cause more problems than it s...
    49: erase nvram
  211. Telnet/SSH and the command line/zh cn (17,355 bytes)
    23: ...,你可以手工设置(通过telnet或ssh)NVRAM的sshd_authorized_keys 变量。
    26: nvram set sshd_authorized_keys=key1 key2 key3 etc
    65: root@wrt54g:~# nvram set sshd_authorized_keys='
    71: root@wrt54g:~# nvram commit
    237: ...''nvram show'' which list some 800-1200 lines. ''nvram show | more'' will list the results 1 page at a t...
  212. HTTP Redirect/zh cn (3,606 bytes)
    30: nvram set http_redirect_enable=0
    31: nvram commit
  213. Asus RT-N10U (9,643 bytes)
    42: ...gs ([[Asus_RT-N10U#Clear_NVRAM_on_this_unit|Clear NVRAM]])
    44: ...gs ([[Asus_RT-N10U#Clear_NVRAM_on_this_unit|Clear NVRAM]])
    46: ...gs ([[Asus_RT-N10U#Clear_NVRAM_on_this_unit|Clear NVRAM]])
    50: ...gs ([[Asus_RT-N10U#Clear_NVRAM_on_this_unit|Clear NVRAM]]) via web menu: Advanced settings -> Administrat...
    57: ...gs ([[Asus_RT-N10U#Clear_NVRAM_on_this_unit|Clear NVRAM]]) via DD-WRT web menu: Administration -> Factory...
  214. Asus RT-N66U (15,667 bytes)
    48: '''NOTE:''' The NVRAM issue has been resolved in newer CFE versions (an...
    54: ... router]], <font color="red">if CFE v1.0.1.3 (64K nvram) or 'NEWER' - DO NOT USE K2.6 builds</font>'''
    55: * If using Older CFE (32K nvram) you can use K2.6 builds
    60: #[[Asus_RT-N66U#WPS_button_to_Clear_NVRAM|Reset NVRAM via WPS button]] , or select WebGUI option: Facto...
    63: #[[Asus_RT-N66U#WPS_button_to_Clear_NVRAM|Reset NVRAM via WPS button]], or select WebGUI option: Factor...
  215. Setpasswd command (728 bytes)
    5: ...can check by comparing the hashed password in the NVRAM setting to the /etc/passwd file:
    7: root@DD-WRT:~# nvram get http_passwd
  216. Прочее (603 bytes)
    14: [[Hardware/ru]] - Перевод "NVRAM" - работа с настройками и за...
  217. Device-Specific Information (539 bytes)
    13: * [[Hardware#NVRAM|NVRAM]]
  218. OpenVPN/zh cn (61,835 bytes)
    27: ... you can telnet or ssh into your router and type "nvram show | grep size".
    73: ...CATE-----</tt> is necessary; as it is stored in [[nvram]], everything else from that file should be remov...
    145: ...certs/keys into nvram. I then ran the following 3 nvram commands in the command window at the same time:
    147: nvram set openvpn_tls='
    152: nvram set openvpn_cfg='
  219. NoCatSplash/zh cn (13,817 bytes)
    117: nvram entries:<br/>
  220. Punto acceso inalámbrico (11,226 bytes)
    129: if test `hostname` != `nvram get wan_hostname`; then
    130: nvram set wan_hostname=`hostname`;
    131: nvram set router_name=`hostname`;
    132: nvram commit;
  221. ProFTPd Server (4,082 bytes)
    34: wanf=`nvram get wan_iface`
  222. Asus WL-500g Premium En (13,154 bytes)
    36: ...r lower will be written a little something in the NVRAM variable rc_startup. This leads at the start all ...
    40: nvram set rc_startup="
    45: nvram commit
    176: ==Temporary HTML page created with NVRAM contents==
    180: nvram show | sed 's/$/<\br>/' > /tmp/www/nvram.htm
  223. Asus WL-500g Premium de (14,302 bytes)
    34: ... oder niedriger muss noch eine Kleinigkeit in die NVRAM Variable rc_startup geschrieben werden. Dies füh...
    37: nvram set rc_startup="
    42: nvram commit
    183: ==Temporäre HTML Seite mit NVRAM Inhalt erstellen==
    186: nvram show | sed 's/$/<\br>/' > /tmp/www/nvram.htm
  224. VLAN Support (11,146 bytes)
    20: ... they likely can be reconfigured and tagged using nvram settings as explained on the [[Switched Ports]] p...
