Search results

From DD-WRT Wiki

You searched for Nvram

Jump to: navigation, search

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 100 results starting with #1.


View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).

No page title matches

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    427: ...!''' Er bewirkt das Löschen der Einstellungen im NVRAM und setzt die DD-WRT-Firmware auf Standard-Werte ...
    459: ...stration/Backup] und dort unter "[http://routerip/nvrambak.tgz HERE (gilt nur für DD-WRT-Versionen)]...
    560: * Sollten Probleme auftreten, könnte das NVRAM gelöscht werden müssen. Öffnen Sie...
    562: <pre>mtd erase nvram</pre>
    565: wget http://openwrt.inf.fh-brs.de/~nbd/nvram-clean.sh
  2. Hinzufügen eines SD-Kartenlesers an den Linksys WRT54G (20,102 bytes)
    495: nvram set clkfreq=240
    496: nvram commit
    500: nvram get clkfreq ODER cat /proc/cpuinfo ODER nvram show | grep clkfreq
  3. Alphabetischer Index (1,432 bytes)
    47: *[[DD-WRT_Doku_(DE)#NVRAM|NVRAM]]
  4. Static PPTP VPN Client (18,072 bytes)
    101: You will need to enable JFFS through nvram '''AND''' via the web interface - this was the on...
    114: nvram set rc_startup="sh /jffs/etc/config/my_startup.sh...
    115: nvram commit
    223: ...low using 10.177.0.0 and 255.255.0.0 (no need for nvram if you complete step 9)
  5. Tutorials (8,775 bytes)
    122: *[[Jffs|JFFS - Using nvram to enable Jffs]]
  6. Hardware (18,720 bytes)
    4: ==NVRAM==
    5: NVRAM (non-volatile RAM) also called flash space is the...
    11: *Show the whole NVRAM content:
    12: nvram show
    14: ...ch_pattern> (useful for quickly finding things in NVRAM):
  7. Recover from a bad flash (41,673 bytes)
    38: ...lue exists in the NVRAM. Here simply clearing the NVRAM should solve the problem.
    198: ...AM (the usual cause of the problem) wrt54g -erase:nvram
    203: ...is utility. You are better off flashing the CFE & NVRAM files & then using the normal TFTP method to flas...
    207: ...your hardware. Use the CFE editing tool "IMGTOOL_NVRAM" available from [http://www.bitsum.com/openwiking...
    256: ...rrupt NVRAM settings, this will help us clear the NVRAM. You won't lose your ability to reflash with DD-W...
  8. Glossary (58,851 bytes)
    376: === NVRAM ===
    379: ...[[Hard reset or 30/30/30]]). To erase the entire NVRAM chip with [[Glossary#JTAG|JTAG]] would actually ...
    381: See [[Hardware#NVRAM|NVRAM]] for more info.
  9. WDS Linked router network (21,712 bytes)
    141: ...mpts to save NVRAM files, e.g. nvram_host.bin and nvram_client.bin. These can be restored if the new setu...
  10. Linksys EA6500 V1 (23,843 bytes)
    313: ...o consider. I suggest keeping hard resort/erasing NVRAM as a last resort and if possible try a TFTP inste...
    332: ...ade_from_the_CLI | ABOVE]]]</strong></font> Erase NVRAM by:
    334: #::erase nvram</pre>
    358: ..._or_30/30/30 | 30-30-30/hard reset]] to clear the NVRAM variable that might have broken your setup. This ...
    383: ===Decrease NVRAM size===
  11. Telnet/SSH and the command line (18,436 bytes)
    22: ... set (via telnet or ssh) the sshd_authorized_keys nvram variable.
    24: nvram set sshd_authorized_keys=key1 key2 key3 etc
    63: root@wrt54g:~# nvram set sshd_authorized_keys='ssh-rsa AAAAB4NfaC3yc5 ...
    64: root@wrt54g:~# nvram commit
    240: ...''nvram show'' which list some 800-1200 lines. ''nvram show | more'' will list the results 1 page at a t...
  12. Wl command (24,951 bytes)
    432: print nvram variables to stdout
    434: Use '''nvram show'''!
    437: get the value of an nvram variable
    440: set an nvram variable
  13. Заводские установки (28,571 bytes)
    5: == NVRAM ==
    7: ''Нужно объединить с [[Hardware#NVRAM]].
    9: ...у перезагрузками. Данные в NVRAM также сохраняются между об...