    447: ...AN's you need to try to reconfigure them with the nvram variables. Put a port into the WAN VLAN and see i...
    449: ...xactly I want to write it with all the variety of nvram variables that can exist and the nonfunctional VL...
    455: ... Ports]] - Explains how to configure VLAN's using NVRAM variables.
  225. Netgear WNDR3700 (19,494 bytes)
    96: ***This is a Broadcom unit with 64k nvram, identical to WNDR4000.
    116: *Reset via Telnet/SSH if needed: `erase nvram && reboot`
    156: *Via telnet / ssh `nvram erase && reboot`
  226. Asus RT-N13U (27,544 bytes)
    352: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 80 -j DNAT --to 192.168.1...
    353: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 22 -j DNAT --to 192.168.1...
    354: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 21 -j DNAT --to 192.168.1...
  227. IPv6 (教程) (26,913 bytes)
    54: ...at '''jffs is not needed'''. 本指南仅依赖于NVRAM,'''不需要jffs'''。
    428: ...soft.org/projects/ipv6/ipv6.html IPv6 Setup using NVRAM]
    529: ... up IPv6 using Hurricane Electric on DD-WRT v23 - NVRAM]
  228. Netgear WNR834Bv2/zh cn (3,489 bytes)
    27: ...启 JFFS。如果您意外清除了此区段的 NVRAM,您只能通过 JTAG 方法恢复路由器。
    39: * 有效的 NVRAM 备份可以从[http://www.dd-wrt.com/phpBB2/down...
  229. USB storage/zh cn (49,820 bytes)
    327: ... mount a partition, and run a boot-script file in NVRAM
    374: You need to add the ''mount'' command to the NVRAM stored startup script, only add "&" to the end of...
    377: ...e|Option 3C.2]] for further example of using this NVRAM boot script method.
    404: Save in NVRAM using web-GUI -> Administration -> Commands
    533: ...a)''' Start your extra software directly from the NVRAM stored commands (see [[Startup_Scripts]]), or bet...
  230. FON Hotspot on La Fonera (27,637 bytes)
    234: ====== Configure EoIP settings in nvram ======
    236: Once it works, we need to get these settings into nvram in order to make them persistent. First, on the F...
    238: root@fonera:~# nvram show | grep bridgesif
    245: root@fonera:~# nvram set bridgesif="br0>eth0>63 br0>ath0.1>63 br1>ath0...
    246: root@fonera:~# nvram set bridgesif_count=5 ...
  231. AutoAP/zh cn (11,622 bytes)
    22: nvram set wl_ssid=""
    62: ...vior of AutoAP script by setting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to pre...
    65: nvram set autoap_prefssid="my_net*key*abcdef1234"
    66: nvram commit
    71: =NVRAM 变量=
  232. D-Link DIR-615 rev D3 (4,639 bytes)
    33: ...tes. (I don't know if it has to build anything in NVRAM, but better safe than sorry.)
  233. Optware/zh cn (45,404 bytes)
    736: nvram set sys_enable_jffs2=1
  234. 刷机 (18,418 bytes)
    77: ...厂默认设置" 功能并不总是清理整个 nvram 区段。
    83: erase nvram
    129: ...】 。这是由于 SP2 使用了加密方式在 NVRAM 中存储密码。这将导致您在复位路由...
    164: 使用 erase nvram 命令或者重置按钮恢复出厂默认设置
  235. Journalling Flash File System/zh cn (14,236 bytes)
    81: nvram set jffs_mounted=1
    82: nvram set enable_jffs2=1
    83: nvram set sys_enable_jffs2=1
    84: nvram set clean_jffs2=1
    85: nvram set sys_clean_jffs2=1
  236. Cellular Phone/USB Modem as WAN connection/zh cn (18,150 bytes)
    216: ...ing started on when the router boots. You can use nvram set commands if you know how to do it otherwise g...
    253: ...s through the web gui so that they are written to nvram so you don't have to manually add them every time...
    255: ====Change WAN values in nvram====
    256: ...ed. What we do is to change the WAN references in nvram to point to ppp0 instead of the default of eth1. ...
    259: <code># nvram show | grep wan
  237. Запуск сценариев по событию (6,171 bytes)
    61: ...атора отвечает переменная NVRAM '''rc_startup'''. См. основную стат...