    11: ...димо сбрасывать состояние NVRAM при перепрошивке, чтобы но...
    16: ...роисходит запись настроек NVRAM в двоичный файл. Из-за этог...
  14. Ipkg (tutorial) (10,613 bytes)
    107: nvram set rc_startup=/jffs/etc/init.d/*
    140: nvram set sys_enable_jffs2=1
  15. Iptables command (26,660 bytes)
    179: iptables -I INPUT -p tcp -m tcp -d `nvram get lan_ipaddr` --dport 22 -j logaccept
    180: ...an_ipaddr` --dport 2222 -j DNAT --to-destination `nvram get lan_ipaddr`:22
    224: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 8000 -j DNAT --to 192.168...
    229: iptables -t nat -I PREROUTING -p tcp -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
    233: ... -t nat -I PREROUTING -p tcp -s 123.45.67.89 -d $(nvram get wan_ipaddr) --dport 443 -j DNAT --to 192.168....
  16. Quality of Service (14,843 bytes)
    147: ...wnlink` `nvram get wshaper_uplink` `get_wanface` `nvram get wan_mtu` 0
    152: ...link` `nvram get wshaper_downlink` `get_wanface` `nvram get wan_mtu` 0
    157: ...nvram set wshaper_downlink='''[downlink rate]'''; nvram set wshaper_uplink='''[uplink rate]''';
    158: ...nvram set wshaper_downlink='''[downlink rate]'''; nvram set wshaper_uplink='''[uplink rate]''';
    165: ..."red">If you need to alter down/up rates edit the nvram variables before restarting wshaper</font>
  17. Index:Misc/ja (966 bytes)
    18: * [[Hardware#NVRAM|NVRAM]]
  18. Separate LAN and WLAN (outdated) (15,234 bytes)
    37: Set the ''lan_ifname'' nvram variable to vlan0
    42: commit to nvram
    86: nvram set lan_ifname=vlan0
    87: nvram commit
    121: option dns $(nvram get wan_dns)
  19. IPv6 (tutorial) (36,148 bytes)
    99: * This guide only relies on nvram variables, so that '''jffs is not needed'''.
    635: ...soft.org/projects/ipv6/ipv6.html IPv6 Setup using NVRAM]
    740: ... up IPv6 using Hurricane Electric on DD-WRT v23 - NVRAM]
  20. Scripting (1,005 bytes)
    8: ... rely heavily on the javascript dd-wrt libraries, nvram program and on generic linux commands. Every rout...
    12: * [[Startup Scripts]] - web-GUI method, NVRAM method, and more
  21. Miscellaneous (1,602 bytes)
    34: * [[Hardware#NVRAM|NVRAM]]
  22. Startup Scripts (8,579 bytes)
    25: ...rtup'' variable in flash memory (also known as an NVRAM variable). Since flash memory doesn't get erased ...
    33: =NVRAM Method=
    45: nvram set rc_startup="
    52: When you give the command ''nvram commit'' the ''rc_startup'' variable is saved in ...
    54: nvram commit
  23. Samba filesystem (12,586 bytes)
    34: nvram set samba_user="username"
    35: nvram set samba_password="password"
    37: ...re -o username=$(nvram get samba_user),password=$(nvram get samba_password)
  24. Journalling Flash File System (15,008 bytes)
    91: nvram set jffs_mounted=1
    92: nvram set enable_jffs2=1
    93: nvram set sys_enable_jffs2=1
    94: nvram set clean_jffs2=1
    95: nvram set sys_clean_jffs2=1
  25. OpenVPN (29,209 bytes)
    127: ...CATE-----</tt> is necessary; as it is stored in [[nvram]], everything else from that file should be remov...
    186: ...CATE-----</tt> is necessary; as it is stored in [[nvram]], everything else from that file should be remov...
  26. Static DHCP (7,133 bytes)
    43: nvram set static_leasenum=X (where X is the total numbe...
    44: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
    57: nvram set static_leasenum=X (where X is the total numbe...
    58: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
    62: nvram set static_leases="00:11:22:33:44:55=name1=IP-Add...
  27. Bootvorgang (68,911 bytes)
    97: 0x003f0000-0x00400000 : "nvram"
    250: nvram NVRAM utility.
    339: ==='''nvram'''===
    342: CFE> help nvram
    346: NVRAM utility.
  28. Firewall Builder (7,019 bytes)
    37: ..., because you don't want to store the data in the NVRAM now, but in the jffs file system)
    45: nvram set rc_firewall=/jffs/firewall/firewall.fw
    47: nvram commit
  29. Beschreibung der einzelnen Einstellungen (25,263 bytes)
    170: ...lan.de/index.php?title=DD-WRT_Doku_%28DE%29#NVRAM nvram] anzeigen lassen.
    325: ...://192.168.1.1/nvrambak.tgz http://<YourRouterIP>/nvrambak.tgz] in den Browser heruntergeladen werden.<br...
    326: ...://192.168.1.1/nvrambak.bin http://<YourRouterIP>/nvrambak.bin]
  30. Linksys WRT610N (11,615 bytes)
    11: root@ap-ssn:~# '''nvram show|egrep 'bootnv|pmon''''
    101: nvram set safe_mode_upgrade=on
    102: nvram commit
    132: nvram set "pci/1/1/macaddr"=00:90:4C:D6:02:2a
    133: nvram commit
  31. JTAG-adapter (3,810 bytes)
    60: ...you can modify are cfe (the broadcom bootloader), nvram (the system nonvolatile ram), kernel(the system) ...
    63: ...easiest way to debrick is to erase the kernel and nvram. After a powercycling the router it will wait for...
  32. JTAG-adapter/de (3,751 bytes)
    7: ... ganz gezielt bestimmte Bereiche (CFE, Kernel und NVRAM) des Intel-Flash-Chips zu sichern, löschen oder ...
    58: <pre>./wrtjtag -erase:nvram</pre>
    61: Es wird nun der NVRAM-Bereich gelöscht. Nach erfolgreichem Löschen de...
  33. Transparent web proxy (7,628 bytes)
    42: LAN_IP=`nvram get lan_ipaddr`
    43: LAN_NET=$LAN_IP/`nvram get lan_netmask`
  34. USB storage (55,588 bytes)
    388: ... mount a partition, and run a boot-script file in NVRAM
    435: You need to add the ''mount'' command to the NVRAM stored startup script, only add "&" to the end of...
    438: ...e|Option 3C.2]] for further example of using this NVRAM boot script method.
    465: Save in NVRAM using web-GUI -> Administration -> Commands
    594: ...a)''' Start your extra software directly from the NVRAM stored commands (see [[Startup_Scripts]]), or bet...
  35. Simple Network Management Protocol (12,816 bytes)
    40: nvram set snmpd_conf="syslocation <your_location>
    48: nvram commit
  36. DNSMasq als DHCP Server (3,337 bytes)
    41: echo -ne `nvram get lan_ipaddr` >> /etc/hosts
    42: echo -e "\t"`nvram get router_name` >> /etc/hosts
  37. DNSMasq as DHCP server (15,841 bytes)
    59: Use NVRAM for client lease DB enabled DNSmasq does not star...
  38. HTTP Redirect (3,828 bytes)
    30: nvram set http_redirect_enable=0
    31: nvram commit
  39. NoCatSplash (16,616 bytes)
    122: ...also have to type "nvram set NC_Verbosity=3" and "nvram commit"<br/>
    144: ; nvram entries:
    145: nvram show | grep NC
  40. Buffalo WBR-G54 WLA-G54 WLA-G54C WBR2-G54 WBR2-G54S (8,489 bytes)
    4: ...leshooting section, and then issuing a 'mtd erase nvram' command. Then you can overwrite OpenWRT with DD-...
    67: ... use troubleshoot-mode and it kind of repairs the NVRAM... (worked for me, Esa Häkkinen 2006-02-02 <esa....
    73: ...ter (username: root , password: admin , mtd erase nvram [enter], reboot [enter].
    75: ...ram (username: root , password: admin , mtd erase nvram [enter], reboot [enter]. This will bring back the...
    77: '''Please note:''' Clearing nvram will also change the MAC addresses from 00:07:40:...
  41. VLAN Detached Networks each with Wireless and Internet (4,809 bytes)
    28: nvram set vlan0ports="1 2 3 5*"
    29: nvram set vlan2ports="0 5*"
    31: nvram set rc_startup='
    44: nvram set rc_firewall='
    50: nvram commit
  42. Separate LAN and WLAN (5,383 bytes)
    13: nvram get wl0_ifname
  43. TP Link Archer A7v5 (7,003 bytes)
    44: ...eset the router, telnet in and issue the command "nvram erase && reboot" without the quotes.