    65: ~# nvram set rc_startup="/jffs/etc/config/*.myextension"
    66: ~# nvram commit
    72: ~# nvram set rc_startup="sleep 30; /jffs/etc/config/*.myex...
    73: ~# nvram commit
  238. Linksys WRT100/WRT110 (6,988 bytes)
    77: U-boot NVRAM includes some macros:
    133: 0x003e0000-0x003f0000 : "NVRAM"
    134: 0x003f0000-0x00400000 : "NVRAM_FACTORY"
    141: ...ts router. This is, in turn, caused by userspace NVRAM corruption (e.g., power loss while changing confi...
    158: # At <code>:/&gt;</code> prompt, type <code>nvram restore</code>
  239. IPv6 setup Hurricane Electric Tunnel Broker (8,283 bytes)
    44: #Set below to 1 to use internal NVRAM wan address instead of fetching it from a site
    45: USE_NVRAM_WAN_ADDR_INSTEAD=1
    81: if [ $USE_NVRAM_WAN_ADDR_INSTEAD -eq 1 ]
    83: echo "Fetching WAN IP from NVRAM" >> $STARTUP_SCRIPT_LOG_FILE
    84: WANIP=$(nvram get wan_ipaddr);
  240. Router Dir-320 DD-WRT + WWW + PHP + MySQL + PERL (13,157 bytes)
    225: '''nvram set http_lanport=81'''
    227: '''nvram commit'''
    235: nvram set http_lanport=""
    237: nvram commit
  241. Hard reset or 30/30/30/it (2,269 bytes)
    5: La seguente procedura pulisce la NVRAM e porta il DD-WRT ai valori di default:
    18: '''Cancellazione NVRAM:'''
    22: [ATTENZIONE] - Su alcuni dispositivi, l'NVRAM reset può causare più problemi di quanti ne ris...
    30: "erase nvram
    35: "MTD-r erase nvram"
  242. Firewall Builder/zh cn (6,963 bytes)
    37: ..., because you don't want to store the data in the NVRAM now, but in the jffs file system)
    45: nvram set rc_firewall=/jffs/firewall/firewall.fw
    47: nvram commit
  243. WHR-G300N/zh cn (9,074 bytes)
    38: ...est of these steps are to merely ensure that your NVRAM is cleared of all the old data.
  244. Serial Recovery (13,387 bytes)
    71: ...uilt-in CFE default parameters (restored after a `nvram erase` or reset):
    78: ====Nvram Parameters====
    79: ...e checked with `nvram show`. Also see [[Hardware#NVRAM]]<br>
    80: `nvram set {parameter}="{value}" can be used to change v...
    82: ====Erase Nvram====
  245. Multiple WLANs/zh tw (2,378 bytes)
    21: nvram get wl0_corerev
  246. OpenDNS/zh cn (5,048 bytes)
    39: ...PREROUTING -i br0 -p udp --dport 53 -j DNAT --to `nvram get lan_ipaddr`
    40: ...PREROUTING -i br0 -p tcp --dport 53 -j DNAT --to `nvram get lan_ipaddr`
    48: ...192.168.1.128/25 -p udp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
    49: ...192.168.1.128/25 -p tcp --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
  247. Использование ProFTPd сервера (5,826 bytes)
    35: wanf=`nvram get wan_iface`
  248. What is DD-WRT?/pt (52,338 bytes)
    706: nvram get wl0_corerev<br>
  249. Creación de Redes de Malla con OLSR (6,053 bytes)
    157: <pre>iptables -t nat -A POSTROUTING -o $(nvram get wan_ifname) -j MASQUERADE
    158: ...m get eth1_netmask) -d $(nvram get eth1_ipaddr)/$(nvram get eth1_netmask) -j MASQUERADE
    159: ...ram get lan_netmask) -d $(nvram get lan_ipaddr)/$(nvram get lan_netmask) -j MASQUERADE
  250. Enabling VLAN Support for BCM4704 (6,027 bytes)
    12: ...BCM4704 models which can be enabled by setting an nvram variable via [[Telnet/SSH]] like so:
    14: nvram set force_vlan_supp=enabled
    15: nvram commit
    33: ...ble just tells the firmware to change a few other nvram variables which you can do manually on any Broadc...
    36: The [[Hardware#Boardflags| boardflags]] nvram variables contains a hexadecimal number which tel...

View (previous 250) (next 250) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for