  44. Mesh Networking with OLSR (6,999 bytes)
    185: <pre>iptables -t nat -A POSTROUTING -o $(nvram get wan_ifname) -j MASQUERADE
    186: ...m get eth1_netmask) -d $(nvram get eth1_ipaddr)/$(nvram get eth1_netmask) -j MASQUERADE
    187: ...ram get lan_netmask) -d $(nvram get lan_ipaddr)/$(nvram get lan_netmask) -j MASQUERADE
  45. DD-WRT Manual (SE) (30,300 bytes)
    208: ...an (observera att manualens sätt att nollställa NVRAM minnet, att hålla reset knappen intryckt i 15 se...
    319: ...nvändarnamn: root , lösenord: admin , mtd erase nvram [enter] , reboot [enter].
    321: ...nvändarnamn: root , lösenord: admin , mtd erase nvram [enter], reboot [enter]. Detta kommer väcka upp ...
    323: '''OBS:''' Att nollställa nvram kommer även att ändra MAC adressen från 00:07:...
  46. Useful Scripts (54,380 bytes)
    77: ...LL - Location & Name of script File with all nvram variables
    78: ... - Location & Name of script File with essential nvram variables
    79: ... - Location & Name of script File with dangerous nvram variables
    80: ... - Location & Name of script File with preferred nvram variables
    85: MAC=`nvram get lan_hwaddr | tr -d ":"`
  47. Switched Ports (21,983 bytes)
    8: ...f "basic" setups that are not properly handled in NVRAM by the GUI
    23: ...mands'' GUI!) and run these commands to check the nvram variables for your default vlan configuration bef...
    25: nvram show | grep vlan.*ports | sort
    26: nvram show | grep port.*vlans | sort
    27: nvram show | grep vlan.*hwname | sort
  48. Router Slowdown (14,417 bytes)
    80: ...o set this value before booting (and there was no nvram setting for that?).
    95: nvram set ip_conntrack_max=16384
    96: nvram commit
    157: ...ering, the 'prefix' var is there to save space in nvram.
    201: nvram set clkfreq=216
  49. PPTP Server Configuration (20,228 bytes)
    264: ...d to the client, you can set/commit the following nvram params:
    268: nvram set pptpd_dns1=ip-address-of-first-dns-server
    269: nvram set pptpd_dns2=ip-address-of-second-dns-server
    270: nvram set pptpd_wins1=ip-address-of-first-wins-server
    271: nvram set pptpd_wins2=ip-address-of-second-wins-server
  50. USRobotics USR5461 (11,735 bytes)
    10: USR5461 has only 2MB of NVRAM which contains 128KB compressed CFE (Boot Loader)...
    122: ...he router is flashing the new firmware image into NVRAM, and then reboots, all on its own.
  51. Broadcom CFE backup (3,803 bytes)
    34: The same can be done with the ''nvram'', ''kernel'', etc.
  52. Motorola WR850G (8,284 bytes)
    19: ...ot of other motorola-specific data got wiped from NVRAM also, so it probably won't be possible to revert ...
  53. DD-WRT on WR850G v1 (deutsch) (17,039 bytes)
    17: ...es eingebettetes Flash-Image, welches sich in den NVRAM-Abschnitt setzt, wenn etwas fehlerhaft ist oder d...
    45: ...ellungen erwähnt (offensichtlich wird sie in das NVRAM-Image eingesetzt, dort gibt es eine Zeichenkette ...
    91: ...o?): führen Sie <b> NIEMALS </b> <code>mtd erase nvram</code> auf dem WR850G aus.<br>
    96: ...07 fast voll unterstützt. Da die MAC-Adressen im NVRAM gespeichert werden, werden sie bei einem Reset au...
    208: ... arbeitet nur, wenn alle DD-WRT-Einträge aus dem NVRAM entfernt worden sind, aber was soll's)</i><br>
  54. WEB server (4,541 bytes)
    49: ... is to set the http_lanport nvram variable in the nvram:
    51: nvram set http_lanport=81
    52: nvram commit
    71: nvram set rc_firewall=""
    72: nvram commit
  55. WR850G v1 (26,232 bytes)
    34: ...asp</code> page as well which gives access to all NVRAM settings.)</i><br>
    43: ...t makes it really hard: 4.03, with more than 1000 NVRAM entries created by DD-WRT, doesn't allow to resto...
    86: ...ware reset to write this encrypted strings to the nvram. But, as stated below we can '''never do a factor...
    90: ...ace, clear the username/password variables in the nvram, by executing the
    94: nvram set http_username=
  56. Spanning Tree Protocol (29,361 bytes)
    371: ... which link is which.. hmm. that is stored in the nvram variables
    377: root@Main:~# nvram show | grep wds[23]_ | sort
    458: root@Media:~# nvram show | grep wds[12]_ | sort
  57. Factory Defaults (25,206 bytes)
    6: =NVRAM=
    8: ''Merge needed with [[Hardware#NVRAM]].
    10: ...t stores persistent settings between reboots. The NVRAM is also retained between flashes of different fir...
    12: ...t the new firmware encounters known values in the NVRAM.
    17: ...save your settings to a file, you are dumping the NVRAM settings to a binary file. Because of this, you s...
  58. Installation (20,950 bytes)
    88: ...This is probably not needed, but if the memory or nvram is almost full, a firmware update can brick it. ...
    95: ... [[Hard_reset_or_30/30/30#Erasing_NVRAM|erase the nvram]].
    155: ...e version changes) via ''erase nvram'' '''or''' ''nvram erase''
    156: ...ee [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]] for details.
    172: nvram set dns_dnsmasq=1
  59. Netgear R9000 (8,270 bytes)
    89: ...ion -> Factory Defaults"'' page or via telnet/ssh nvram erase && reboot.
  60. Netgear WNR834Bv1 (3,922 bytes)
    11: ...unless the nvram has been erased using the CFE's "nvram erase" command then it will need flashing with th...
  61. Linksys WRT54G-TM (9,840 bytes)
    119: 2a). nvram set et0macaddr=your mac here (format = XX:XX:XX:X...
    120: Example: nvram set et0macaddr=00:10:20:30:40:A1
    126: 5a). nvram commit
    130: Note: the nvram set et0macaddr and the nvram commit can be combined in the commands box.
    133: nvram set et0macaddr=xx:xx:xx:xx:xx
  62. Asus WL-500W (8,082 bytes)
    15: ...ighly''' recommended as well as a clearing of the NVRAM. Starting from a clean slate will provide the sm...
  63. Dual-WAN for simple round-robin load equalization (7,746 bytes)
    12: nvram set vlan0ports="1 2 3 5*"
    13: nvram set vlan2ports="4 5"
    14: nvram set vlan2hwname=et0
    15: nvram commit
    29: if [ "$(nvram get wan2_ipaddr)" != "$WAN2_IPADDR" ]; then
  64. Access To Modem Configuration (8,284 bytes)
    17: ...m get wan_ifname) for `nvram get wan_ifname)` if `nvram get wan_ifname)` does not work.''
    24: ifconfig `nvram get wan_ifname`:0 10.0.0.2 netmask 255.255.255.0
    27: iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE
    32: ...5.255.255.0<br>iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE
    36: ...ish to enter it manually, you should run '''echo `nvram get wan_ifname`''' to get your WAN interface name...
  65. Wireless access point (16,324 bytes)
    137: if test `hostname` != `nvram get wan_hostname`; then
    138: nvram set wan_hostname=`hostname`;
    139: nvram set router_name=`hostname`;
    140: nvram commit;
    149: route add default gw `nvram get wan_gateway`
  66. WHR-HP-G54 (24,374 bytes)
    91: 0x003f0000-0x00400000 : "nvram"
    140: ''Note: <code>nvram show | grep gpio</code> shows '''14''' available ...
    153: <pre>nvram get boardflags</pre>
    157: <pre>nvram set boardflags=0x3758
    158: nvram commit
  67. Instalación (27,687 bytes)
    105: ...rante 30 segundos. De esta manera, se vaciará la NVRAM, la configuración que hubiera y el usuario/passw...
    129: ... '''Nota:''' El paso 2b (la limpieza manual de la NVRAM) es recomendada para asegurarse que el radio obte...
  68. Soporte (7,376 bytes)
    47: También, nunca olvides limpiar tu nvram (resetear tu router a los valores de fabrica) ant...
    71: ... WL-500G Deluxe despues de flash DD-WRT fallido o NVRAM Corrupta.
    77: ...por OLEG de http://www.wl500g.info . Renombralo a nvram.trx!
    96: ...md) de windows y escribe: tftp -i 192.168.1.1 PUT nvram.trx, and wait 5 min. Reinicia tu router y ejecuta...
  69. WAN Traffic By Month (1,740 bytes)
    13: You can look at the raw data in NVRAM.
    17: nvram show | grep traff[-_]
    22: The traffic data is kept in nvram variables that look like this:<br>
    31: nvram get traff-06-2008
    34: nvram set traff-04-2008="1:1 1:1"
  70. Instalación en el enrutador WRT54G(S) versión 5 (8,885 bytes)
    85: ...e inferior del router. Sigue esto con el comando 'nvram commit' y luego 'reboot'.
  71. Dynamic DNS (28,564 bytes)
    780: <pre>nvram set ddns_loglevel=[debug|info|notice|warning]</pr...
    783: <pre>nvram set ddns_loglevel=debug</pre>
    792: <pre>nvram unset ddns_loglevel && service ddns restart</pre>
  72. Lentitud del Router (4,693 bytes)
    71: nvram set clkfreq=216
    72: nvram commit
  73. Telnet/SSH y la Linea de Comandos (8,677 bytes)
    29: ...telnet o ssh) la variable sshd_authorized_keys de nvram.
    31: nvram set sshd_authorized_keys=key1 key2 key3 etc
  74. Tutorial de instalación para WRT54G v4 (8,925 bytes)
    48: ...del router por unos 30 segundos. Esto limpiara tu NVRAM, la configuración y reseteará la contraseña a ...
    131: ... mas arriba. Nota: el paso 2b (limpieza manual de NVRAM) es recomendada para asegurarte que el radio obte...
  75. Instala tu Buffalo WBR-G54, WLA-G54, ... (5,367 bytes)
    65: ... "a prueba de fallos" y de alguna forma repara la NVRAM... (a mi me funcionó, Esa Häkkinen 2006-02-02 <...
    70: ...r (usuario: root , contraseña: admin , mtd erase nvram [enter], reinicia [enter].
    72: ...M (usuario: root , contraseña: admin , mtd erase nvram [enter], reinicia [enter]. Esto devolvera los pue...
    74: '''Toma en cuenta:''' Limpar la NVRAM cambiará las direcciones MAC de 00:07:40:xx:xx:x...
    76: nvram set et0macaddr=xx:xx:xx:xx:xx:xx
  76. 什么是 "DD-WRT"? (53,158 bytes)
    705: nvram get wl0_corerev<br>
  77. Enable 16MB RAM on WRT54GS v5 (585 bytes)
    3: nvram set sdram_init=0x0A
    4: nvram set sdram_ncdl=0
    5: nvram commit
  78. Optware (46,421 bytes)
    740: nvram set sys_enable_jffs2=1
  79. Multiple DDNS Accounts (7,338 bytes)
    16: ...nt information in nvram. On router startup, these nvram values are written into files in /tmp/ddns for in...
  80. 刷新您的Buffalo WBR-G54,WLA-G54,WBR2-G54,WBR2-G54S... (5,336 bytes)
    69: ... use troubleshoot-mode and it kind of repairs the NVRAM... (worked for me, Esa Häkkinen 2006-02-02 <esa....
    74: ...ter (username: root , password: admin , mtd erase nvram [enter], reboot [enter].
    76: ...ram (username: root , password: admin , mtd erase nvram [enter], reboot [enter]. This will bring back the...
    78: '''Please note:''' Clearing nvram will also change the MAC addresses from 00:07:40:...
    80: nvram set et0macaddr=xx:xx:xx:xx:xx:xx
  81. MN-700 (10,914 bytes)
    14: ...lds will brick the router, you will have to clear NVRAM through JTAG (recovery mode will NOT work).
    28: There are several ways the MN-700's NVRAM can be reset.
    33: ...m firmware to be installed on the MN-700 to reset NVRAM.
    80: === NVRAM Protection ===
    81: ...ver boots) and can only be unbricked by resetting NVRAM through a JTAG connector. I can't define ''exces...
  82. Universal Wireless Repeater (9,297 bytes)
    63: nvram set wl_ssid=""
  83. Configuraciones, (COMO HACERLO o HOWTOs) (8,212 bytes)
    203: los valores NC_ de la nvram.
    234: ...e presentacion de dd-wrt guarda los valores en la nvram con
    235: el siguinte comando: nvram show | grep NC_
  84. Firmware FAQ (40,468 bytes)
    68: ...iewtopic.php?p=1112621#1112621 expand the default nvram]
    127: ...(sometimes called factory defaults) are stored in NVRAM. For more information, see [[Factory_Defaults|Fac...
    183: == How do I clear the NVRAM? Reset to factory/firmware defaults? Cold reboot?...
    190: ...ssue is found] (to verify it isn't related to the nvram)
    194: ... the new firmware, or similarly, if almost out of nvram. Flashing to or from other third-party firmware ...
  85. Dual WAN with one as standby backup (4,340 bytes)
    19: dynamic will require some changes (hint: <code>nvram set wan2_proto=dynamic</code>)
    22: ...ed the first WAN connection (tied to vlan1) using nvram
    29: nvram set vlan0ports="1 2 3 5*"
    30: nvram set vlan2ports="4 5"
    31: nvram set vlan2hwname=et0
  86. Known incompatible devices (18,777 bytes)
    1087: ... BCM5354 SOC<br>2MB Flash/8MB RAM<br>incompatible nvram size
    1094: ...BCM5356 SOC<br>4MB Flash/16MB RAM<br>incompatible nvram size
    1108: ...BCM5356 SOC<br>4MB Flash/16MB RAM<br>incompatible nvram size
  87. Version 5 And 6 Router Information (5,963 bytes)
    43: Some report that you can clear the nvram by plugging in the router while shorting pin 16. ...
  88. Reset And Reboot (4,732 bytes)
    11: ...ehaviour here is for it to not actually clear the nvram, although many people think of it and phrase it t...
    16: ...results. Some platforms will completely empty the nvram and depend on another stage of the bootloader or ...
    21: ...o do it three times till it fully cleared out the nvram on mine" I think this forum poster actually meant...
    28: It should be noted that this will not clear the nvram nor reset the router back to factory/firmware def...
    30: === Clearing The nvram ===
  89. D-Link DIR-615 rev C (10,866 bytes)
    59: ...tes. (I don't know if it has to build anything in NVRAM, but better safe than sorry.)
  90. Miscellaneous/zh cn (971 bytes)
    21: * [[Hardware#NVRAM|NVRAM]]
  91. Installation/ja (27,080 bytes)
    165: Restore factory defaults using erase nvram command or reset button
  92. Gateworks Avila/Cambria Installation (14,682 bytes)
    188: ...create -b 0x00800000 -f 0x050FC0000 -l 0x00020000 nvram
  93. 启动脚本 (7,822 bytes)
    25: ...rtup'' variable in flash memory (also known as an NVRAM variable). Since flash memory doesn't get erased ...
    27: =NVRAM Method=
    39: nvram set rc_startup="
    46: When you give the command ''nvram commit'' the ''rc_startup'' variable is saved in ...
    48: nvram commit
  94. AutoAP (11,662 bytes)
    25: nvram set wl_ssid=""
    65: ...vior of AutoAP script by setting [[Hardware#NVRAM|NVRAM]] variables. For example, let's set AutoAP to pre...
    68: nvram set autoap_prefssid="my_net*key*abcdef1234"
    69: nvram commit
    74: =NVRAM Variables=
  95. Linksys WRTSL54GS (13,481 bytes)
    119: 0x007e0000-0x00800000 : "nvram"
    225: nvram set jffs_mounted=1
    226: nvram set enable_jffs2=1
    227: nvram set sys_enable_jffs2=1
    228: nvram set clean_jffs2=1
  96. Micro-plus (26,693 bytes)
    137: ...xr-x 1 root root 3583 Jan 1 2009 nvram
    519: mtd3: 00010000 00010000 "nvram"
  97. LaFonera Software Flashing (30,993 bytes)
    172: ...oot header does not care about network setting in NVRAM, therotically maybe they are right but my device ...
    306: fis create -f 0xA83D0000 -l 0x00010000 -n nvram
    339: ...edBoot> fis create -f 0xA83D0000 -l 0x00010000 -n nvram
    350: =Resetting NVRAM=
    351: ...tion is corrupted/incorrect, try resetting of the NVRAM. Power up the unit, and wait about 2 minutes, the...
  98. Routeurs en mode réseau WDS (6,113 bytes)
    41: ...les fichiers de la nvram (i.e. nvram_host.bin, et nvram_client.bin). Les configurations pourront être re...
  99. LaFonera Software Chilispot (12,365 bytes)
    105: fis create -f 0xA83D0000 -l 0x00010000 -n nvram
  100. LaFonera Software Universal-Repeater (25,850 bytes)
    683: nvram set wl_ssid=""

View (previous 100) (next 100) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for